Ohana Depot PN7005-DG Operating instructions

Type
Operating instructions
Dining Table Assembly Instructions
Dining table frame and glass tops will be shipped in two separate boxes. Please take precaution when
dealing with glass and sharp objects.
Parts Included:
1 - Table Top Frame
2 - Glass Top
4 - Table Leg
16 - Washer & Screw
1 - Allen Wrench
1. Invert table top frame to the upright position with weaved wicker showing on top.
Top side of frame
Dining Table Assembly Instructions ©2015 Ohana Depot, Inc.
2. Align table leg to the corner plate of the table top frame. Place washers and tighten
the screws using the provided Allen wrench.
3. Place glass top into the allotted slot on the wicker frame. Glass should be placed on top
of rubber stoppers in order to prevent damage.
Dining Table Assembly Instructions ©2015 Ohana Depot, Inc.
  • Page 1 1
  • Page 2 2

Ohana Depot PN7005-DG Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI