Legrand 5010AGY Installation guide

5010A Entrance End Fitting

Installation Instructions

The Entrance End Fitting is used to provide an end feed to Access™ 5000 Raceway with 1/2" or 3/4"

conduit. Installation should be as shown with side walls of the Fitting Base and Raceway Base aligned.

Access 5000 Raceway installed at baseboard level should be spaced a minimum of 1/8" above the floor

level. This will facilitate the assembly/disassembly of the End Fitting Cover.

Fitting Base

Raceway Base

Raceway Cover

Fitting Cover

The Wiremold Company

60 Woodlawn Street

West Hartford CT 06133-2500

This manual is also suitable for