SFT10 Stapler and SHP10 Pinner
The SENCO SFT10 Fine-Wire Stapler and the SHPIO Headless
Pinner are extremely well balanced, lightweight, and powerful.
SFT10 Applications:
For upholstering, dust covers, cabinet backs, TV/stereo
screening. Felt insulation, roofing felt, double glazing
strips, light trim, and molding applications in on-site and
manufactured housing. Also for automotive vinyl roofs and
interior trim, shoes/leather goods, screen construction,
picture frames, splash guards, crate labels, and toys.
SFT10 Features:
• Drives 3/8” to 1/2” crown staples 1/4” to 5/8” long
• Balanced 2 to 2.2 lb. weight reduces fatigue
• Full variable speed control adjusts from a single shot to
1,600 cycles per minute
• Easy bottom loading with one-touch magazine release
• Long nose and streamlined barrel fit in tight places and
provide excellent line-of-sight to the work area
SHP10 Applications:
For molding, decorative trim, glazing strips, and window
beading in on-site and manufactured housing. In furniture
and cabinets: dowel and joint pinning, component holding
during gluing, rattan furniture, mirror and picture frame
assembly, blind pinning, drawer assembly, and toys.
SHP10 Features:
• High load capacity (200 pins)
• Balanced 2.4 lb. weight reduces fatigue
• Easy bottom loading with one-touch magazine release
• Drives the smallest to the largest headless pins for a
no-mar finish
• Long nose and streamlined barrel fit in tight places and
provide excellent line-of-sight to the work area
SFT10 Stapler and SHP10 Pinner
CZ
5
/8
1
/2
3
/4
B
C
1
/4
5
/16
3
/8
7
/16
1
/2
1
/4
5
/16
3
/8
1
/2
5
/8
For additional information on how SENCO fastening systems will save you time, reduce costs, and increase quality, call your nearest Authorized SENCO
Dealer or Distributor listed in the Yellow Pages under “Staples, “ or call our toll-free Action Line: 1-800-543-4596.
©
2001 by Senco Products, Inc. Order MK309 Litho in U.S.A. Visit our web site: www.senco.com
SFT10 Tool Specifications:
Tool Weight: 2 lbs. (0.9 kg) to 2.2 lbs. (1 kg)
Height: 6-1/8” (155 mm)
Length: 8-5/8” (218 mm)
Width: 1-5/8” (41 mm)
Lip Length: 1” (25 mm)
Staple Capacity: 180
Operating Pressure: 75-100 p.s.i.g. (5.2-6.9 bar)
Hose Fitting: 1/4” NTP
SFT10 Fastener Specifications:
Width: .030
Thickness: .0215
Gauge: 22
The SFT10-B (480003 and 480006 Automatic) will drive these
1/2" (13 mm) crown staples:
Lengths
Inches 1/4 5/16” 3/8” 1/2”
Millimeters 6 8 1 0 13
Part No. B04 B05 B06 B08
The SFT1O-C (480001 and 480004 Automatic and 480007
long nose) 3/8” (10 mm) crown staples:
Lengths
Inches 1/4” 5/16” 3/8” 7/16” 1/2” 5/8”
Millimeters 6 8 10 11 13 16
Part No. C04 C05 C06 C07 C08 C10
SHP10 Tool Specifications:
Tool Weight: 2.4 lbs. (1 kg)
Height: 513/16 “ (148 mm)
Length: 8V (218 mm)
Width: 1-5/8” (41 mm)
Lip Length: 1/2” (13 mm)
Staple Capacity: 200 headless pins
Maximum Speed: 8 per second (cycles per second)
Operating Pressure: 75-100 p.s.i.g. (5.2-6.9 bar)
Hose Fitting: 114” NTP
SHP10 Fastener Specifications:
Gauge: 23,.025" (.64 mm)
Lengths
Inches 1/2” 5/8” 3 /4”
Millimeters 13 16 19
Part No. CZ08 CZJO C711
Note: A 2” Long Nose
SFT10 is available
and is 7-15/16” in
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Article SKU17515 Assembly Instructions
-
Isotra Isolite Plus Measurement And Assembly Manual
-
Grex P650LXE User guide
-
Grex P635 User guide
-
Isotra System 25 Measurement And Assembly Manual
-
FASCO 11082F Installation guide
-
Craftsman 351182920 Owner's manual
-
Campbell Hausfeld 691165 User manual
-
England's Stove Works 55-TRP10 Owner's manual
-
