eSenLite EE101WLS Operating instructions

Category
Motion detectors
Type
Operating instructions

This manual is also suitable for

eSenLite EE101WLS is an add-on socket to most existing light bulbs and offers new possibilities such as:

  • Significant energy savings: Utility cost savings of up to 98% while extending the lifespan of the existing light bulb by up to 10 times.

  • Automatic illumination: Default "SMART" setting provides security illumination throughout the night in dark environments without any motion.

  • Motion activated brightness: When motion is detected in dark environments, the light automatically turns to max brightness. During daylight, the light stays off.

  • Dusk to dawn illumination: Featured with photocell sensors, the light is able to automatically turn on at dusk and turn off at dawn.

eSenLite EE101WLS is an add-on socket to most existing light bulbs and offers new possibilities such as:

  • Significant energy savings: Utility cost savings of up to 98% while extending the lifespan of the existing light bulb by up to 10 times.

  • Automatic illumination: Default "SMART" setting provides security illumination throughout the night in dark environments without any motion.

  • Motion activated brightness: When motion is detected in dark environments, the light automatically turns to max brightness. During daylight, the light stays off.

  • Dusk to dawn illumination: Featured with photocell sensors, the light is able to automatically turn on at dusk and turn off at dawn.

Utility Cost Savings
Of Up To 98%
Worldwide Patents Pending
A smart, simple add-on socket to
most existing light bulbs. Attach a
standard E26 or E27 bulb into the
eSenLite socket, and customize a
preferred light profile to enjoy
dynamic lighting and cost-saving
benefits.
®
Invisible Motion Activated Retrofit Light Bulb Socket
Smart Illumination for Indoor & Outdoor Use
Built with exclusive eSenlite Technology :
- Effectively extends the lifespan of an existing light bulb up to 10 times
- Utility cost savings of up to 98%
- Provides security illumination throughout the night
- Flexible setup with two selectable lighting profiles
“Auto On & OFF” or “SMART/Moonlight – Max Bright”
LED,CFL,
Incandescent Bulbs
Application
2-3/8 inches(60mm)
2-1/2 inches(62mm)
1 inches(24mm)
Specifications (model:EE101WLS)
Operating power: 90-230VAC/50/60Hz
Operating power load: 60W (max)
Built on LED light load: 1W/80LM
Radar HRF: 5.8GHz, ISM band
Detecting angle: 360D wide coverage (adjustable)
Standby power consumption: -0.5W
Photo cell (Lux): 20 lit-up/50 turn-off
Delay timing: 5sec/30sec/1min/3min
Operating level: IP20
Mounting method: Ceiling or Wall; Vertical or Horizontal
Operating temp: 5F to 158F (-15C to +70C)
-Operating method:
SMART (default) or AUTO
Two Years Limited Warranty
EESGI guarantees this product to be free from defects in material & workmanship for (2) year.
This warranty does not apply to damage from misuse or incorrect installation/ connection;
This warranty does not cover accessories, bulbs, batteries, accidents, alterations, unauthorized
use or repair, neglect, misuse, abuse, damages or defects resulting from normal wear and tear
(including chips, fading scratches, abrasions or discoloration due to usage or sun exposure), or
failure to follow instructions for care and maintenance, fire, flood, and Acts of God;
This warranty does not include liability for incidental or consequential damages.
EESGI is not responsible for any damages in excess of the retail purchase price of the product
under any circumstances. The consumer is responsible for the installation of, removal of, and
reinstallation of the product.
Customer Support Services
Achieving 100% customer satisfaction is our goal. If you have any questions, please contact
with us for troubleshooting service. We are more than happy to help.
www.eleding.com
EE101WLS V10102018 us
Tel: (877)579-3889
Work Hours: Mon – Fri, 10AM – 5PM PST
TIME:S1,S2 SENS:S3,S4 LED switch:S5
1
0
(1)Time setting
S1 S2
0 0
3min
1 0
1min
0 1
30s
1 1
5s
Time setting
1
0
1
0
S3 S4
0 0
6.6ft/2m
1 0
13.1ft/4m
0 1
19.7ft/6m
1 1
26.3ft/8m
Detection range
(2)Detection range setting
1
0
AUTO
SMART
S5
1
0
Mode
(3)LED switch setting
Feature and Function:
- Built-in Doppler/Microwave SMART sensor: penetrate physical barriers, overcome temperature
changes, no motion sensing delay
- Innovative lighting no motion sensing delay modes with extremely low-low power consumption:
SMART- moonlight mode (fixed 1W / 80 Lumen) or traditional Auto-on mode ( Make your own
choice! )
- Featured with photocell sensors for true Dusk to Dawn illumination all night long
- Easy-DIY: keep your existing stylish light fixture with added-on user-friendly lighting profiles and
SMART saving feature
<1W
A
Dark Enviroment When Motion Been
Detected: Automatically Turn to Max
Brightness
B
Daylight Enviroment: OFF
C
“SMART” Location
,
Dark Enviroment
Without Motion: Moonlight Illunination
(Saving Mode )
Default setting
Simply attach to a
standard E26/E27 bulb
Smart Illumination for Indoor & Outdoor Use
Installs into existing light socket or light fixture
housing for utility saving & safety enhancement
  • Page 1 1
  • Page 2 2

eSenLite EE101WLS Operating instructions

Category
Motion detectors
Type
Operating instructions
This manual is also suitable for

eSenLite EE101WLS is an add-on socket to most existing light bulbs and offers new possibilities such as:

  • Significant energy savings: Utility cost savings of up to 98% while extending the lifespan of the existing light bulb by up to 10 times.

  • Automatic illumination: Default "SMART" setting provides security illumination throughout the night in dark environments without any motion.

  • Motion activated brightness: When motion is detected in dark environments, the light automatically turns to max brightness. During daylight, the light stays off.

  • Dusk to dawn illumination: Featured with photocell sensors, the light is able to automatically turn on at dusk and turn off at dawn.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI