A9 Palm Nailer - A10 Auto Hammer
A9 Applications:
For bridging, framing, decking, fencing, rafter bracing, joist
hangers, pole barn wood to concrete applications in on-site
and manufactured housing. Also industrial applications;
furniture frames, crates, pallets, and underwater applica-
tions.
Features:
• Drives bulk nails, from 5d to 70d
• Balanced 2.46 lb. weight reduces fatigue
• Operates from 30 to 125 psig
• Drives nails into concrete, cinder blocks, and other
hard materials
• Eliminates bent nails
• Depth-of-drive control for precise nail placement
A10 Applications:
For dowel pins, leg glides, formica self-edging, t-molding,
and upholstery tack strips in furniture and cabinet applica-
tions. Also industrial applications; aluminum window
molding, vibrating cores from sand castings, and on-site
finish molding.
Features:
• Delivers a single to over 1,000 blows per minute
• Easily adjusts from the slightest tap to heavy impact
blows
• Balanced 2.19 lb. weight reduces fatigue
• Interchangeable plastic, steel and aluminum tips for a
variety of applications
• Automatically hammers when in contact with work
surfacerplate and hardened safety-resist granular abrasion
The A9 Palm Nailer and A10 Automatic Hammer are ultra-light, easy to operate, and can be used
anywhere your hand will reach
A9 Palm Nailer
A10 Automatic Hammer
For additional information on how SENCO fastening systems will save you time, reduce costs, and increase quality, call your nearest Authorized SENCO
Dealer or Distributor listed in the Yellow Pages under “Staples, “ or call our toll-free Action Line: 1-800-543-4596.
©
2001 by Senco Products, Inc. Order MK329 Litho in U.S.A. Visit our web site: www.senco.com
/
