Toro Deluxe Seat Kit, 2000 Series Z Master Riding Mower Installation guide

Deluxe Seat Kit, 2000 Series Z Master Riding Mower
Toro
Brand
Toro
Model
Deluxe Seat Kit, 2000 Series Z Master Riding Mower
Type
Installation guide
FormNo.3397-186RevA
DeluxeSeatKit
2000SeriesZMaster
®
RidingMower
ModelNo.132-5972
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Removetheseat.
Seat
1
Spacer
4
Flangenut(5/16inch)
4
2
Cabletie
4
Installtheseat.
3
Nopartsrequired
–
Testthesafety-interlocksystem.
Note:Forperformanceandsafety,2000Seriesmachines
with48inchmowerdecksrequireaweightkit(No.121-7576)
afterthedeluxeseatkitisinstalled.Obtainthecorrectweight
kitfromanAuthorizedServiceDealer.
1
RemovingtheSeat
NoPartsRequired
Procedure
1.Toexposethefrontnuts,movetheseattothefurthest
rearposition.
2.Loosenthefrontnuts(Figure1).
3.Toexposetherearnuts,movetheseattothefurthest
forwardposition.
4.Loosentherearnuts.
5.Slidetheseatandseatplateforwardtoallowthefront
nutstogothroughthekeyholes(Figure1).
6.Removetheseatandbasefromthemachine.
7.Unplugtheharnessconnectorfromtheseatswitch
locatedundertheseat.
g018378
1
2
Figure1
1.Existingseat2.Frontnutswithkeyhole
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3397-186*A
2
InstallingtheSeat
Partsneededforthisprocedure:
1
Seat
4
Spacer
4
Flangenut(5/16inch)
4
Cabletie
Procedure
1.Removethepackingcoversguardingtheseatstuds.
2.Installaspacerontoeachseatstud(Figure2).
3.Securetheseatframetotheseatwith4angenuts
(5/16inch)(Figure2).
4.Torquethenutsto30.5N-m(22.5ft-lb).
4
g030704
Figure2
1.Seat3.Seatframe
2.Spacer
4.Nut
5.Plugtheharnessconnectorintotheseatswitchlocated
undertheseattowardthefront.
6.Carefullylowertheseatdownandensurethatyoudo
notpinchthewireharness.
7.Installthecableties.
8.Installtheseattothemachineframebyaligningthe
frontnutswiththekeyholeintheseatplate.
9.Slidetheseatandseatplaterearwardtolockthefront
nutsintothekeyholeandtherearnutsintotheslots
(Figure1).
10.Torquethenutsto47.5N-m(35ft-lb).
3
TestingtheSafety-Interlock
System
NoPartsRequired
Procedure
CAUTION
Ifthesafety-interlockswitchesaredisconnectedor
damaged,themachinecouldoperateunexpectedly,
causingpersonalinjury.
•Donottamperwiththeinterlockswitches.
•Checktheoperationoftheinterlockswitches
dailyandreplaceanydamagedswitchesbefore
operatingthemachine.
Thesafety-interlocksystemisdesignedtopreventtheengine
fromstartingunless:
•Theparkingbrakeisengaged.
•Theblade-controlswitch(PTO)isdisengaged.
•Themotion-controlleversareintheNEUTRALLOCK
position.
Thesafety-interlocksystemisalsodesignedtostoptheengine
whenthetractioncontrolsaremovedfromtheLOCKED
positionwiththeparkingbrakeengagedorifyourisefrom
theseatwhenthePTOisengaged.
Thehourmeterhassymbolstonotifyyouwhenthe
interlockcomponentisinthecorrectposition.Whenthe
componentisinthecorrectposition,atrianglelightsupin
thecorrespondingsquare.
Testthesafety-interlocksystembeforeyouusethemachine
eachtime.Ifthesafetysystemdoesnotoperateasdescribed
below,haveanAuthorizedServiceDealerrepairthesafety
systemimmediately.
1.1.Sitontheseat,engagetheparkingbrake,andmove
theblade-controlswitch(PTO)totheONposition.
Starttheengine:Theengineshouldnotcrank.
2
2.Sitontheseat,engagetheparkingbrakeandmovethe
blade-controlswitch(PTO)totheOFFposition,and
moveeithermotion-controllever(outoftheNEUTRAL
LOCKposition).
Starttheengine:Theengineshouldnotcrank.Repeat
fortheothermotion-controllever.
3.Sitontheseat,engagetheparkingbrake,movethe
blade-controlswitch(PTO)totheOFFposition,and
movethemotion-controlleverstotheNEUTRALLOCK
position.
Starttheengine,releasetheparkingbrake,engagethe
PTO,andriseupslightlyfromtheseat:Theengine
shouldstop.
4.Sitontheseat,engagetheparkingbrake,movethe
blade-controlswitch(PTO)totheOFFposition,and
movethemotion-controlleverstotheNEUTRALLOCK
position.
Starttheengine,centereithermotion-controllever,and
move(forwardorreverse):Theengineshouldstop.
Repeatfortheothermotion-controllever.
5.Sitontheseat,disengagetheparkingbrake,movethe
blade-controlswitch(PTO)totheOFFposition,and
movethemotion-controlleverstotheNEUTRALLOCK
position.
Starttheengine:Theengineshouldnotcrank.
Operation
PositioningtheSeat
Theseatcanmoveforwardandbackward.Positiontheseat
whereyouhavethebestcontrolofthemachineandaremost
comfortable.
Toadjust,movetheleversidewaystounlocktheseat(Figure
3).
g019754
Figure3
ChangingtheSeatSuspension
Theseatisadjustabletoprovideasmoothandcomfortable
ride.Positiontheseatwhereyouaremostcomfortable.
Toadjusttheseat,turntheknobinfronteitherdirectionto
providethebestcomfort(Figure4).
g019768
1
Figure4
1.Seat-suspensionknob
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Toro Deluxe Seat Kit, 2000 Series Z Master Riding Mower Installation guide

Deluxe Seat Kit, 2000 Series Z Master Riding Mower
Toro
Brand
Toro
Model
Deluxe Seat Kit, 2000 Series Z Master Riding Mower
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents