Garmin Edge® 800 Owner's manual

EDGE

®

800

owner’s manual

TOUCHSCREEN GPS-ENABLED BIKE COMPUTER

herein, no part of this manual may be reproduced,

copied, transmitted, disseminated, downloaded

or stored in any storage medium, for any purpose

without the express prior written consent of Garmin.

Garmin hereby grants permission to download a

single copy of this manual onto a hard drive or

other electronic storage medium to be viewed and

to print one copy of this manual or of any revision

hereto, provided that such electronic or printed copy

of this manual must contain the complete text of

this copyright notice and provided further that any

unauthorized commercial distribution of this manual

or any revision hereto is strictly prohibited.

Information in this document is subject to change

without notice. Garmin reserves the right to change

or improve its products and to make changes in the

content without obligation to notify any person or

organization of such changes or improvements. Visit

the Garmin Web site (www.garmin.com) for current

updates and supplemental information concerning

the use and operation of this and other Garmin

products.

Garmin

®

, Auto Pause

®

, Auto Lap

®

, Virtual

Partner

®

, Edge

®

, are trademarks of Garmin Ltd. or

its subsidiaries, registered in the USA and other

countries. Garmin Connect

™

, GSC

™

, ANT

™

, and

ANT+

™

are trademarks of Garmin Ltd. or its

subsidiaries. These trademarks may not be used

without the express permission of Garmin.

Windows

®

is a registered trademark of Microsoft

Corporation in the United States and/or other

countries. Mac

®

is a registered trademark of Apple

Computer, Inc. Firstbeat and Analyzed by Firstbeat

are registered or unregistered trademarks of Firstbeat

Technologies Ltd. Other trademarks and trade names

are those of their respective owners.

Edge 800 Owner’s Manual iii



 

Setting Up the Device ...................1

Registering Your Device ...............1

About the Battery ..........................1

Device Overview...........................2

 

Going for a Ride ...........................4

Saving Your Ride Data .................4

Alerts ............................................4

Workouts ......................................5

Using Virtual Partner ....................8

Courses ........................................8

 

Pairing Your ANT+ Sensors ........ 11

Putting on the Heart Rate

Monitor .....................................12

Pairing the Heart Rate Monitor ...12

Installing the GSC 10..................14

Pairing the GSC 10.....................14

Third-Party ANT+ Sensors .........15

ANT+ Sensor Troubleshooting ...17

Heart Rate Zones .......................18

 

Viewing a Ride ............................19

Data Recording...........................20

Data Management ......................21

 

Locations ....................................24

Route Settings ............................26

Purchasing Additional Maps .......27

Map Settings...............................29

 

Customizing Your Pages and Data

Fields .......................................30

Updating Your Bike Prole ..........35

Training Settings ........................35

System Settings..........................38

User Prole Settings ...................41

 

Registering Your Device .............42

About the Edge ...........................42

iv Edge 800 Owner’s Manual

Updating the Software ................42

Contacting Garmin Product

Support ....................................42

Buying Optional Accessories ......43

Caring for Your Device................43

Specications .............................44

About the Battery ........................46

Charging the Edge......................47

Heart Rate Monitor and GSC 10

Batteries ...................................47

Troubleshooting ..........................51

 

Edge 800 Owner’s Manual 1

Introduction







Always consult your physician before

you begin or modify any exercise

program. See the Important Safety

and Product Information guide in the

product box for product warnings and

other important information.



When using your Edge

®

the rst

time, follow the setup instructions

in the Edge 800 Quick Start

Manual.



Help us better support you by

completing our online registration

today.

• Go to http://my.garmin.com.

• Keep the original sales receipt, or a

photocopy, in a safe place.







This product contains a lithium-ion

battery. See the Important Safety and

Product Information guide in the

product box for product warnings and

other important information.

The device is powered by a built-in,

lithium-ion battery that you can charge

using the AC charger or the USB cable

included in the product box (page 47).

: The device will not charge

when outside the temperature range of

32°F–113°F (0°C–45°C).

2 Edge 800 Owner’s Manual

Introduction





Press and hold to turn the

device on and off.

Press to view the status page

and adjust the backlight.





Press to create a new lap.

Press and hold to save your

ride and reset the timer.





Press to start and stop the

timer.



Select to view satellites and

open the GPS settings menu.

Select to open the settings

menu.

When viewing a course, select

to view additional features.

Select to delete a course,

workout, or activity.

Select to close the page

without saving.

Select to save your changes

and close the page.

Select to return to the previous

page.

Select to change pages or

scroll. You can also swipe your

nger across the touchscreen.



Select to narrow your search

by entering part of the name.

Edge 800 Owner’s Manual 3

Introduction





To avoid accidental screen touches,

you can lock the touchscreen.

1. Press .

The status page appears.

2. Select .



1. Press .

The status page appears.

2. Select

➊

to switch bikes.

➊



• At any time, tap the touchscreen to

turn on the backlight.

• Press to turn on the backlight

and to adjust the brightness.

: Alerts and messages also

activate the backlight.

• Change the backlight timeout

(page 46).





1. Press .

The status page appears.

2. Select , , or .



On any data page, touch and hold a

data eld until it is highlighted.

When you lift your nger, you are

prompted to select a new data eld

(page 30).

4 Edge 800 Owner’s Manual

Training





Before you can record history, you

must locate satellite signals or pair

your Edge with an ANT+

™

sensor

(page 11).

1. From the timer page, press 

to start the timer.

History is recorded only while the

timer is running.

2. After completing your ride, press

.



Press and hold  to save

your ride data and reset the timer.



You can use Edge alerts to train toward

specic time, distance, calorie, heart

rate, cadence, and power goals.





1. Select  >  > .

2. Select , ,

or.

3. Turn on the alert.

4. Enter a time, distance, or calorie

amount.

5. Go for a ride.

Each time you reach the alert amount,

the Edge beeps and displays a message.

: To turn on audible tones for

messages, see page 40.

Edge 800 Owner’s Manual 5

Training



If you have an optional heart rate

monitor, GSC

™

10, or third-party

ANT+ power sensor, you can set up

advanced alerts.

1. Select  >  > .

2. Select an option:

• Select  to set

the minimum and maximum

heart rate in beats per minute

(bpm).

: For more information

about heart rate zones and

settings, see page 12.

• Selectto set

the minimum and maximum

cadence in revolutions of the

crank arm per minute (rpm).

• Select to set the

minimum and maximum power

in watts.

3. Go for a ride.

Each time you exceed or drop below

the specied heart rate, cadence, or

power amount, the Edge beeps and

displays a message.

: To turn on audible tones for

messages, see page 40.



You can use the Edge to create

workouts that include targets for each

workout step and for varied distances,

times, and rest laps. You can plan

workouts in advance and store them on

your Edge.

1. Select  >  >

>.

2. Enter a workout name.

3. Select .

4. Select  to specify how the

step will be measured.

6 Edge 800 Owner’s Manual

Training

For example, select  to end

the step after a specic distance.

If you select , you can press

 to end the step during your

workout.

5. If necessary, enter a value in the

eld below .

6. Select  to choose your goal

during the step.

For example, select 

to maintain a consistent heart rate

during the step.

7. If necessary, select a target zone or

enter a custom range.

For example, you can select a heart

rate zone. Each time you exceed

or drop below the specied heart

rate, the Edge beeps and displays a

message.

8. If necessary, select  in the 

 eld.

During a rest lap, the timer

continues to run and data is

recorded.

9. Select to save the step.

10. Select to save the workout.



Before you can repeat a workout step,

you must create a workout with at least

one step.

1. Select .

2. In the  eld, select an

option:

• Select  to repeat a step

one or more times.

For example, you can repeat a

5-mile step ten times.

• Select  to repeat a

step for a specic duration.

Edge 800 Owner’s Manual 7

Training

For example, you can repeat a

5-mile step for 60 minutes or

until your heart rate reaches 160

bpm.

3. In the  eld, select a

step to repeat.

4. Select to save the step.



1. Select  >  >

.

2. Select a workout.

3. Select .

4. Press .

After you begin a workout, the Edge

displays each step of the workout, the

target (if any), and current workout

data. An audible alarm sounds when

you are about to nish a workout step.

A message appears, counting down

the time or distance until a new step

begins.



Press  to end a step early.



Select  >  >

>.





1. Select  >  >

.

2. Select a workout.

3. Select .

4. Select a step.

5. Make any necessary changes, and

select to save the step.

6. Select to save the workout.



1. Select  >  >

.

2. Select a workout.

3. Select > .

8 Edge 800 Owner’s Manual

Training



Your Virtual Partner

®

is a training tool

designed to help you meet your goals.

1. Go for a ride.

2. Scroll to the Virtual Partner page to

see who is leading.

At the top of the page, you can use

+ and - to adjust the speed of the

Virtual Partner during your ride.



Courses allow you to follow a

previously recorded activity. You can

follow a saved course simply because it

is a good route. For example, you can

save a bike friendly commute to work.

You can also follow a saved course,

trying to match or exceed previously

set performance goals. For example,

if the original course was completed

in 30 minutes, you will race against a

Virtual Partner trying to complete the

course in under 30 minutes.





Before you can create a course, you

must have history with GPS track data

saved to the Edge.

1. Select  >  > 

.

2. Select a previous ride on which to

base your course.

Edge 800 Owner’s Manual 9

Training

3. Enter a name for the course, and

select .



You can record a warmup activity

separately on the Edge. Before you

start the course, you must reset the

timer.

1. Select  > .

2. Select a course.

3. Review the course data pages

(optional).

You can also select to edit the

course features. For example, you

can change the color of the course

line on the map.

4. Select .

History is recorded even if you

are not on the course. A message

appears after you nish the course.





You must have a Garmin Connect

account (page 19).

1. Connect the Edge to your computer.

2. Go to www.garminconnect.com,

and nd an activity.

3. Click .

4. Disconnect the Edge, and turn it on.

5. Select  > .

6. Select the course > .

10 Edge 800 Owner’s Manual

Training



You can include a warmup before you

begin your course. Press  to

begin the course, and then warm up as

normal. Stay away from your course

path as you warm up. When you are

ready to begin, head toward your

course. When you are on any part of

the course path, a message appears.

: As soon as you press ,

your Virtual Partner starts the course

and does not wait for you to warm up.

If you stray away from the course,

the Edge displays a message. Use the

course map or course points to nd

your way back to the course.



1. Select  > .

2. Select a course > .

3. Scroll to the Virtual Partner page.

4. At the top of the page, use + and -

to adjust the percentage of time to

complete the course.

For example, to improve your

course time by 20%, enter a course

speed of 120%. You will race

against the Virtual Partner to nish

a 30-minute course in 24 minutes.



Select  >  > 

.



1. Select  > .

2. Select a course.

3. Select > .

Edge 800 Owner’s Manual 11

ANT+ Sensors



The Edge is compatible with the

following ANT+ accessories:

• Heart rate monitor (page 12)

• GSC 10 speed and cadence sensor

(page 14)

• Third-party ANT+ sensors

(page 15)

For information about purchasing

additional accessories, go to

http://buy.garmin.com.





Before you can pair, you must put on

the heart rate monitor or install the

sensor. See the Edge 800 Quick Start

Manual or the accessory package for

instructions.

• Make sure that the ANT+ sensor

is compatible with your Garmin

device.

• Bring the Edge within range (3 m)

of the accessory.

Stay 10 m away from other ANT+

sensors while pairing.

• After you pair the rst time, your

Garmin device automatically

recognizes the ANT+ sensor each

time it is activated. This process

occurs automatically when you

turn on the Garmin device and

only takes a few seconds when

the sensors are activated and

functioning correctly.

• When paired, your Garmin device

only receives data from your

sensor, and you can go near other

sensors.

12 Edge 800 Owner’s Manual

ANT+ Sensors





See the Edge 800 Quick Start

Manual or the accessory package for

instructions.





If you purchased a heart rate monitor

separately, you must pair it with the

Edge in order to view your heart rate

data. Before you can pair, you must put

on the heart rate monitor.

1. Turn on the Edge.

2. Bring the Edge within range (3 m)

of the heart rate monitor.

3. Select  > > 

 > > 

.

4. Select  > .

5. Press .

When the heart rate monitor is

paired, a message appears, and

appears solid on the status page.

6. If necessary, select .

7. If necessary, customize heart rate

data elds (page 30).

After you put on the heart rate monitor,

it is on standby and ready to send data.

: If heart rate data does not appear

or if you have erratic heart rate data,

you may have to tighten the strap

on your chest or warm up for 5–10

minutes (page 17).



The Edge uses your user prole

information from the initial setup to

determine your heart rate zones. For

the most accurate calorie data during

your ride, set your maximum heart rate,

resting heart rate, and heart rate zones.

Edge 800 Owner’s Manual 13

ANT+ Sensors

1. Select  > > 

 > > 

.

2. Enter your maximum heart rate and

resting heart rate.

The zone values update

automatically; however, you can

still edit each value manually.

3. Select  > and select an

option:

• Select  to view and edit the

zones in beats per minute.

• Select  to view and edit

the zones as a percentage of

your maximum heart rate.

• Select  to view and edit

the zones as a percentage of

your resting heart rate.



Many athletes are using heart rate

zones to measure and increase their

cardiovascular strength and improve

their level of tness. A heart rate zone

is a set range of heartbeats per

minute.

The ve commonly accepted heart

rate zones are numbered from 1 to

5 according to increasing intensity.

Generally, heart rate zones are

calculated based on percentages of

your maximum heart rate.



Knowing your heart rate zones can

help you measure and improve your

tness by understanding and applying

these principles:

• Your heart rate is a good measure of

exercise intensity.

• Training in certain heart rate

zones can help you improve

14 Edge 800 Owner’s Manual

ANT+ Sensors

cardiovascular capacity and

strength.

• Knowing your heart rate zones can

prevent you from overtraining and

can decrease your risk of injury.

If you know your maximum heart rate,

you can enter it and allow the Edge to

calculate your heart rate zones based

on the percentages shown in the table

(page 18).

If you do not know your maximum

heart rate, use one of the calculators

available on the Internet. Some gyms

and health centers can provide a test

that measures maximum heart rate.



See the Edge 800 Quick Start

Manual or the accessory package for

instructions.



If you purchased a GSC 10 separately,

you must pair it with the Edge in order

to view your speed and cadence data.

Before you can pair, you must install

the GSC 10.

1. Turn on the Edge.

2. Bring the Edge within range (3 m)

of the GSC 10.

3. Select  > > 

 > .

4. Select a bike.

5. Select  >

 > .

6. Press .

When the GSC 10 is paired, a

message appears, and

appear solid on the status page.

7. Customize optional data elds

(page 30).

Edge 800 Owner’s Manual 15

ANT+ Sensors



Cadence data from the GSC 10 is

always recorded. If there is no GSC 10

paired, GPS data is used to calculate

the speed and distance.

Cadence is your rate of pedaling or

“spinning” measured by the number of

revolutions of the crank arm per minute

(rpm). There are two sensors on the

GSC 10: one for cadence and one for

speed.

For information about cadence alerts,

see page 5.





The non-zero data-averaging setting

is available if you are training with an

optional cadence sensor. The default

setting is to exclude zero values that

occur when you are not pedaling.

To turn the non-zero averaging on

or off, select  >

> 

 > >

>.



For a list of third-party ANT+ sensors

that are compatible with the Edge, go

to www.garmin.com/intosports.



Refer to the manufacturer’s

instructions.

When the power meter is paired, a

message appears, and appears

solid on the status page.



For calibration instructions specic

to your power meter, refer to the

manufacturer’s instructions.

Before you can calibrate your power

meter, it must be properly installed and

actively recording data.

16 Edge 800 Owner’s Manual

ANT+ Sensors

1. Select  > > 

 > .

2. Select a bike.

3. Select  > .

4. Keep your power meter active by

pedaling until a message appears.



You can set seven custom power zones

using Garmin Connect. If you know

your functional threshold power (FTP)

value, you can enter it and allow the

Edge to calculate your power zones

automatically.

1. Select  > > 

 > .

2. Select a bike.

3. Select.

4. Enter your FTP value.

5. Select  > and select an

option:

• Select  to view and edit

the zones in watts.

• Select  to view and edit

the zones as a percentage of

your functional threshold power.





The non-zero data-averaging setting

is available if you are training with

an optional power meter. The default

setting is to exclude zero values that

occur when you are not pedaling.

To turn the non-zero averaging on

or off, select  > > 

 > >

>.

Page is loading ...

Garmin Edge® 800 Owner's manual

This manual is also suitable for

Garmin Edge® 800 Owner's manual

Related papers

Other documents