Noble House 13080 Operating instructions

Brand: Noble House

Model: 13080

Type: Operating instructions

This manual is also suitable for

Label Picture Description QTY

R Top Panel 1

S Front/Back Panel 2

T Side Panel with Legs 2

Caution : You must read this before you proceed

Table

Noble House Home Furnishings LLC

Page 1 OF 6

Label Picture Description QTY

① Bolt Cap 13

②

Bolt (M6*45mm) 13

③

Washer 13

④

Spring Washer

(Ø16*2mm)

⑤

Allen Key 1

Before Beginning

Assembly:

Noble House Home Furnishings LLC

Page 2 OF 6

Open the carton and place all parts on a clean, non-marring surface.

Attach the Side Panels with Legs(T) to the Front and Back Panels(S) using Bolts(②), Spring Washers(④)

and Washers(③) with Allen Key(⑤) as shown above.

Do not fully tighten the Bolts.

Overview

This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of

the Table parts, the above picture is to help you put the various parts into perspective. Please read

through the instructions below to familiarise yourself with the parts and steps before assembly.

Step 1

Top Panel(R)

Side Panel with Legs(T)

Front Panel(S)

Noble House Home Furnishings LLC

Page 3 OF 6

Step 2

Place the Top Panel(R) facedown on a clean and soft surface.

With the help of your adult partner, turn the Table Frame over and place it onto the Top Panel(R) as

shown above.

Attach the Top Panel(R) to the Front and Back Panels(S) and Side Panels with Legs(T) using Bolts(②),

Spring Washers(④) and Washers(③) with Allen Key(⑤) as shown above.

Tighten all Bolts at all joints completely at this stage.

Step 3

Use the Bolt Cap(①) to cover all Bolts.

Noble House Home Furnishings LLC

Page 4 OF 6

Step 4

Your Table is ready for use.

This Table can only be used on a flat, level surface.

Place the Table on a level surface to check the wobbles.

If the Table wobbles, adjust the Levelers on the bottom of the Legs to make it level.

Step 5

Noble House Home Furnishings LLC

Page 5 OF 6

What is Proposition 65?

Proposition 65 is a California law that requires warning labels on products that may contain one of

more than 800-plus chemicals or ingredients that the California Office of Environmental Health

Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.

Chemicals and elements on this list include wood dust, brass, and other everyday substances,

which can be found in very common household items, such as: lamps, tableware, jewelry, crystal

glasses, electric cords, beauty products, automobiles, and furniture.

Why Did I Find a Proposition 65 Warning on My Home Goods Product?

We include Proposition 65 warnings on all of our products because there is always a chance that

one of the 800-plus common chemicals and ingredients listed under this law could potentially be

on our furniture or packing materials. We risk large fines under this law, if we don't include this

warning.

Should I worry?

We realize you may be worried finding this warning on our products, but we want to reassure you

that the hazardous exposure limits for any of these chemicals have never been found on furniture

products that we’ve shipped to our customers. Additionally, this warning label is very common

and can be found on almost every piece of furniture sold in the state of California.

Just How Common Are Proposition 65 Warnings?

Proposition 65 warnings have become so common in California that it is hard to take a trip to a

local bank, grocery store, or restaurant without finding at least one warning. In fact, even the

Disney Land Resort has a Proposition 65 warning:

Noble House Home Furnishings LLC

Page 6 OF 6

Label Picture Description QTY

O Top Panel 1

P Front/Back Panel 2

Q Side Panel with Legs 2

Caution : You must read this before you proceed

Ottoman

Noble House Home Furnishings LLC

Page 1 OF 6

U Seat Cushion 1

Label Picture Description QTY

① Bolt Cap 13

②

Bolt (M6*45mm) 13

③

Washer 13

④

Spring Washer

(Ø16*2mm)

⑤

Allen Key 1

Before Beginning

Assembly:

Noble House Home Furnishings LLC

Page 2 OF 6

Open the carton and place all parts on a clean, non-marring surface.

Attach the Side Panels with Legs(Q) to the Front and Back Panels(P) using Bolts(②), Spring Washers(④)

and Washers(③) with Allen Key(⑤) as shown above.

Do not fully tighten the Bolts.

Overview

This Ottoman has multiple parts and may require up to 30 minutes to assemble. To give you an overview

of the Ottoman parts, the above picture is to help you put the various parts into perspective. Please read

through the instructions below to familiarise yourself with the parts and steps before assembly.

Step 1

Top Panel(O)

Side Panel with Leg(Q)

Front Panel(P)

Seat Cushion(F)

Noble House Home Furnishings LLC

Page 3 OF 6

Step 2

Place the Top Panel(O) facedown on a clean and soft surface.

With the help of your adult partner, turn the Table Frame over and place it onto the Top Panel(O) as

shown above.

Attach the Top Panel(O) to the Front and Back Panels(P) and Side Panels with Legs(Q) using Bolts(②),

Spring Washers(④) and Washers(③) with Allen Key(⑤) as shown above.

Tighten all Bolts at all joints completely at this stage.

Step 3

Use the Bolt Cap(①) to cover all Bolts.

Noble House Home Furnishings LLC

Page 4 OF 6

Step 4

Place the Seat Cushion(U) on the ottoman.

Your Ottoman is ready for use.

This Ottoman can only be used on a flat, level surface.

Place the Ottoman on a level surface to check the wobbles.

If the Ottoman wobbles, adjust the Levelers on the bottom of the Legs to make it level.

Step 5

Noble House Home Furnishings LLC

Page 5 OF 6