Oxford Garden Tulle 48″ Round Tables Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the OXFORD GARDEN TULLE 48" ROUND Dining & Bar Table. This document provides a detailed breakdown of the components and step-by-step instructions for assembling both the dining and bar table configurations. I'm ready to answer any questions you have about the assembly process or the table itself.
  • What is included in the components?
    What hardware is included?
    Is this document for both dining and bar table assembly?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 888.892.2670 f. 502.719.8888 oxfordgarden.com
TULLE 48” ROUND DINING & BAR TABLE
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
1
Table Top Assembly
Quantity: 1
Washers
Quantity: 12
A
Ver. 03.24.23
FINISHING ITEMS
Small X-frame
Quantity: 1
23
Wicker Base
Quantity: 1
4
Wicker Base Extender
(Used for Bar Table
assembly only)
Quantity: 1
B
Short Bolts
Quantity: 12
C
Long Bolts
Quantity: 12
NOTE: Hardware pack may contain more hardware than
what is needed to assemble.
NOTE: HPL and Teak Table Tops have the same assembly.
Images may not accurately represent the table top being
assembled.
Medium Grit Sandpaper (For use on Teak table tops only).
Ver. 03.24.23
STEP 5
Attach Weighted Frame to table base using 8 short
bolts and 8 washers .
STEP 4
Place Table Top upside down on a clean surface
and attach Wicker Base sub-assembly to top using
4 washers and 4 short bolts .
STEP 3 (Bar Table ONLY)
Secure Small X-frame and Wicker Base Extender
to the Wicker Base using 4 long bolts .
(Bar Table)
(Bar Table)
(Bar Table) (Dining Table)
(Bar Table) (Dining Table)
(Bar Table) (Dining Table)
(Dining Table)
STEP 2 (Bar Table ONLY)
Thread  long bolts through Small X-frame into
Wicker Base Extender .
INSTRUCTIONS
A
BA
B
STEP 1 (Dining Table ONLY)
Attach Small X-frame to Wicker Base using
4 long bolts . Proceed to STEP 4.
2
2
2
2
3
3
3
2
4
5
B
A
C
STEP 6
Carefully turn the assembled table in an upright
position. Enjoy!
2
3
1
C
C
B A
A
B
A
B
C
C
C
/