Philips DFU TS3258 User manual

Brand: Philips

Model: DFU TS3258

Category: CRT TVs

Type: User manual

This manual is also suitable for

DFU

TS3258

TS3658

Once your PHILIPS MAGNAVOX purchase is registered, you’re eligible to receive all the privileges of

owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card

enclosed with your purchase at once. And take advantage of these important benefits.

Return your Warranty Registration card today to ensure you

receive all the benefits you’re entitled to.

Congratulations

on your

purchase,

and welcome to the

“family!”

Dear PHILIPS MAGNAVOX product owner:

Thank you for your confidence in PHILIPS MAGNAVOX. You’ve selected one of the best-built, best-

backed products available today. And we’ll do everything in our power to keep you happy with your

purchase for many years to come.

As a member of the PHILIPS MAGNAVOX “family,” you’re entitled to protection by one of the most

comprehensive warranties and outstanding service networks in the industry.

What’s more, your purchase guarantees you’ll receive all the information and special offers for which

you qualify, plus easy access to accessories from our convenient home shopping network.

And most importantly you can count on our uncompromising commitment to your total satisfaction.

All of this is our way of saying welcome–and thanks for investing in a PHILIPS MAGNAVOX product.

Sincerely,

Robert Minkhorst

President and Chief Executive Officer

Know these

safety

symbols

t This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical

shock. For the safety of everyone in your household, please do not remove product covering.

s The “exclamation point” calls attention to features for which you should read the enclosed lit-

erature closely to prevent operating and maintenance problems.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT

TO RAIN OR MOISTURE.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.

ATTENTION: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la

borne correspondante de la prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warranty

Verification

Registering your product within

10 days confirms your right to

maximum protection under the

terms and conditions of your

PHILIPS MAGNAVOX warranty.

Owner

Confirmation

Your completed Warranty

Registration Card serves as

verification of ownership in the

event of product theft or loss.

Model

Registration

Returning your Warranty

Registration Card right away guar-

antees you’ll receive all the infor-

mation and special offers which

you qualify for as the owner of your

model.

P.S. Remember, to get the most from your PHILIPS

MAGNAVOX product, you must return your

Warranty Registration Card within 10 days. So

please mail it to us right now!

Hurry!

Visit our World Wide Web Site at http://www.philipsmagnavox.com

SAFETY INSTRUCTIONS - Read before operating equipment

This product was designed and manufactured to meet strict quality and

safety standards. There are, however, some installation and operation pre-

cautions which you should be particularly aware of.

1. Read Instructions - All the safety and operating instructions should

be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions should

be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the operating

instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be

followed.

5. Water and Moisture - The appliance should not be used near water

- for example, near a bathtub, washbowl, kitchen sink, laundry tub,

in a wet basement or near a swimming pool, etc.

6. Carts and Stands - The appliance should be used only with a cart or

stand that is recommended by the manufacturer.

6A. An appliance and cart combination should be moved

with care. Quick stops, excessive force, and uneven sur-

faces may cause the appliance and cart combination to

overturn.

7. Wall or Ceiling Mounting - The appliance should be mounted to a

wall or ceiling only as recommended by the manufacturer.

8. Ventilation - The appliance should be situated so that its location or

position does not interfere with its proper ventilation. For example,

the appliance should not be situated on a bed, sofa, rug, or similar

surface that may block the ventilation openings; or, placed in a built-

in installation, such as a bookcase or cabinet that may impede the

flow of air through the ventilation openings.

9. Heat - The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (includ-

ing amplifiers) that produce heat.

10. Power Sources - The appliance should be connected to a power sup-

ply only of the type described in the operating instructions or as

marked on the appliance.

11. Power-Cord Protection - Power supply cords should be routed so

that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords and plugs,

convenience receptacles, and the point where they exit from the

appliance.

12. Cleaning - The appliance should be cleaned only as recommended

by the manufacturer.

13. Power Lines - An outdoor antenna should be located away from

power lines.

14. Outdoor Antenna Grounding - If an outside antenna is connected to

the receiver, be sure the antenna system is grounded so as to pro-

vide some protection against voltage surges and built up static

charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,

provides information with respect to proper grounding of the mats

and supporting structure grounding of the lead-in wire to an anten-

na discharge unit, size of grounding connectors, location of antenna-

discharge unit, connection to grounding electrodes and require-

ments for the grounding electrode. See Fig. below.

15. Non-use Periods - The power cord of the appliance should be

unplugged from the outlet when left unused for a long period of time.

16. Object and Liquid Entry - Care should be taken so that objects do not

fall and liquids are not spilled into the enclosure through openings.

17. Damage Requiring Service - The appliance should be serviced by

qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appliance;

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

18. Servicing - The user should not attempt to service the appliance

beyond that described in the operating instructions. All other servic-

ing should be referred to qualified service personnel.

Note to the CATV system installer: This reminder is provided to call the

CATV system installer's attention to Article 820-40 of the NEC that pro-

vides guidelines for proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system of the building,

as close to the point of cable entry as practical.

MAC3964

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE (NEC)

Example of Antenna Grounding

as per NEC - National Electric Code

Introduction

Welcome/Registration of Your TV............................2

Safety/Precautions .....................................................3

Table of Contents.......................................................4

Features......................................................................5

On-Screen MENU

Picture

✧ Adjusting the TV Picture ...................................6

Features

✧Setting the TV’s On-screen Clock......................7

✧Activating the TV’s On Timer Control...............8

✧Selecting the TV’s On Timer Channel ..............9

✧Setting the TV’s On Timer Startup Time..........10

✧Turning on the On Timer Display.....................11

✧Setting the Access Code within SmartLock .....12

✧Using SmartLock to Block Channels ...............13

✧Using the Noise Reduction (NR) Control ........14

✧Using the Contrast + Control............................14

✧Setting the TV for Closed Caption...................15

✧Using the Sleep Timer Control.........................16

Sound

✧Adjusting the Treble, Bass, and Balance Sound

Controls.............................................................17

✧Setting the TV for Stereo and SAP Programs ..18

✧Using the Incredible Stereo Control.................19

✧Using the Volume Bar Control .........................19

✧Using the Audio Out Jacks (with TV Speaker

On/Off Control) ................................................20

✧Using the TV's Audio/Video Input Jacks ....21-22

TABLE OF CONTENTS

Remote Control Operation

Using the Smart Picture Control ..................23

Using the Smart Sound Control (AVL).........24

Using the Surf and Alternate Channel Buttons .......25

Setting the Remote to Operate

Accessory Devices ..........................................26-27

Setting the TV Remote to Operate Accessory Devices

(Search Method) .....................................................28

Remote Control Direct Entry Code List ............29-30

Using the Remote’s VCR Buttons ..........................31

General Information

Tips if Something Isn’t Working ................32

Glossary of TV Terms..............................................33

Index ........................................................................33

Factory Service Locations..................................34-35

Warranty...................................................................36

Getting Started

Warning/Precautions...................................1

Hooking Up Your TV.................................1

How to Use the “INSTALL” Controls ..................2-3

Using the Language Control......................................2

Setting the TV to Auto Program Channels................2

Setting the TV for a Cable or Antenna Signal...........2

Using the Adding and Deleting Channels .................3

Setting the Channel Name Control............................3

How to use the Smart Clock control .........................3

Basic TV and Remote Control Operation .................4

QUICK USE/INSTALLATION GUIDE

Infrared Remote Control works your TV set, VCR,

and a variety of wireless remote control Cable

Converters (Satellite Receivers, DVD, etc.).

Standard broadcast (VHF/UHF) or Cable TV

(CATV) channel capability.

Stereo Ready TV with built-in audio amplifier and

twin speaker system for receiving TV programs

broadcast in stereo sound.

Closed Captioning allows the viewer to read TV

program dialogue or voice conversations as on-screen

text.

Automatic Programming of Channels for quick

and easy selection of favorite stations available in

your area.

On-Screen Features (in either English, French, or

Spanish) show helpful messages for setting of TV

controls.

Audio/Video Jackpanel for direct connections with

VCRs (or other video accessories) providing quality

TV picture and sound playback.

On Timer automatically turns the TV ON at a preset

time, and channel.

Sleep-Timer automatically turns the TV OFF at pre-

set times.

SmartLock feature allows you to block the viewing

of certain channel or external audio/video connec-

tions were you might not want your children viewing

inappropriate material.

Smart Picture allows you to set the picture color,

tint, contrast, etc. for various types of programming

such as Sports, Movies, Multi Media (Gaming), or

Weak Signals with the push of one button.

Smart Sound controls the sudden volume changes

that occur when changing programs or when a com-

mercial break comes on. It eliminates the peaks and

valleys in the TV’s sound with one pleasant listening

level.

Use the simple Set-Up Guide (supplied with

your TV information packet) for details on:

• Cable/Antenna

Hook-ups

• Auto-Programming

of Channels

• Channel Editing

• Automatic Clock Setting (Smart Clock)

• Basic TV and Remote Control Operation

• On-Screen Menu Use

SET-UP AND QUICK USE GUIDE

-U

P AND

UICK

UIDE

rt.Very smart.

TABLE OF CONTENTS

Getting Started

Warning/Precautions..................................1

Hooking Up Your TV................................1

How to Use the First Time Set-Up Control ..............2

Basic TV and Remote Control Operation.................3

How to Use the On-Screen Menu Controls...............4

• Fordetails on product registration, warranty,

and service refer to the other literature included

with your TV information packet.

Please retain all these materials and keep them

handy for future reference.

75V UHF/VHF

ANT/CABLE

REAR SURROUND

EXT. SPEAKERS

VCR/AUX IN

VIDEO AUDIO

VIDEO

OUT

VAR AUDIO OUT

SUR AUDIO OUT

75V UHF/VHF

ANT/CABLE

REAR SURROUND

EXT. SPEAKERS

VCR/AUX IN

VIDEO AUDIO

VIDEO

OUT

VAR AUDIO OUT

SUR AUDIO OUT

combination (outdoor

or indoor) antenna

receives normal broadcast

channels 2-13 (VHF) and

14-69 (UHF). Your con-

nection to such an antenna

is easy since there is only

one antenna plug (75Ω-

ohm) on the back of your

TV - and that’s where the

antenna goes.

ANTENNA

OUTDOOR/INDOOR

Remember,

be sure to set the

TV for the type sig-

nal you've connect-

ed (see "SETUP"

on page 2 of this

Guide.)

To order any

optional accessory

contact your dealer

or call the toll-free

accessory ordering

number (1-800-292-

6066):

SMART

HELP

If your antenna has a

round cable (75 ohm) on the

end, then you're ready to con-

nect it to the TV.

If your antenna has flat twin-

lead wire (300 ohm), you first

need to attach the antenna wires

to the screws on a 300 to 75

ohm adapter.

Push the round end of the

adapter (or antenna) onto the

ANTENNAplug on the rear of

the TV. If the round end of the

antenna wire is threaded, screw

it down tight.

STOP

300 to 75Ω

Adapter

(483521827003)

Twin Lead

Wire

Back of TV

BEGIN

WARNING: TO PREVENTFIRE OR SHOCK

HAZARD DO NOT EXPOSE THIS UNITTO

RAIN OR EXCESSIVE MOISTURE.

Note: For homes with separate UHF and VHF anten-

nas you will need an optional combiner to connect to

the TV.

UHF

300

-30

75V UHF/VHF

ANT/CABLE

REAR SURROUND

EXT. SPEAKERS

VCR/AUX IN

VIDEOAUDIO

VIDEO

OUT

VAR AUDIO OUT

SUR AUDIO OUT

U/VCombiner

75-300 Ohm Adapter

Round Cable

75ΩOhm

Combination VHF/UHF Antenna

(Outdoor or Indoor)

Back of TV

Projection

Television and

Remote Control

NOTE: This owner's manual is used with sev-

eral different television models. Not all fea-

tures (and drawings) discussed in this manual

will necessarily match those found with your

television system. This is normal and does not

require you contacting your dealer or request-

ing service.

FEATURES

Your new television and its packing contain

materials that can be recycled and reused.

Specialized companies can recycle your

product to increase the amount of reusable

materials and minimize the amounts which

need to be properly disposed.

Your product also uses batteries which

should not be thrown away when depleted,

but should be handed in and disposed of as

small chemical waste.

Please find out about the local regulations

on how to dispose of your old television,

batteries, and packing materials whenever

you replace existing equipment.

END-OF-LIFE DISPOSAL

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

BRIGHTNESS

COLOR

PICTURE

SHARPNESS

TINT

COLOR TEMP

PICTURE

BRIGHTNESS

COLOR

PICTURE

SHARPNESS

TINT

COLOR TEMP

PICTURE

BRIGHTNESS

COLOR

PICTURE

SHARPNESS

TINT

COLOR TEMP

PICTURE

BRIGHTNESS

COLOR

PICTURE

SHARPNESS

TINT

COLOR TEMP

PICTURE

BRIGHTNESS

COLOR

PICTURE

SHARPNESS

TINT

COLOR TEMP

PICTURE

SOUND

FEATURES

INSTALL

BRIGHTNESS

COLOR

PICTURE

SHARPNESS

TINT

COLOR TEMP

BRIGHTNESS

COLOR

PICTURE

SHARPNESS

TINT

COLOR TEMP

WARM

NORMAL

COOL

o adjust your TV picture con-

trols, select a channel and follow

the steps shown below:

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR RIGHT

©© button and the menu will shift

to the right to display an adjustment

bar in front of the BRIGHTNESS

control.

Use the CURSOR LEFT §§

or RIGHT ©© buttons to adjust

the BRIGHTNESS level of the pic-

ture.

After adjusting the BRIGHT-

NESS control, press the CURSOR

DOWN ■ button to select another

Picture adjustment; COLOR, PIC-

TURE, SHARPNESS, TINT, or

COLOR TEMP. Use the CURSOR

LEFT §§ or CURSOR RIGHT

©© buttons to adjust the selected

control.

HOW TO ADJUST THE TV PICTURE

Remember, when the bar

scale is centered, the control set-

tings are at normal mid-range levels.

BRIGHTNESS Press the ©© or §§

buttons until darkest parts of the picture

are as bright as you prefer.

COLOR Press the ©© or §§ buttons

to add or eliminate color.

PICTURE

Press the ©© or §§ but-

tons until lightest parts of the picture show

good detail.

SHARPNESS

Press the ©© or §§

buttons to improve detail in the picture.

TINT Press the ©© or §§ buttons to

obtain natural skin tones.

COLOR

TEMP Press the ©© or §§

buttons to select NORMAL, COOL, or

WARM picture preferences. (NORMAL

will keep the whites, white; COOL will

make the whites, bluish; and WARM will

make the whites, reddish.)

SMART HELP

BEGIN

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

12:30 PM

FEATURES

PICTURE

SOUND

FEATURES

INSTALL

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

--:-- AM

our television comes with an

on-screen clock. During normal

operation the clock appears on the

screen when the STATUS/EXIT but-

ton is pressed or if the Timer DIS-

PLAY control is turned ON.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

©© button and the menu will

shift to the left to display the

TIMER controls.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left and highlight the TIME

control.

Press the CURSOR RIGHT

©© button again to highlight the

time indicator area.

Press the NUMBERED buttons

to enter the correct time. (Use the

CURSOR UP © or CURSOR

DOWN ■ buttons to set AM or PM.)

SETTING THE TV’S CLOCK

SMART HELP

Remember, be sure to

press “0” first and then the

hour number for single digit

entries.

The Clock can also be set automat-

ically using the Smart Clock fea-

ture found on page 2 of the Quick

Use Guide.

The television’s clock settings may

be lost when it is unplugged (or AC

power to the set is interrupted.)

BEGIN

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

12:30 PM

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

MULTI

MEDIASTEREORECORD

The TIME (Clock) feature can be

accessed directly by pressing the

CLOCK button on the remote, then

simply follow steps 5 and 6 to com-

plete the task.

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

OFF

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

FEATURES

PICTURE

SOUND

FEATURES

INSTALL

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

ust like an alarm clock you can

set the TV to turn itself on at the

same time everyday.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

©© button and the menu will

shift to the left to display the

TIMER controls.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left, then CURSOR DOWN

■

to highlight the ACTIVATE

timer control.

Press the CURSOR RIGHT

©© button again to highlight the

ACTIVATE timer option. Then,

press the CURSOR UP © or CUR-

SOR DOWN

■

buttons to turn the

timer ON or OFF.

ACTIVATING THE TV’S ON TIMER CONTROL

SMART HELP

Remember, be sure to

set the time you want the

television to turn on using the

START TIME control as described

on page 10.

BEGIN

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

FEATURES

TIMER

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

FEATURES

PICTURE

SOUND

FEATURES

INSTALL

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

sed along with the on timer

feature, you can select a spe-

cific channel that the television will

tune to when the Timer ACTIVATE

control is turned ON.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

©© button and the menu will shift

to the left to display the TIMER

controls.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left, then CURSOR DOWN

■

to highlight the CHANNEL con-

trol.

Press the CURSOR RIGHT

©© button again to highlight the

channel indicator area.

Press the NUMBERED buttons

to enter the desired start up channel.

(Or, use the CHANNEL (+) or (–)

buttons to select the desired channel.)

SELECTING THE TV’S ON TIMER CHANNEL

SMART HELP

Remember, be sure to

turn the Timer ACTIVATE

control ON after selecting the

desired start up channel. (Refer to

page 8 for further details.)

BEGIN

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

FEATURES

TIMER

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

12:00PM

FEATURES

PICTURE

SOUND

FEATURES

INSTALL

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

sed along with the on timer

feature, you can select a spe-

cific time the television will turn on

when the Timer ACTIVATE control

is turned ON.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

©© button and the menu will shift

to the left to display the TIMER

controls.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left, then CURSOR DOWN

■

to highlight the START TIME

control.

Press the CURSOR RIGHT

©© button again to highlight the

time indicator area.

Press the NUMBERED buttons

to enter the desired start up time.

(Use the CURSOR UP © or CUR-

SOR DOWN ■ buttons to set AM or

PM.)

SETTING THE TV’S ON TIMER START TIME

SMART HELP

Remember, be sure to

turn the Timer ACTIVATE

control ON after setting the desired

start up time. (Refer to page 8 for

further details.)

BEGIN

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

FEATURES

TIMER

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

OFF

FEATURES

TIMER

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

FEATURES

PICTURE

SOUND

FEATURES

INSTALL

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

FEATURES

TIMER

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

....

nce the television clock has

been set, you can use your

television as a clock. The Timer

DISPLAY control allows you to per-

manently display the time in the

upper right corner of the screen.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

©© button and the menu will shift

to the left to display the TIMER

controls.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left, then CURSOR DOWN

■

to highlight the DISPLAY control.

Press the CURSOR RIGHT

©© button again to highlight the

DISPLAY control options. Then,

press the CURSOR UP © or CUR-

SOR DOWN

■

buttons to turn the

timer ON or OFF.

SETTING THE TV’S ON TIMER DISPLAY

SMART HELP

Remember, be sure you

have set the television’s

clock with the correct current time.

(Refer to page 7 to set the Clock

Manually or page 2 of the Quick

Use Guide to set the Clock

Automatically using the Smart

Clock feature.)

BEGIN

USING THE SMART LOCK (SETUP CODE) CONTROL

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

xxxx Incorrect

Please re-enter

access code

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

FEATURES

TIMER

SmartLock

CONTRAST +

CLOSED CAP

BLOCK CHANNEL

SETUP CODE

FEATURES

PICTURE

SOUND

FEATURES

INSTALL

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIME

ACTIVATE

CHANNEL

TUNER

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

----

Enter current

access code

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

xxxx Code correct

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

----

Next enter your

new access code

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

xxxx Code changed

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

----

See your manual if

you've forgotten

your access code.

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

----

Please re-confirm

the code

Parents - it isn’t possible for

your child to unblock a chan-

nel without knowing your

access code or changing it to a

new one. If your code

changes, and you didn’t

change it, then you know it’s

been altered by someone else

and block channels have been

viewed.

mart Lock allows parents to

block out, or “censor” any

channels they think children should

not watch. A channel blocked by

the Smart Lock control cannot be

viewed until a correct access code

is used to unlock the channel for

viewing. First let’s set your Smart

Lock access code:

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

©© button and the menu will

shift to the left, then CURSOR

DOWN

■

to highlight the SMART

LOCK control.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left, then CURSOR DOWN

■

to highlight SETUP CODE.

Press the CURSOR RIGHT

©© button. “---- Enter current

access code” will appear within the

menu.

Press 0, 7, 1, 1 on the remote.

“XXXX” shows on the SETUP

CODE display as you press the

NUMBER buttons. “XXXX

Incorrect - Please re-enter your

access code” will appear. Re-enter

the 0, 7, 1, 1 code on the remote.

“XXXX Code Correct” will

appear.

“Next enter your new access

code” shows on the screen. Press

the NUMBER buttons on the

remote to enter a NEW four digit

code. Confirm your new code by

re-entering it again.

“XXXX Code changed” shows on

the screen to let you know the new

code has been set.

Continue to the next page to learn

how to block channels from viewing.

BEGIN

NOTE: The 0,7,1,1 access code shown on this page is the default code or way to

reset the code when the current access code is not known.

USING THE SMART LOCK (BLOCK CHANNEL) CONTROL

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

FEATURES

TIMER

SmartLock

CONTRAST +

CLOSED CAP

BLOCK CHANNEL

SETUP CODE

FEATURES

PICTURE

SOUND

FEATURES

INSTALL

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIME

ACTIVATE

CHANNEL

TUNER

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

----

Enter current

access code

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

xxxx Code correct

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

CHANNEL 22

ALLOWED

Select channel

Please press > to

block viewing

FEATURES

SmartLock

BLOCK CHANNEL

SETUP CODE

CHANNEL 22

BLOCKED

Select channel

Please press < to

allow viewing

CHANNEL 22

Blocked by Smartlock

XXXX

Please enter access code

or select another channel

All channels can be viewed

until the TV is turned off.

CHANNEL 22

Blocked by Smartlock

- - - -

Please enter access code

or select another channel

Note: You can also block out the use of the A/V external inputs on the rear of the TV.

This stops the viewing of VCR, DVD, etc., programs which can be shown through the

A/V Input jacks. Select AV 1, AV 2, or SVID-R, MM1, MM2, MM3, and select block.

fter your personal access code

has been set (see previous

page), you are now ready to select

up to 5 channels or inputs to block

out or censor.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

©© button and the menu will

shift to the left, then CURSOR

DOWN

■

to highlight the SMART

LOCK control.

Press the CURSOR RIGHT

©© button again to shift the dis-

play left, the BLOCK CHANNEL

control will be highlighted.

Press the CURSOR RIGHT

©© button. “---- Enter current

access code” will appear within the

menu.

Enter the correct access code

number. “XXXX” shows on the

SETUP CODE display as you press

the NUMBER buttons. “XXXX

Code correct” will appear.

Press the CHANNEL (+) or

(–) buttons (or NUMBER but-

tons) to select the channel you want

to block.

Press the CURSOR RIGHT

©© button to block viewing of

the channel, or the CURSOR

LEFT §§ button to allow viewing

of the channel.

Repeat steps 5 through 7 for any

other channels you wish to block

from viewing.

BEGIN

UNBLOCKING CHANNELS

Access the blocked channel direct-

ly by using the number buttons on

the remote control.

Enter your four digit access code.

All blocked channels will be view-

able until the TV is turned off. When

the TV is turned back on, the blocked

channels will not be viewable.

Any channel that has been

blocked will be skipped

when the Channel (+) and

(–) buttons are used to scan

all available channels. To

view a blocked channel,

press the number buttons

on the remote to directly

access the channel and

refer to the Unblocking

Channels section below.

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

FEATURES

TIMER

SmartLock

CONTRAST +

CLOSED CAP

OFF

FEATURES

TIMER

SmartLock

CONTRAST +

CLOSED CAP

FEATURES

TIMER

SmartLock

CONTRAST +

CLOSED CAP

FEATURES

PICTURE

SOUND

FEATURES

INSTALL

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

ue many reason such as poor

cable reception, the picture can

sometime appear slightly “speckled”

(noise in the picture). The NR (Noise

Reduction) control can help eliminate

this type of interference and improve

the quality of the picture.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

©© button and the menu will shift

to the left, TIMER will be highlight-

ed.

Press the CURSOR DOWN ■

to highlight the NR control.

Press the CURSOR RIGHT

©© button again to highlight the

NR option area.

Press the CURSOR UP © or

CURSOR DOWN ■ buttons to turn

the NR feature ON or OFF.

TURNING ON THE NOISE REDUCTION (PICTURE) CONTROL

BEGIN

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

FEATURES

TIMER

SmartLock

CONTRAST +

CLOSED CAP

OFF

FEATURES

TIMER

SmartLock

CONTRAST +

CLOSED CAP

FEATURES

TIMER

SmartLock

CONTRAST +

CLOSED CAP

FEATURES

PICTURE

SOUND

FEATURES

INSTALL

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

he Contrast + feature helps to

“sharpen” the picture quality. The

black portions of the picture become

richer in darkness and the whites

become brighter.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

button and the menu will shift to the

left, TIMER will be highlighted.

Press the CURSOR DOWN ■ to

highlight the CONTRAST + control.

button again to highlight the CON-

TRAST + option area.

CURSOR DOWN ■ buttons to

turn the CONTRAST + feature ON or

OFF.

TURNING ON THE CONTRAST + CONTROL

BEGIN

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

FEATURES

CLOSED CAP

CAPTION MODE

TEXT MODE

TXT 1

FEATURES

CLOSED CAP

CAPTION MODE

TEXT MODE

CC1

FEATURES

CLOSED CAP

CAPTION MODE

TEXT MODE

CC OFF

FEATURES

TIMER

SmartLock

CONTRAST +

CLOSED CAP

CAPTION MODE

TEXT MODE

FEATURES

PICTURE

SOUND

FEATURES

INSTALL

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIMER

SmartLock

CONTRAST +

CLOSED CAP

TIME

ACTIVATE

CHANNEL

START TIME

DISPLAY

OFF

TXT 1

TXT 2

TXT 3

TXT 4

OFF

CC 1

CC 2

CC 3

CC 4

CC MUTE

losed Captioning (CC) allows

you to read the voice content of

television programs on the TV

screen. Designed to help the hear-

ing impaired, this feature uses on-

screen “text boxes” to show dia-

logue and conversations while the

TV program is in progress.

Press the MENU button on the

remote to show the on-screen menu.

PICTURE will be highlighted.

Press the CURSOR DOWN ■

button twice to select the FEA-

TURES menu.

Press the CURSOR RIGHT

shift to the left, TIMER will be

highlighted.

Press the CURSOR DOWN

■

to highlight the CLOSED CAP

control.

Press the CURSOR RIGHT

choose either CAPTION MODE or

TEXT MODE.

Press the CURSOR RIGHT

CAPTION MODE or TEXT

MODE options area.

CURSOR DOWN ■ buttons to

select the CLOSED CAPTION

option you want.

CAPTION MODE:CC1, CC2,

CC3,CC4, CC MUTE, or OFF

-dialogue (and descriptions) for the

action on the captioned TV program

shows on-screen.

TEXT MODE: TXT1, TXT2,TXT3,

TXT4, or OFF

-often used for channel guide, sched-

ules, or bulletin board information

for CC programs.

USING THE CLOSED CAPTION CONTROL

BEGIN

JOHN: Why did they move the

meeting up to this week?

MARSHA: I don't know, but they

are pushing to close the deal.

CLOSE CAPTION PROGRAMS ON WXYZ

ALL ITEMS ARE EASTERN STANDARD TIME (EST)

CHECK LOCAL LISTINGS

FOR TIMES IN YOUR AREA

6:00 TOP OF THE MORNING

12:00 NOONDAY NEWS

6:00 WORLD NEWS FOR TODAY

10:00 THE BEST LITTLE CALL-IN SHOW EVER

9:00 PLAYHOUSE MOVIE OF THE WEEK

1:30 AS YOUR LIFE TURNS MY WORLD AROUND

NOTE: Not all TV programs and product commercials are made for broadcast

with Closed Caption (CC) information included. Neither are all Closed Caption

modes (CAPTION 1-4, or TEXT 1-4)) necessarily being used by a broadcast station

during the transmission of a closed caption program. Refer to your area's TV pro-

gram listings for the stations and times of Closed Caption shows.

CAPTION mode

Example Display

TEXT mode Example Display

TV screen will be

blocked from viewing

NOTE: The CC MUTE option

can be used to set the TV to

turn the Closed Caption mode

“ON” whenever the MUTE but-

ton on the remote is pressed.

The CC button

on the remote

can also be

used to enter

the CLOSED

CAPTION

menu options

directly.

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

GOOD BYE

SLEEP 120

SLEEP 105

SLEEP 90

SLEEP 75

SLEEP 60

SLEEP 45

SLEEP 30

SLEEP 15

SLEEP 0

SLEEP 58

SLEEP 8

ave you ever fallen asleep in

front of the TV only to have in

wake you up at two in the morning

with a test pattern screeching in

your ears? Well, your TV can save

you all that trouble by automatical-

ly turning itself off.

Press the SLEEP button on the

remote control and the SLEEP timer

on-screen display will appear in the

lower center of the display.

Press the SLEEP button

repeatedly to pick the amount of

time (15 minutes to 2 hours ahead)

before the TV will turn itself off.

An on-screen count down will

appear during the last minute before

the TV shuts itself off.

USING THE SLEEP TIMER CONTROL

BEGIN

During the last minute of a SLEEP

timer setting, an on-screen count

down will be displayed.

During the last 10 seconds of a

SLEEP timer setting, an on-screen

display will read GOOD BYE.

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

TREBLE

BASS

BALANCE

AVL

STEREO

SOUND

TREBLE

BASS

BALANCE

AVL

STEREO

SOUND

PICTURE

SOUND

FEATURES

INSTALL

TREBLE

BASS

BALANCE

AVL

STEREO

TREBLE

BASS

BALANCE

AVL

STEREO

SOUND

esides the normal volume level

control, your TV also has indi-

vidual sound adjustment controls.

The TREBLE (high frequency),

BASS (low frequency), and Speaker

BALANCE may all be used to

adjust the sound playback of TV

programs.

Press the MENU button on the

remote to show the on-screen

menu. PICTURE will be high-

lighted.

Press the CURSOR DOWN ■

button to select the SOUND

menu.

Press the CURSOR RIGHT

shift to the right to display an

adjustment bar in front of the TRE-

BLE control.

Use the CURSOR LEFT §§

the TREBLE (high frequency)

level of the television’s sound.

After adjusting the TREBLE

control, press the CURSOR

DOWN ■ button to select another

Sound adjustment; BASS or BAL-

ANCE. Use the CURSOR LEFT

buttons to adjust the selected con-

trol.

USING TREBLE, BASS, AND BALANCE SOUND CONTROLS

SMART HELP

Remember, when the

bar scale is centered,

Speaker BALANCE is centered

between the TV’s Left and Right

side speakers.

BEGIN

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

SOUND

TREBLE

BASS

BALANCE

AVL

STEREO

MONO

SOUND

PICTURE

SOUND

FEATURES

INSTALL

TREBLE

BASS

BALANCE

AVL

STEREO

TREBLE

BASS

BALANCE

AVL

STEREO

HOW TO SET THE TV FOR STEREO PROGRAMS

our TV can receive broadcast

stereo TV programs. The TV

has both an amplifier and twin

speakers through which the stereo

sound can be heard.

Press the MENU button on

the remote to show the on-screen

menu. PICTURE will be high-

lighted.

Press the CURSOR DOWN

■ button to select the SOUND

menu.

Press the CURSOR RIGHT

shift to the right to display an

adjustment bar in front of the

TREBLE control.

Press the CURSOR DOWN

■ button to select the STEREO

control.

Use the CURSOR LEFT §§

STEREO or MONO. With

STEREO selected the television

will reproduce any stereo broad-

cast signal it receives.

SAP is an additional part of the

stereo broadcast system. Sent as a

third audio channel SAP can be

heard apart from the current TV

program sound. TV stations are

free to use SAP for any number

of purposes, but many experts

believe it will be used for foreign

language translations of TV

shows (or for weather and news

bulletins.)

If a SAP signal is not present

with a selected program, the SAP

option cannot be selected. Also, if

SAP is selected on a channel

(with SAP) and you select anoth-

er channel, when you return to

the original channel SAP will be

OFF (and you will have to rese-

lect the SAP feature.)

SECOND AUDIO PROGRAM (SAP)

SOUND

BASS

BALANCE

AVL

STEREO

SAP

SOUND

PICTURE

SOUND

FEATURES

INSTALL

TREBLE

BASS

BALANCE

AVL

STEREO

TREBLE

BASS

BALANCE

AVL

STEREO

BEGIN

SMART HELP

This TV will set the

STEREO feature automatically

to the correct Stereo/Mono option from

the broadcast signal it is receiving.

Stereo programs can be set to mono but

as soon as the channel is changed, Auto

Stereo Select will change the STEREO

feature back to its original option.

When using the A/V modes, you will

have to select the STEREO or MONO

option manually.

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

VOLUME

se the Volume Bar control to see

the TV’s volume level settings

on the TV screen. The Volume Bar

will be seen each time the VOLUME

buttons (on the TV or remote) are

pressed.

Press the VOLUME (+) or (–)

buttons on the remote to show the

VOLUME bar display on-screen.

Press the VOLUME (+) or (–) but-

tons again to adjust the television’s

sound level.

USING THE TV VOLUME BAR CONTROL

Try it out.

Press the VOL (+)

and (–) buttons. The

VOLUME BAR

should appear near

the bottom center of

the screen.

SMART

HELP

BEGIN

USING THE INCREDIBLE STEREO FEATURE

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

SPATIAL

INCR. STEREO

he Incredible Stereo feature

adds greater depth and dimen-

sion to both monaural (MONO)

and stereo TV sound. With the con-

trol turned ON the TV's speakers

can add even wider sound separa-

tion to normal broadcasts.

Press the INCREDIBLE

STEREO button on the remote to

turn the Incredible Stereo feature

ON.

When the TV signal is being

received in STEREO, the on-screen

display will read INCR. STEREO.

When the TV signal is being

received in MONO, the on-screen

display will read SPATIAL.

Both will give increased TV sound

performance when watching movies

or musical programs.

BEGIN

When the TV signal is

being received in MONO,

SPATIAL will appear on-

screen when the INCR.

STEREO button is

pressed.

When the TV signal is

being received in

STEREO, INCR.

STEREO will appear on-

screen when the INCR.

STEREO button is pressed.

USING THE TV SPEAKER CONTROL AND AUDIO OUTPUT JACKS

SLEEP

POWER

AV STATUS/EXIT CC TV/VCR-CLOCK

VCR

ACC

VCR INCREDIBLE A/CH

SMART

SOUND

SMART

PICTURE

SURF

VOL CH

MUTE

MULTI

MEDIASTEREORECORD

ANT "A"

AUDIO

R/MONO

IN-2 IN-1 OUT

VIDEO

S-VIDEO

SOUND

BALANCE

AVL

STEREO

SAP

SPEAKERS

OFF

SOUND

PICTURE

SOUND

FEATURES

INSTALL

TREBLE

BASS

BALANCE

AVL

STEREO

TREBLE

BASS

BALANCE

AVL

STEREO

AUX/TV INPUT

PHONO INPUT

JACK PANEL

LOCATED ON REAR

OF TELEVISION

ould you like to hear TV pro-

grams through your audio hi-

fi system? The TV's Audio Output

jacks and TV Speaker On/Off con-

trol work together to offer you this

TV sound option.

Connect the R(ight) and

L(eft) AUDIO OUT jacks on

the TV to the R and L Audio Input

jacks on your amplifier or sound

system. Set the audio system's vol-

ume to normal listening level.

Turn the TV and audio system

ON. You can now adjust the sound

level coming from the audio sys-

tem with the VOLUME (+) or (–)

buttons on the TV or remote.

To hear the TV sound from

only the audio system speakers.

Press the MENU button on the

remote to show the on-screen

menu. PICTURE will be high-

lighted.

Press the CURSOR DOWN ■

button to select the SOUND

menu.

Press the CURSOR RIGHT

shift to the right to display an

adjustment bar in front of the

TREBLE control.

Press the CURSOR DOWN ■

button to select the SPEAKER

control.

DOWN ■ buttons to select turn

the television’s speakers OFF. You

should now only hear TV sound

coming from the audio system

speakers.

AUDIO SYSTEM

AUDIO OUT (RED/WHITE)

SMART HELP

Remember, the audio

system may have to be in

AUX(iliary) mode to play sound

from the TV.

RCA PHONO

PLUG CABLES

BEGIN

JACK PANEL

LOCATED ON THE REAR

OF THE TELEVISION

Page is loading ...

Philips DFU TS3258 User manual

Brand: Philips

Model: DFU TS3258

Category: CRT TVs

Type: User manual

This manual is also suitable for

Download PDF

report

Philips DFU TS3258 User manual

This manual is also suitable for

Philips DFU TS3258 User manual

Related papers

Other documents