2. Home
  3. Do-It-Yourself tools
  4. Power tools
  5. Nail Gun
  6. FASCO
  7. 11082F

FASCO 11082F Installation guide

  • Hello! I am an AI chatbot trained to assist you with the FASCO 11082F Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the model number of the tool?
    What is the height of the tool?
    What are the staple types that the tool can use?
    What is the magazine capacity of the tool?
    What is the working pressure of the tool?
    What is the air consumption per shot?
    What is the maximum speed of the tool?
    What is the weight of the tool?
    What is the length of the staples that the tool can use?
    What is the type of actuation system of the tool?
F1B 7C-16 AUTOMATIC
• Possess the same performances as the Standard Version
• A world-wide patented one trigger system enables the operator
to switch from simple shot to auto re during the operation
• Fewer components in the valve area and its design, which offers
an easy and trouble-free maintenance, make the tool robust and
simple
• One hand control allows the operator to set the desired speed
without leaving the hold on the tool with his hand
• Oversized metal cap and metal insert reduces vibrations and fatigue
while keeping the max. speed (over 1.600 cycles per minute)
STAPLE TYPE
BeA 71, Senco 3G (=C), Atro 7, Bostitch 7
PATENTED
ONE TRIGGER SYSTEM
TOOL TYPE
1B 7C-16 AUT
NOISE VALUE
(EN 12549+A1 : 2008, EN ISO 4871 : 2009)
L
WA,1s
: 87.27 dB (A) - K
WA,1s
, 2.5
L
pA,1s
: 79.10 dB (A) - K
pA,1s
, 2.5
TOOL CHARACTERISTICS
Height Width Length Weight
167 mm 42 mm 218 mm 1070 g
6.57 inch 1.65 inch 8.58 inch 2.36 lbs
Pressure 5 - 7 bar | 70 / 100 psi
Air consumption
per shot
0.17 l in aut.
Performances at 90 psi / 6.2 bar (0.62 MPa)
Lubricant Aerospace Lubricants Tribolube 12
ACTUATION & LOADING
Actuation
System*
5
(Safety : No)
Loading* Bottom Loading
*see instruction manual
VIBRATION VALUE
(UNI ISO/TS 8662-11)
is below the declaration limit set by
UNI EN ISO 12100-1/2
FASTENER DATA
A) Outside Crown 9.00 mm 0.354 inch
B) Inside Crown 7.70 mm 0.303 inch
CxD) Wire 0.60 x 0.75 mm 0.023 x 0.029 inch
L) Length 6 - 16 mm 1/4 - 5/8 inch
Magazine Capacity 180 staples
Staple Type
BeA 71, Senco 3G (=C), Atro 7,
Bostitch 7
APPLICATIONS
■ upholstering ■ dust covers
■ sofas ■ insulation
WORLD-WIDE PATENTED:
ONE TRIGGER SYSTEM
The new automatic design features a rapid valve
controlled uniquely by the trigger itself. If the trigger
is slightly depressed, the tool works in single shot
system. By depressing the trigger fully, the tool
switches over to the automatic ring sequence.
FASCO S.R.L. Italy
Via B. Buozzi 2
I - 40057 Cadriano di Granarolo (BO)
Tel. +39 051 / 60 181 | Fax +39 051 / 766 325
[email protected] | www.fasco-tools.com
Version 10/16 EN
Changes and errors excepted. All rights reserved.
Agrade Fasteners
Daw Trading Pty Ltd
5-7 Mason Drive, Braeside,
VIC 3195 , AUSTRALIA
Tel. +61-(03) 9588 2178 | Fax +61-(03) 95882176
[email protected]
www.agradefasteners.com.au
/