American Electro Devices KD4204E User guide

Hello! I am an AI chatbot trained to assist you with the American Electro Devices KD4204E User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

DVR Basic/Default Configurations

Connect a USB mouse to your DVR, and navigate to right end to navigate Setup menu (Hammer

and wrench icon)

 ID: admin

 PW: 1111

 Video out resolution: 1024 x 768 (to adjust to Full HD 1080p resolution (1920x1080), go

to Setup – Device – Display)

 Time clock: Automatic time sync every hour. (network/internet connection required)

 HDD installation: Once you connect a new HDD (SATA cable enclosed) and turn on the

DVR, it will ask you to format the HDD. By clicking ‘Format’, the DVR starts recording.

(Western Digital Purple preferred, up to 6TB/each, some models can install multiple

HDDs)

 Network access software: PC software enclosed (CD), for Android and I-Phone, search

and install an app (MVIEWERPRO by DVRDOMAIN, search by ‘dvrdomain’ will be easier

and faster)

 Port Forwarding: Port forwarding should be done to access your DVR over internet. The

DVR needs 5920 (Command port, TCP), 5921 (Stream port, TCP), and 80 (Web server,

TCP). Please consult with your network advisor to set up a port forwarding!

 DDNS service is available. Setup – Device – Network – DDNS. Select on ‘dvrdomain.com’

then click on ‘Get Domain Name’. Write down and keep the name and use this name as

your (IP) address info. (port forwarding should still be done)