Luxpro LP500V2 User manual

Luxpro
Brand
Luxpro
Model
LP500V2
Category
Flashlights
Type
User manual

Luxpro LP500V2 is an advanced small handheld LED flashlight with a sturdy build and a range of lighting modes to suit various situations. It features three brightness levels – High (330 lumens, 3h runtime, 165m beam distance), Medium (120 lumens, 7h 30m runtime, 80m beam distance), and Low (35 lumens, 15h 15m runtime, 20m beam distance) – allowing you to adjust the light intensity as needed. Additionally, it has a hidden strobe mode for signaling purposes.

Luxpro LP500V2 is an advanced small handheld LED flashlight with a sturdy build and a range of lighting modes to suit various situations. It features three brightness levels – High (330 lumens, 3h runtime, 165m beam distance), Medium (120 lumens, 7h 30m runtime, 80m beam distance), and Low (35 lumens, 15h 15m runtime, 20m beam distance) – allowing you to adjust the light intensity as needed. Additionally, it has a hidden strobe mode for signaling purposes.

USER MANUAL
Operation Instructions
Constructed with aircraft-grade aluminum
LPE optics
Patented TackGrip rubber grip
High quality wrist lanyard
Tactical on/o button
IPX4 waterproof rating
Batteries included (3 AAA)
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
Battery Replacement
The LP500V2 has a Limited Lifetime Warranty Against Manufactur-
er’s Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to info@simpleproducts.com
Product Warranty
Advanced Small Handheld
LED Flashlight
LP500V2
3AAA
Batteries
On/O: Press and release the button on the tail cap to turn the
light on and o.
Cycle Modes: Press button on tail cap quickly to cycle through
modes (High/Medium/Ultra-Low). If light remains in a single
mode for longer than 3-5 seconds, the next press of the button
will turn the light o.
Light automatically resets to High mode when turned o.
Hidden Strobe On/O: Press and hold button for 3 seconds to
activate hidden strobe. Flashlight will remain in hidden strobe
mode until it is deactivated by pushing and holding the button
for 3 seconds again.
The LP500V2 uses 3 AAA batteries.
To replace the batteries, turn the tail cap counterclockwise to
remove it. Tip the light downward to slide out the battery case
which contains the batteries. Remove the batteries from the case
and install new batteries with the negative side of the battery
against the springs in the battery case. For best results, we
recommend using brand new alkaline batteries that are the same
voltage and brand. Re-insert battery case with the arrow on the
battery case pointing down. Re-attach the tail cap by pressing
down lightly and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing
the batteries from the ashlight and storing it in a dry, protected
place.
Low
High
ANSI/PLATO FL1 STANDARD
35 lm
330 lm
LUMENSMODES
15h 15m
3h
RUN TIME
20m
165m
Medium 120 lm 7h 30m 80m
BEAM
DISTANCE
Strobe 330 lm -- --
  • Page 1 1

Luxpro LP500V2 User manual

Luxpro
Brand
Luxpro
Model
LP500V2
Category
Flashlights
Type
User manual

Luxpro LP500V2 is an advanced small handheld LED flashlight with a sturdy build and a range of lighting modes to suit various situations. It features three brightness levels – High (330 lumens, 3h runtime, 165m beam distance), Medium (120 lumens, 7h 30m runtime, 80m beam distance), and Low (35 lumens, 15h 15m runtime, 20m beam distance) – allowing you to adjust the light intensity as needed. Additionally, it has a hidden strobe mode for signaling purposes.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents