Chute
Lower Handle
778 -11829A© 2010 24A-672G
Remove carriage screws and star
knobs from lower handle.
Place upper handle
over lower handle.
Secure upper handle
to lower handle using
carriage screws and
star knobs previously
removed.
Raise A.
blower
direction
lever to
highest
position.
Slide chute B.
attachment
over blower
opening.
Lower blower direction lever C.
to middle position to lock chute.
Upper Handle
Star Knobs
Blower Direction
Lever
B
C
A
1
3
2
4
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Gas Cap
Throttle
Control
Starter Rope
Handle
Choke
Control
Oil Fill
Fill fuel tank with clean, fresh
gasoline. Do not fill above the
base of fuel tank neck.
Move throttle control into
the Fast
position.
Pour the entire contents of
the oil bottle (included in
carton) into the oil fill.
Move the choke control
into the Choke
position.
Grasp starter rope handle
and pull with quick, full-arm stroke.
When engine starts, slowly move choke
control into the Run
position.
778 -11829A© 2010 24A-672G
5
8
6
9
7
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
-
1
-
2
Troy-Bilt 24A672J711 Fast Start Guide
- Type
- Fast Start Guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Troy-Bilt 24A672G011 Fast Start Guide
-
-
-
-
-
-
-
-
Troy-Bilt Squall 179E Operating instructions
-