Svat CLEARVU1 User manual

Category
Security cameras
Type
User manual
INSTRUCTION MANUAL
COMPLETE SYSTEM
Web Ready DVR System
w/ Integrated 7" LCD and 4 Outdoor Night Vision CCD Cameras
SVAT ELECTRONICS
now you can see
Model#
CLEARVU1
www.svat.com
SVAT ELECTRONICS
now you can see
CLEARVU1 www.svat.com
PRODUCT WARRANTY & REGISTRATION
Please visit our website at www.svat.com to
apply for your products warranty registration.
The warranty registration form is located under the support tab on the SVAT website.
We take quality very seriously. This is why all of our products come with a one year
warranty from the original purchase date against defects in workmanship and materials.
If you have warranty or support issues please contact us using any of the following methods:
SVAT Electronics USA SVAT Electronics Canada Phone: 866.946.7828
2315 Whirlpool St., Unit 333 4080 Montrose Road Fax: 888.771.1701
NIagara Falls, New York Niagara Falls, ON Email: [email protected]
USA 14305 Canada L2H 1J9 Website: www.svat.com
Warranty Terms
1. SVAT products are guaranteed for a period of one year from the date of purchase against defects in
workmanship and materials. This warranty is limited to the repair, replacement or refund of the purchase price
at SVTAT’s option.
2. When service is required, the warranty is validated by the submission of a fully completed warranty card.
3. This warranty becomes void if the product shows evidence of having been misused, mishandled or tampered
with contrary to the applicable instruction manual.
4. Routine cleaning, normal cosmetic and mechanical wear and tear are not covered under the terms of
this warranty.
5. The warranty expressly provided for herein is the sole warranty provided in connection with the product itself
and no other warranty, expressed or implied is provided. SVAT assumes no responsibilities for any other
claimsnotspecicallymentionedinthiswarranty.
6. This warranty does not cover the shipping cost, insurance or any other incidental charges.
7. You MUST call SVAT before sending any product back for repair. You will be given a Return Authorization
number. When returning the product for warranty service, please pack it carefully in the original box with all
supplied accessories, and enclose your original receipt or copy, and a brief explanation of the problem
(include RA #).
8. This warranty is valid only in Canada and the U.S.A.
9. This warranty card cannot be re-issued.
Graphic Symbol Explanation
Thelightningashwitharrowheadsymbol,withinanequilateraltriangle,isintendedto alert the
user to the presence of insinuated “dangerous voltage” within the product’s enclosure that may be
ofsufcientmagnitudetoconstituteariskofelectricshocktopersons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating maintenance (servicing) instructions in the literature accompanying the
appliance.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK, DO NOT OPEN
SVAT ELECTRONICS
now you can see
CLEARVU1 www.svat.com
TABLE OF CONTENTS
WHAT IS INCLUDED ..................................................................................................1
DVR, CAMERA & REMOTE FUNCTIONS ..................................................................3-4
SECTION 2: INSTALLATION ......................................................................................5-7
2-1: CAMERA INSTALLATION .................................................................................... 5
2-2: EXTERNAL TV/MONITOR INSTALLATION ......................................................... 6
2-3: MOUSE INSTALLATION ...................................................................................... 6
2-4: POWERING ON ................................................................................................... 7
SECTION 3: OPERATION ...........................................................................................8-15
3-1: DISPLAY CONFIGURATION ............................................................................... 8
3-2: MOUSE CONTROL ............................................................................................. 9
3-3: SCREEN SWITCH ............................................................................................... 9
3-4: PIP VIEW ............................................................................................................. 9
3-5: ZOOM VIEW ........................................................................................................ 10
3-6: VIEW CAMERAS IN SEQUENCE ....................................................................... 10
3-7: OPEN SETUP MENU .......................................................................................... 11
3-8: RECORD .............................................................................................................. 11
3-9: PLAYBACK .......................................................................................................... 12
SECTION 4: SETUP ....................................................................................................16-26
4-1: DVR LOG-IN ........................................................................................................ 16
4-2: DISPLAY SETUP ................................................................................................. 17
4-3: RECORD SETUP ................................................................................................. 17
4-4: CONFIGURATION ............................................................................................... 19
4-5: EXTERNAL DEVICE ............................................................................................ 22
4-6: BACKUP .............................................................................................................. 25
4-7: LANGUAGE ......................................................................................................... 26
4-8: FACTORY DEFAULT ........................................................................................... 26
SECTION 5: USB BACKUP PLAYER .........................................................................27-30
5-1: BACKUP STATUS ................................................................................................ 27
5-2: BACKUP PLAYER SOFTWARE INSTALLATION ................................................ 27
5-3: BACKUP PLAYER SOFTWARE INTERFACE ..................................................... 29
SECTION 6: NETWORK INSTALLATION & SETUP ...................................................31-61
6-1: NETWORK INSTALLATION & SETUP ................................................................ 31
6-2: ROUTER PORT FORWARDING GUIDE ............................................................. 33
6-3: CLIENT SOFTWARE ........................................................................................... 40
6-4: DDNS SETUP & OPERATION ............................................................................. 49
6-5: REMOTE LIVE VIEW VIA INTERNET EXPLORER ............................................. 56
SECTION 7: ADVANCED DEVICE INSTALLATION....................................................61-63
APPENDIX: SYSTEM CONFIGURATION ...................................................................64
APPENDIX 2: RECORD TIME TABLE ........................................................................64
SPECIFICATIONS .......................................................................................................65-67
WARRANTY INFORMATION ......................................................................................67
SVAT ELECTRONICS
now you can see
WHAT IS INCLUDED
1 DVR
(160GB HDD)
4 Outdoor Night
Vision Cameras
PS/2 Mouse Remote
•4CameraMounts
•SoftwareCD
•10ftRJ-45EthernetCable
•4x60ftVideo/PowerCables
•6RCAtoBNCConnectors
•1PowerAdpaterforDVR
•4powerAdaptersforCameras
•QuickStartGuide
•MountingHardware
•1YearWarranty
•InstructionManual
•4WindowWarningStickers
•Online/TollFreeTechSupport
CLEARVU1 1
CAUTION
• Foryoursafety,unplugthepowerbeforemovingtheDVR,installing,orreplacingany
parts or hard drive.
• MakesureallthepowercableandwiresareproperlysetupbeforeusingtheDVR.
Contact your distributor immediately if there is any defect.
• Toavoidashortcircuit,don’tleaveanyunnecessarypartsinsidetheDVR.
• Pleaseavoiddramaticchangesoftheenvironment,suchasdust,temperature,and
humidity. Keep the DVR in a temperature ranging from 41ºF ~ 104ºF
• KeeptheDVRinawell-ventilatedplaceandawayfromanyheat-generatingobjects.
• DonotblocktheDVR’sfanandvent.
• Donotexposethisunittothedirectsunlight.
• Ifyouarenotsureoftheinstallationandsetup,pleaseconsultaqualiedinstaller.
SVAT ELECTRONICS
now you can see
CLEARVU1 2
DVR & Camera
1. 7” LCD Screen ............................. Watch your footage directly on the DVR.
2. Infrared Remote Sensor .............. Receives the signal from the remote control.
3. Screen On/Off Button .................. Turns LCD Monitor On / Off.
4. LED Indicators ............................. LEDs light up when the LCD, Power or HDD
are in use.
5. Device Port .................................. UpgradermwarethroughaPCUSB
connection (optional).
6. USB Port...................................... ConnectaUSBashdriveorUSBHDDfor
backup purposes.
7. USB Mouse Port .......................... Connect a USB mouse for easier control of DVR.
8. RS-232C Port .............................. Allows you to control the unit with a PC.
9. RS485 Port .................................. Allows you to connect a pan/tilt/zoom (PTZ) camera
and control it with the DVR.
10. Alarm Input/Output ...................... 4 Alarm input sensors and 1 relay output.
11. Ethernet Port ............................... For connection to your local area network
and Internet.
12. BNC Video Inputs ........................ Connects the cameras to the DVR.
13. BNC Video Output ....................... For connection to your TV/monitor.
14. SPOT Video Output ..................... Additional connection to your TV/monitor, only
displays video when motion recording is activated.
15. PS/2 Mouse Port ......................... Allows you to control the unit with a PS/2 mouse.
16. Power Input ................................. DC power input (12V).
17. Sun Shield ................................... Helps prevent glare from bright lights.
18. Infrared (IR) LEDs ....................... Allows the camera to see in the dark up to 15ft away.
19. CDS Sensor................................. Turns on the infrared LEDs when it gets dark.
20. Camera Housing.......................... Made of anodized aluminum to prevent rust.
21. Camera Mount ............................. Allows the camera to be desk or wall mountable.
22. Connection to Extension Wire ..... Converts to RCA.
SVAT ELECTRONICS
now you can see
CLEARVU1 3
Remote Control
1. Menu................... Enters onscreen menu.
2. Number Keys ...... Switchestoaspeciccamera;passwordentering.
3. SEQ .................... Automatically displays full screen or split screen in sequence.
4. PIP ...................... Enters picture-in-picture mode.
5. ENTER ............... Conrmsselectionduringsetup.
6. +/- ...................... Adjustsmenuvaluesduringsystemsetup.
7. STEP .................. Plays frame by frame.
8. REW ................... Entersrewindmode.Pressagaintoadjusttherewindspeed.
9. FF ....................... Entersfastforwardmode.Pressagaintoadjustthefast
forward speed.
10. PLAY ................... Enters playback mode.
11. PAUSE ................ Pauses playback.
12. SEARCH ............. Opens the search window in playback.
13. Arrows ................ Navigates the menu options during setup.
14. P/T ...................... Enters Pan/Tilt/Zoom (PTZ) mode.
15. ZOOM ................. Zooms in on the picture. Use the arrow buttons to move to the area
you want enlarged.
16. ESC .................... Exitstothepreviousmenu;exitsthemainmenu.
SVAT ELECTRONICS
now you can see
CLEARVU1 4
SECTION 2: INSTALLATION
2-1: CAMERA INSTALLATION
Things To Consider Before You Install Your Cameras
• Camera(s)shouldbeinstalledbetween8and13feetabovetheareatobemonitored.
• Ensuretherearenoobstructionsinthecamera’sview,tomaximizeviewingarea.
• Ensurethatthesunshadeispositionedtoavoidglareandpositioncamerasawayfrom
direct sunlight.
• Decidewhetherthecamerawillbewall-mountedorsitonadesk/tabletop.Ifwall
mounting,usethemountinghardwareinthepackage.Thecameracanbeadjustedfor
either mounting scenario by rotating the camera to the required position.
• Eachcameracomeswith60feetofextensionwire.Pleasemakesurethatyoumount
the cameras no more than 60 feet from the DVR.
• Werecommendusingasurgeprotectedpowerbarand/oranUninterruptiblePower
Supply (UPS) to power the DVR and camera system.
Mounting
1. Screw each mounting bracket into each camera’s mounting hole, turning it clockwise.
2. Mount each camera in the desired location no more than 60 feet from the DVR
unless you have purchased additional wiring. You may wall mount or desk mount
these cameras.
3.Adjustcamerastothedesiredviewingangles.
Wiring The Cameras
Follow these instructions for the installation of each camera
1. Plug the 4pin din female connection
on the camera into the 4 pin din male
connection on the 60 foot extension wire.
2. Plug the camera’s power supply into the
powerjacklocatedonthe60ftextensionwire.
3. Plug the camera’s power adapter into an
AC outlet.
4. Attach the BNC to RCA connectors to
the camera inputs and the monitor
outputs on the back of the DVR.
5. Connect the extension wire’s male RCA
plug to CAMERA IN port for channels 1~4.
SVAT ELECTRONICS
now you can see
CLEARVU1 5
1 2 3
4 5
2-2: EXTERNAL TV/MONITOR INSTALLATION (OPTIONAL)
1. Connect an RCA male wire (not included) to the VIDEO OUT Monitor port on the DVR.
Plug the other end of the RCA wire to the RCA VIDEO IN port on the TV/monitor.
2. For motion activated viewing (SPOT), connect an RCA male wire (not included) to
the VIDEO OUT SPOT port on the DVR. Plug the other end of the RCA wire to the
RCA VIDEO IN port on the TV/monitor. Note that the video will only be displayed when
MOTION or ALARM recording is triggered.
2-3: MOUSE INSTALLATION
1. For USB mice, plug the mouse into the USB MOUSE port on the DVR.
2. For PS/2 mice, plug the mouse into the PS/2 MOUSE PORT on the back of the DVR.
SVAT ELECTRONICS
now you can see
CLEARVU1 6
2-4: POWERING ON
1. Insert the power supply wire into the rear DC 12V Port on the DVR.
2. Insert the power cord into the power supply.
3. Plug the power cord into a power outlet. We recommend using a surge protected power bar
and/or UPS backup (to turn the DVR on and off, use the power switch on your UPS or
power bar).
4. The DVR will power on and you will see a boot screen. After the DVR initializes you should
see a 4 camera QUAD view, and recording will begin immediately.
SVAT ELECTRONICS
now you can see
CLEARVU1 7
POWER SUPPLY
POWER CORD
DC 12V PORT
1. We strongly recommend that you change the following settings as soon as you
power on the DVR ( see section 4-4-5 for detailed instructions):
(A) Set up the time/date.
(B) Go to the HDD management and FORMAT HDD. This will clear the video you
recorded after power on and avoid any time/date discrepancies.
2. DO NOT change the date and time after the recording starts. It may corrupt the
DVR’s data archive and cause playback errors. If it is necessary to change date and
time after the recording starts, please repeat step 1 to avoid errors.
SECTION 3: OPERATION
3-1: DISPLAY CONFIGURATION
1. Date & Time - Shows the current system time or the recorded time in playback.
2. Record mode - Shows the current recording mode (motion, continuous, scheduled or
alarm record).
3. Camera title - Shows the camera’s title on the displayed channel.
4. Split mode - Allows you to view either one camera at a time or all four in a quad
view mode.
5. Network status - Displays the network connection status.
6. HDD full status - Icon turns red when the hard disk drive (HDD) is full.
7. HDD record percentage - Shows the HDD space that has been used for recording.
8. Record status - Shows the recording status: RED means that the DVR is recording
(motion,scheduledoralarm);WHITEmeansthattheDVRisnotrecording.
9. Menu Functions -
MENU: Enter setup menu
PIP: Picture In Picture
ZOOM: Zoom in (200%)
SEQUENCE: Automatically cycles through each camera in sequence
SEARCH: Opens the playback search window
PLAY: Quick playback mode
SVAT ELECTRONICS
now you can see
CLEARVU1 8
3-2: MOUSE CONTROL
1. Left button-Conrmsallselectionswhenclickingicons.Italsoincreasesthesetupvalue
in the Menu mode.
2. Right button - Decreases the setup value on in the Menu mode.
3. Mouse wheel-IncreasesanddecreasesthevalueswhileinMENUmode,andadjusts
the playback speed. It also allows you to zoom in and zoom out in the PTZ camera
control mode.
3-3: SCREEN SWITCH
1. Left click on the number icon to switch to the corresponding channel for its full screen view.
2. Left click the Quad icon to switch to Quad view.
3-4: PIP VIEW
1. In full screen mode, left click “PIP” to enter Picture-in-Picture mode.
2. Left click “PIP” again to cancel.
SVAT ELECTRONICS
now you can see
CLEARVU1 9
3-5: ZOOM VIEW
1. This icon allows you to zoom in on the selected camera channel. Left click the ZOOM icon
to enlarge the picture up to 200%. You can then move the enlargement area by moving
the mouse.
2. Left click the ZOOM icon again to cancel.
3-6: VIEW CAMERAS IN SEQUENCE
Click the SEQ icon to enter the Sequential Switching mode and then click the SEQ icon again
to cancel.
• Thecamerasequenceorderis,A>B>C>D…A>B…
• Thesequencetimeisfullyadjustableinthesystemsetupmenu.Pleasesee[SYSTEM
MENU]►[CONFIGURATION]►[INTERVALSETUP]fordetailsandadjustments.
SVAT ELECTRONICS
now you can see
CLEARVU1 10
3-7: OPEN SETUP MENU
• Movethemousecursortothebottomofthescreentoactivatethesystemmenu.
3-8: RECORD
• Recording(RED):TheRecording(RED)iconindicatesthattheDVRisinscheduledrecord,
motion record or alarm record.
• Stoprecord(WHITE):Thewhiteiconisdisplayedwhentherecordscheduleissetto“not
record” at this time.
• Recordmodeicons:
Motion record: The DVR records when motion is detected.
Continuous record: The DVR records continuously.
• Ifthepowerisinterruptedunexpectedly,theDVRwillautomaticallyresumeitsrecording
schedule after the power is restored.
For record mode setup, please refer to Section 4-3: RECORD SETUP.
SVAT ELECTRONICS
now you can see
CLEARVU1 11
Record Percentage
Entire HDD storage percentage
Hard Drive Space Used
This represents the percentage of hard drive space used for recording data.
3-9: PLAYBACK
SVAT ELECTRONICS
now you can see
CLEARVU1 12
Under the following circumstances, the system stops recording:
1. When no video inputs are connected.
2. When no motion is detected while the record mode is set to MOTION.
3. When the record schedule is set to “Not Record”.
4. Installing a new HDD without formatting it or setting it to factory defaults.
5. When the Overwrite function is OFF and the HDD is full.
6.Whenupdatingrmware.
7. When in the HDD management screen of the system menu.
3-9-1: PLAY & STOP
1. Left click the play icon to start playback. This starts from the last playback time.
2. Left click the “EXIT” icon to stop playback.
3-9-2: SEARCH MODE
3. Left click the SEARCH icon to open the search dialog window. There are 3 modes for
search: PERCENT, TIME/DATE and EVENT.
PERCENT SEARCH - Allows you to search by specifying a recording percentage.
TIME/DATE SEARCH - Allows search by specifying a time and date
EVENT SEARCH - Allows you to search by the event list.
SVAT ELECTRONICS
now you can see
CLEARVU1 13
SVAT ELECTRONICS
now you can see
CLEARVU1 14
3-9-3: PLAY & STOP
• Usingthemouse,youcanselectrecordingpercentagesofthesearchbartoplay.Click
“PLAY”toconrmandstarttheplayback.
3-9-4: TIME/DATE SEARCH
1. START - Choose the start time and date of the recording.
2. END - Choose the end time and date of the recording.
3. TARGET - Now that your search is narrowed down, input the target time and date to start
theplayback.Selectthetimeanddatebyusingthemousewheeltoadjustthenumbers.
Then click “PLAY” to start playback.
3-9-5: EVENT SEARCH
1. TIME/DATE - shows the event time and date.
2. CHANNEL - shows the channel on which the event occurred
3. EVENT - shows the type of events: Motion detection (MOT), Image Loss (LOS), Alarm
trigger (ALM). The DVR stores up to 1000 events in its EVENT LIST. By using the left button
on the mouse you can select events and also change event pages.
3-9-6: PLAYBACK SPEED ADJUSTMENT
• Whileplayingback,clicktheplaybackiconstoadjusttheplaybackspeed.
▲Speedsuptheplayback▼Slowsdowntheplayback
◄Rewind►Playsinforwarddirection
Thespeedadjustmentrangeis:1/16X~1X,1X~32X
• Themousewheelcanbeusedtoadjusttheplaybackspeedaswell.
3-9-7: ADJUST PLAYBACK SPEED BY IR REMOTE CONTROLLER
Note:Whileplayingback,youcanselectthedirectionkeysoftheremotecontroltoadjust
the speed.
AdjustthespeedbyusingREWkey(High-speedbackwardplayback)orFFkey(High-speed
forwardPlayback).Pressthekeysrepeatedlytoadjustthespeedrate.
AdjustthespeedbyusingtheSLOW-Motionkeys(Slowplaybackinbackwardorinforward
direction).Pressthekeysrepeatedlytoadjustthespeedrate.
Playback frame by frame by using the STEP keys (Step playback in backward or in
forward direction).
SVAT ELECTRONICS
now you can see
CLEARVU1 15
SECTION 4: SETUP
4-1: DVR LOG-IN
4-1-1: LOGGING IN
1. Left click the MENU icon to login to the DVR system menu.
2. Enter the password by left clicking the 0~9 icons to change their values.
3.LeftclickENTERtoconrmandenterthesystemmenu.
Note: The default USER ID is ADMIN. There is no default password. Press the ENTER
key directly to enter the system.
4-1-2: SYSTEM MENU
1. DISPLAY SETUP - This includes the SCREEN SETUP and On Screen Display (OSD)
setup screens.
2. RECORD SETUP - This includes the RECORD CONFIGURATION and SCHEDULE
SETUP screens.
3. CONFIGURATION - This includes HDD MANAGEMENT, TIME/DATE SETUP,
CAMERA SETUP, INTERVAL SETUP, ALARM SETUP, BUZZER SETUP,
PASSWORD SETUP, and SYSTEM INFORMATION screens.
4. EXTERNAL DEVICE - This includes the TCP/IP SETUP, SPOT SETUP screens.
5. BACK-UP - This allows you to backup recordings to a USB Device.
6. FIRMWARE UPGRADE-UsedtoupgradermwarebyusingUSBmemorystick.
7. FACTORY DEFAULT - Reset the DVR to factory defaults.
8. LANGUAGE - Change the OSD language.
SVAT ELECTRONICS
now you can see
CLEARVU1 16
Caution:
It is strongly recommended that you create a password after the initial setup. Please keep a
record of your password. Rebooting the DVR and resetting the factory defaults will not reset
the password to the default. If you forget the password, please contact SVAT for support.
4-2: DISPLAY SETUP
4-2-1: SCREEN SETUP
1. VERTICAL POSITION-Usedtoadjusttheverticalpositionofimage.
2. HORIZONTAL POSITION-Usedtoadjustthehorizontalpositionofimage.
3. BORDER ENABLE - Enables the display of border.
4. BORDER WIDTH-Usedtoadjustthewidthoftheborders.
5. BORDER COLOR-Usedtoadjustthecoloroftheborder
4-2-2: ON SCREEN DISPLAY SETUP (OSD)
1. TOP OSD OFFSET-AdjuststhepositionofthetopOSD.
2. BOTTOM OSD OFFSET-AdjuststhepositionofthebottomOSD.
4-3: RECORD SETUP
1. RECORD SETUP - This sets the recording mode, resolution, picture quality, and
recording frame rate.
2. SCHEDULE SETUP - This programs the recording schedule.
SVAT ELECTRONICS
now you can see
CLEARVU1 17
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Svat CLEARVU1 User manual

Category
Security cameras
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI