EDGE
®
800
owner’s manual
TOUCHSCREEN GPS-ENABLED BIKE COMPUTER
© 2010–2013 Garmin Ltd. or its subsidiaries
All rights reserved. Except as expressly provided
herein, no part of this manual may be reproduced,
copied, transmitted, disseminated, downloaded
or stored in any storage medium, for any purpose
without the express prior written consent of Garmin.
Garmin hereby grants permission to download a
single copy of this manual onto a hard drive or
other electronic storage medium to be viewed and
to print one copy of this manual or of any revision
hereto, provided that such electronic or printed copy
of this manual must contain the complete text of
this copyright notice and provided further that any
unauthorized commercial distribution of this manual
or any revision hereto is strictly prohibited.
Information in this document is subject to change
without notice. Garmin reserves the right to change
or improve its products and to make changes in the
content without obligation to notify any person or
organization of such changes or improvements. Visit
the Garmin Web site (www.garmin.com) for current
updates and supplemental information concerning
the use and operation of this and other Garmin
products.
Garmin
®
, Auto Pause
®
, Auto Lap
®
, Virtual
Partner
®
, Edge
®
, are trademarks of Garmin Ltd. or
its subsidiaries, registered in the USA and other
countries. Garmin Connect
™
, GSC
™
, ANT
™
, and
ANT+
™
are trademarks of Garmin Ltd. or its
subsidiaries. These trademarks may not be used
without the express permission of Garmin.
Windows
®
is a registered trademark of Microsoft
Corporation in the United States and/or other
countries. Mac
®
is a registered trademark of Apple
Computer, Inc. Firstbeat and Analyzed by Firstbeat
are registered or unregistered trademarks of Firstbeat
Technologies Ltd. Other trademarks and trade names
are those of their respective owners.
Edge 800 Owner’s Manual iii
Setting Up the Device ...................1
Registering Your Device ...............1
About the Battery ..........................1
Device Overview...........................2
Going for a Ride ...........................4
Saving Your Ride Data .................4
Alerts ............................................4
Workouts ......................................5
Using Virtual Partner ....................8
Courses ........................................8
Pairing Your ANT+ Sensors ........ 11
Putting on the Heart Rate
Monitor .....................................12
Pairing the Heart Rate Monitor ...12
Installing the GSC 10..................14
Pairing the GSC 10.....................14
Third-Party ANT+ Sensors .........15
ANT+ Sensor Troubleshooting ...17
Heart Rate Zones .......................18
Viewing a Ride ............................19
Data Recording...........................20
Data Management ......................21
Locations ....................................24
Route Settings ............................26
Purchasing Additional Maps .......27
Map Settings...............................29
Customizing Your Pages and Data
Fields .......................................30
Updating Your Bike Prole ..........35
Training Settings ........................35
System Settings..........................38
User Prole Settings ...................41
Registering Your Device .............42
About the Edge ...........................42
iv Edge 800 Owner’s Manual
Updating the Software ................42
Contacting Garmin Product
Support ....................................42
Buying Optional Accessories ......43
Caring for Your Device................43
Specications .............................44
About the Battery ........................46
Charging the Edge......................47
Heart Rate Monitor and GSC 10
Batteries ...................................47
Troubleshooting ..........................51
Edge 800 Owner’s Manual 1
Introduction
Always consult your physician before
you begin or modify any exercise
program. See the Important Safety
and Product Information guide in the
product box for product warnings and
other important information.
When using your Edge
®
the rst
time, follow the setup instructions
in the Edge 800 Quick Start
Manual.
Help us better support you by
completing our online registration
today.
• Go to http://my.garmin.com.
• Keep the original sales receipt, or a
photocopy, in a safe place.
This product contains a lithium-ion
battery. See the Important Safety and
Product Information guide in the
product box for product warnings and
other important information.
The device is powered by a built-in,
lithium-ion battery that you can charge
using the AC charger or the USB cable
included in the product box (page 47).
: The device will not charge
when outside the temperature range of
32°F–113°F (0°C–45°C).
2 Edge 800 Owner’s Manual
Introduction
Press and hold to turn the
device on and off.
Press to view the status page
and adjust the backlight.
Press to create a new lap.
Press and hold to save your
ride and reset the timer.
Press to start and stop the
timer.
Select to view satellites and
open the GPS settings menu.
Select to open the settings
menu.
When viewing a course, select
to view additional features.
Select to delete a course,
workout, or activity.
Select to close the page
without saving.
Select to save your changes
and close the page.
Select to return to the previous
page.
Select to change pages or
scroll. You can also swipe your
nger across the touchscreen.
Select to narrow your search
by entering part of the name.
Edge 800 Owner’s Manual 3
Introduction
To avoid accidental screen touches,
you can lock the touchscreen.
1. Press .
The status page appears.
2. Select .
1. Press .
The status page appears.
2. Select
➊
to switch bikes.
➊
• At any time, tap the touchscreen to
turn on the backlight.
• Press to turn on the backlight
and to adjust the brightness.
: Alerts and messages also
activate the backlight.
• Change the backlight timeout
(page 46).
1. Press .
The status page appears.
2. Select , , or .
On any data page, touch and hold a
data eld until it is highlighted.
When you lift your nger, you are
prompted to select a new data eld
(page 30).
4 Edge 800 Owner’s Manual
Training
Before you can record history, you
must locate satellite signals or pair
your Edge with an ANT+
™
sensor
(page 11).
1. From the timer page, press
to start the timer.
History is recorded only while the
timer is running.
2. After completing your ride, press
.
Press and hold to save
your ride data and reset the timer.
You can use Edge alerts to train toward
specic time, distance, calorie, heart
rate, cadence, and power goals.
1. Select > > .
2. Select , ,
or.
3. Turn on the alert.
4. Enter a time, distance, or calorie
amount.
5. Go for a ride.
Each time you reach the alert amount,
the Edge beeps and displays a message.
: To turn on audible tones for
messages, see page 40.
Edge 800 Owner’s Manual 5
Training
If you have an optional heart rate
monitor, GSC
™
10, or third-party
ANT+ power sensor, you can set up
advanced alerts.
1. Select > > .
2. Select an option:
• Select to set
the minimum and maximum
heart rate in beats per minute
(bpm).
: For more information
about heart rate zones and
settings, see page 12.
• Selectto set
the minimum and maximum
cadence in revolutions of the
crank arm per minute (rpm).
• Select to set the
minimum and maximum power
in watts.
3. Go for a ride.
Each time you exceed or drop below
the specied heart rate, cadence, or
power amount, the Edge beeps and
displays a message.
: To turn on audible tones for
messages, see page 40.
You can use the Edge to create
workouts that include targets for each
workout step and for varied distances,
times, and rest laps. You can plan
workouts in advance and store them on
your Edge.
1. Select > >
>.
2. Enter a workout name.
3. Select .
4. Select to specify how the
step will be measured.
6 Edge 800 Owner’s Manual
Training
For example, select to end
the step after a specic distance.
If you select , you can press
to end the step during your
workout.
5. If necessary, enter a value in the
eld below .
6. Select to choose your goal
during the step.
For example, select
to maintain a consistent heart rate
during the step.
7. If necessary, select a target zone or
enter a custom range.
For example, you can select a heart
rate zone. Each time you exceed
or drop below the specied heart
rate, the Edge beeps and displays a
message.
8. If necessary, select in the
eld.
During a rest lap, the timer
continues to run and data is
recorded.
9. Select to save the step.
10. Select to save the workout.
Before you can repeat a workout step,
you must create a workout with at least
one step.
1. Select .
2. In the eld, select an
option:
• Select to repeat a step
one or more times.
For example, you can repeat a
5-mile step ten times.
• Select to repeat a
step for a specic duration.
Edge 800 Owner’s Manual 7
Training
For example, you can repeat a
5-mile step for 60 minutes or
until your heart rate reaches 160
bpm.
3. In the eld, select a
step to repeat.
4. Select to save the step.
1. Select > >
.
2. Select a workout.
3. Select .
4. Press .
After you begin a workout, the Edge
displays each step of the workout, the
target (if any), and current workout
data. An audible alarm sounds when
you are about to nish a workout step.
A message appears, counting down
the time or distance until a new step
begins.
Press to end a step early.
Select > >
>.
1. Select > >
.
2. Select a workout.
3. Select .
4. Select a step.
5. Make any necessary changes, and
select to save the step.
6. Select to save the workout.
1. Select > >
.
2. Select a workout.
3. Select > .
8 Edge 800 Owner’s Manual
Training
Your Virtual Partner
®
is a training tool
designed to help you meet your goals.
1. Go for a ride.
2. Scroll to the Virtual Partner page to
see who is leading.
At the top of the page, you can use
+ and - to adjust the speed of the
Virtual Partner during your ride.
Courses allow you to follow a
previously recorded activity. You can
follow a saved course simply because it
is a good route. For example, you can
save a bike friendly commute to work.
You can also follow a saved course,
trying to match or exceed previously
set performance goals. For example,
if the original course was completed
in 30 minutes, you will race against a
Virtual Partner trying to complete the
course in under 30 minutes.
Before you can create a course, you
must have history with GPS track data
saved to the Edge.
1. Select > >
.
2. Select a previous ride on which to
base your course.
Edge 800 Owner’s Manual 9
Training
3. Enter a name for the course, and
select .
You can record a warmup activity
separately on the Edge. Before you
start the course, you must reset the
timer.
1. Select > .
2. Select a course.
3. Review the course data pages
(optional).
You can also select to edit the
course features. For example, you
can change the color of the course
line on the map.
4. Select .
History is recorded even if you
are not on the course. A message
appears after you nish the course.
You must have a Garmin Connect
account (page 19).
1. Connect the Edge to your computer.
2. Go to www.garminconnect.com,
and nd an activity.
3. Click .
4. Disconnect the Edge, and turn it on.
5. Select > .
6. Select the course > .
10 Edge 800 Owner’s Manual
Training
You can include a warmup before you
begin your course. Press to
begin the course, and then warm up as
normal. Stay away from your course
path as you warm up. When you are
ready to begin, head toward your
course. When you are on any part of
the course path, a message appears.
: As soon as you press ,
your Virtual Partner starts the course
and does not wait for you to warm up.
If you stray away from the course,
the Edge displays a message. Use the
course map or course points to nd
your way back to the course.
1. Select > .
2. Select a course > .
3. Scroll to the Virtual Partner page.
4. At the top of the page, use + and -
to adjust the percentage of time to
complete the course.
For example, to improve your
course time by 20%, enter a course
speed of 120%. You will race
against the Virtual Partner to nish
a 30-minute course in 24 minutes.
Select > >
.
1. Select > .
2. Select a course.
3. Select > .
Edge 800 Owner’s Manual 11
ANT+ Sensors
The Edge is compatible with the
following ANT+ accessories:
• Heart rate monitor (page 12)
• GSC 10 speed and cadence sensor
(page 14)
• Third-party ANT+ sensors
(page 15)
For information about purchasing
additional accessories, go to
http://buy.garmin.com.
Before you can pair, you must put on
the heart rate monitor or install the
sensor. See the Edge 800 Quick Start
Manual or the accessory package for
instructions.
• Make sure that the ANT+ sensor
is compatible with your Garmin
device.
• Bring the Edge within range (3 m)
of the accessory.
Stay 10 m away from other ANT+
sensors while pairing.
• After you pair the rst time, your
Garmin device automatically
recognizes the ANT+ sensor each
time it is activated. This process
occurs automatically when you
turn on the Garmin device and
only takes a few seconds when
the sensors are activated and
functioning correctly.
• When paired, your Garmin device
only receives data from your
sensor, and you can go near other
sensors.
12 Edge 800 Owner’s Manual
ANT+ Sensors
See the Edge 800 Quick Start
Manual or the accessory package for
instructions.
If you purchased a heart rate monitor
separately, you must pair it with the
Edge in order to view your heart rate
data. Before you can pair, you must put
on the heart rate monitor.
1. Turn on the Edge.
2. Bring the Edge within range (3 m)
of the heart rate monitor.
3. Select > >
> >
.
4. Select > .
5. Press .
When the heart rate monitor is
paired, a message appears, and
appears solid on the status page.
6. If necessary, select .
7. If necessary, customize heart rate
data elds (page 30).
After you put on the heart rate monitor,
it is on standby and ready to send data.
: If heart rate data does not appear
or if you have erratic heart rate data,
you may have to tighten the strap
on your chest or warm up for 5–10
minutes (page 17).
The Edge uses your user prole
information from the initial setup to
determine your heart rate zones. For
the most accurate calorie data during
your ride, set your maximum heart rate,
resting heart rate, and heart rate zones.
Edge 800 Owner’s Manual 13
ANT+ Sensors
1. Select > >
> >
.
2. Enter your maximum heart rate and
resting heart rate.
The zone values update
automatically; however, you can
still edit each value manually.
3. Select > and select an
option:
• Select to view and edit the
zones in beats per minute.
• Select to view and edit
the zones as a percentage of
your maximum heart rate.
• Select to view and edit
the zones as a percentage of
your resting heart rate.
Many athletes are using heart rate
zones to measure and increase their
cardiovascular strength and improve
their level of tness. A heart rate zone
is a set range of heartbeats per
minute.
The ve commonly accepted heart
rate zones are numbered from 1 to
5 according to increasing intensity.
Generally, heart rate zones are
calculated based on percentages of
your maximum heart rate.
Knowing your heart rate zones can
help you measure and improve your
tness by understanding and applying
these principles:
• Your heart rate is a good measure of
exercise intensity.
• Training in certain heart rate
zones can help you improve
14 Edge 800 Owner’s Manual
ANT+ Sensors
cardiovascular capacity and
strength.
• Knowing your heart rate zones can
prevent you from overtraining and
can decrease your risk of injury.
If you know your maximum heart rate,
you can enter it and allow the Edge to
calculate your heart rate zones based
on the percentages shown in the table
(page 18).
If you do not know your maximum
heart rate, use one of the calculators
available on the Internet. Some gyms
and health centers can provide a test
that measures maximum heart rate.
See the Edge 800 Quick Start
Manual or the accessory package for
instructions.
If you purchased a GSC 10 separately,
you must pair it with the Edge in order
to view your speed and cadence data.
Before you can pair, you must install
the GSC 10.
1. Turn on the Edge.
2. Bring the Edge within range (3 m)
of the GSC 10.
3. Select > >
> .
4. Select a bike.
5. Select >
> .
6. Press .
When the GSC 10 is paired, a
message appears, and
appear solid on the status page.
7. Customize optional data elds
(page 30).
Edge 800 Owner’s Manual 15
ANT+ Sensors
Cadence data from the GSC 10 is
always recorded. If there is no GSC 10
paired, GPS data is used to calculate
the speed and distance.
Cadence is your rate of pedaling or
“spinning” measured by the number of
revolutions of the crank arm per minute
(rpm). There are two sensors on the
GSC 10: one for cadence and one for
speed.
For information about cadence alerts,
see page 5.
The non-zero data-averaging setting
is available if you are training with an
optional cadence sensor. The default
setting is to exclude zero values that
occur when you are not pedaling.
To turn the non-zero averaging on
or off, select >
>
> >
>.
For a list of third-party ANT+ sensors
that are compatible with the Edge, go
to www.garmin.com/intosports.
Refer to the manufacturer’s
instructions.
When the power meter is paired, a
message appears, and appears
solid on the status page.
For calibration instructions specic
to your power meter, refer to the
manufacturer’s instructions.
Before you can calibrate your power
meter, it must be properly installed and
actively recording data.
16 Edge 800 Owner’s Manual
ANT+ Sensors
1. Select > >
> .
2. Select a bike.
3. Select > .
4. Keep your power meter active by
pedaling until a message appears.
You can set seven custom power zones
using Garmin Connect. If you know
your functional threshold power (FTP)
value, you can enter it and allow the
Edge to calculate your power zones
automatically.
1. Select > >
> .
2. Select a bike.
3. Select.
4. Enter your FTP value.
5. Select > and select an
option:
• Select to view and edit
the zones in watts.
• Select to view and edit
the zones as a percentage of
your functional threshold power.
The non-zero data-averaging setting
is available if you are training with
an optional power meter. The default
setting is to exclude zero values that
occur when you are not pedaling.
To turn the non-zero averaging on
or off, select > >
> >
>.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
Garmin Edge 800 + Topo Karte Owner's manual
- Category
- Navigators
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Garmin Edge 500 Owner's manual
-
Garmin Edge 800 Owner's manual
-
-
Garmin Edge® 200 Owner's manual
-
Garmin Forerunner Forerunner 310XT Owner's manual
-
Garmin Forerunner 410 User manual
-
Garmin Rowerowy czujnik predkosci/rytmu Owner's manual
-
Garmin Forerunner Forerunner 910 XT Owner's manual
-
Garmin Forerunner Forerunner 410 User manual
-
Garmin 910XT User manual
Other documents
-
Graco 800 User manual
-
Outbound GR-C100 User manual
-
Mio Cyclo series User manual
-
Giant Neos Sync Owner's manual
-
Wuhan Guide iGS130 User manual
-
Grandstream GSC3516 User guide
-
Magellan Cyclo 500 series User manual
-
Bontrager Node 2 Owner's manual
-
-
Mavic Wintech Alti User manual
