2. ASA Electronics
  3. JHD1630FRD

ASA Electronics JHD1630FRD Operating instructions

  • Hello! I'm a chat assistant, and I've reviewed the Work Instruction for Harness JHD1630FRD. This document outlines the necessary steps for preparing the parts for the harness, including pulling the parts per work order, placing them in a box, labeling the box, and obtaining a first article inspection. I'm ready to answer your questions about this process.
  • What is the first step in the work instruction?
    What should be done after placing parts in the box?
    What is the final step in the work instruction?
Date: 8/16/2022
Written By
Doc. Revision: A R. Priddy
Revision Date: Approved By
ASA Model #: JHD1630FRD Joe Caban
Work Instruction: JHD1630FRD
1. Pull parts per JDE work order
2. Place parts in the box
3. Put label on the outside of the box.
4. Get First article inspection.
8/16/2022 1
/