Luxpro LP290V2 User manual

Category
Flashlights
Type
User manual
High-Output Everyday
Pocket Light
LP290V2
USER MANUAL
Operation Instructions
The LP290V2 has a Limited Lifetime Warranty Against Manufacturer’s
Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to [email protected]
Product Warranty
Constructed with aircraft-grade aluminum
LPE Optics
Patented TackGrip molded rubber grip
High quality pocket clip
Tactical on/o button
IPX4 waterproof rating
Batteries included (2 AA)
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
Battery Replacement
High
ANSI/PLATO FL1 STANDARD
280 lm
LUMENSMODES RUN TIME
90m
Low 100 lm 8h 50m
BEAM
DISTANCE
Strobe 280 lm -- --
3h
On/O: Press and release the button on the tail cap to turn the
light on and o.
Cycle Modes: First turn the light on by pressing down the button
on the tail cap completely and releasing. Half-press to cycle
through the modes (High/Low/Strobe). Turning the ashlight on
and o quicky and repeatedly will also cycle the light through the
three modes.
The light will automatically reset to High mode when o for
longer than 2 seconds.
The LP290V2 uses 2 AA batteries.
To replace the batteries, turn the tail cap counterclockwise to
remove it. Tip the light downward to slide out both batteries.
Insert two new batteries (+) side facing down. For best results, we
recommend using brand new alkaline batteries that are the same
voltage and brand. Re-attach the tail cap by pressing down lightly
and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing
the batteries from the ashlight and storing it in a dry, protected
place.
  • Page 1 1

Luxpro LP290V2 User manual

Category
Flashlights
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages