2. Toro
  3. Guard Kit, TimeCutter Riding Mower

Toro Guard Kit, TimeCutter Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Guard Kit, TimeCutter Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3383-611RevA
GuardKit
TimeCutter
®
RidingMowerwith107cmCuttingUnit
ModelNo.74132
InstallationInstructions
Donotsupplytheseinstructionstothecustomer.
Theseinstructionsareforadealertoinstalladditionalbelt
guardsonunitssoldinFrance.
Safety
SafetyandInstructional
Decals
Safetydecalsandinstructionsareeasily
visibletotheoperatorandarelocatednear
anyareaofpotentialdanger.Replaceany
decalthatisdamagedorlost.
120-1119
1.Firehazard—readtheOperator'sManual.
1
PreparingforInstallation
NoPartsRequired
Procedure
Important:Refertothe
Operator’ s Man ual
.Themanual
containsimportantinformationaboutsafelyoperating
themachine.Ifyoudonotknowthisinformation,you
couldseriouslyinjureyourselforothers.
1.Parkthemachineonalevel,smoothsurfacewith
sufcientspacetoaccessbothsidesofthemowing
deck.
2.Stoptheengine,settheparkingbrake,removethekey,
anddisconnectthespark-plugwire.
3.Removethemowingdeckandslideitoutfromunder
themachine;refertotheOperator’sManual.
2
AssemblingtheDeckBelt
Guard
Partsneededforthisprocedure:
1
Leftdeckguardplate
1Rightdeckguardplate
1Deckguardcover
6
Bolt(M6-1x16)
6
Locknut(M6-1)
Procedure
Assembletheleftandrightdeckguardplatesandthedeck
guardcoverusingtheboltsandlocknutsasshowninFigure1.
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
*3383-611*A
Figure1
1.Rightdeckguardplate
4.Bolt(6)
2.Locknut(6)
5.Deckguardcover
3.Leftdeckguardplate
3
InstallingtheDeckBeltGuard
Partsneededforthisprocedure:
1
Bolt(M6-1x16)
1Washer
1
Locknut(M6-1)
Procedure
1.Loosentheangenutsontheoutsideofeach
suspensionbracketontherearofthedeck(referto
Figure2).
Figure2
1.Bolt,existing3.Nut,existing
2.Washer,existing4.Flangenut,existing
2.Removetheexistingbolt,washer,andnut.
3.Mounttheassembleddeckguardontothedeckusing
thebolt,washer,andnut(refertoFigure3).
Figure3
1.Washer5.Flangenut,existing
2.Nut6.Bolt
3.Deckbeltguard7.Tab
4.Rearslots
4.Tightentheangenutssecurely.
4
AttachingtheDeck
NoPartsRequired
Procedure
1.Slidethedeckbackunderthemachine,mountittothe
machine,andadjustitasdescribedintheOperator’s
Manual.
2.Verifythattheguardisclearofallmovingparts,
wires,hoses,andothercomponentssothatitwillnot
interferewiththesafeoperationofthemachine.
2
/