Attach the Leg(B) to the Base Plate(C) using Bolts(①) and Spring Washers(②) with
the Allen Key(③).
DO NOT fully tighten the bolts at this time.
Repeat the same process to attach the remaining Leg(B).
With the assistance from an adult partner,Turn the Coffee Table right sideup and
test for wobbles. If there are no wobbles, gently, turn it upside down again.
Now, in a sequential manner, tighten all Bolts until they are secure and firm.
Turn your pre-assembled the Coffee Table right side up.
Your Coffee Table is ready for use.
Caution: This Coffee Table can only be used on a flat, level surface.