LP395

Luxpro LP395 User manual

  • Hello! I've reviewed the user manual for the Luxpro LP395 Flashlight. It's a glow-in-the-dark flashlight with features like a tactical on/off button and IPX4 waterproof rating. I understand how to operate it, replace its batteries, and activate its glow feature. Feel free to ask me any questions you have about using this device.
  • How do I turn the flashlight on and off?
    How do I activate the glow-in-the-dark feature?
    What type of batteries does the flashlight use?
    How do I replace the batteries?
    What is the beam distance on high mode?
USER MANUAL
Operation Instructions
Constructed with aircraft-grade aluminum
9 LED ashlight
Glow-in-the-dark rubber grip
Matching wrist band
Tactical on/o button
IPX4 waterproof rating
Batteries included (3 AAA)
Features
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
Battery Replacement
The LP395 has a Limited 30-Day Warranty Against Manufacturers
Defects rom time of purchase.
For warranty claims please contact us by calling 801-553-8886 or
sending an email to info@simpleproducts.com
Product Warranty
Glow-In-The-Dark
GELS Flashlight
LP395
3AAA
Batteries
High
ANSI/PLATO FL1 STANDARD
40 lm
LUMENSMODES RUN TIME
15m
BEAM
DISTANCE
10h
On/O: Press and release the button on the tail cap to turn the
light on and o.
Glow-In-The-Dark: Flashlight must be exposed to a bright light
for a few minutes to activate the glowing rubber feature.
Duration of glow varies by color of light and ranges between 2 – 5
minutes.
The LP395 uses 3 AAA batteries.
To replace the batteries, turn the tail cap counterclockwise to
remove it. Tip the light downward to slide out the battery case
which contains the batteries. Remove the batteries from the case
and insert new batteries according to the (+/-) symbols found on
the case. For best results, we recommend using brand new
alkaline batteries that are the same voltage and brand.
Re-insert battery case into the ashlight (+) side rst with the
arrow on the battery case pointing down. Re-attach the tail cap
by pressing down lightly and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing
the batteries from the ashlight and storing it in a dry, protected
place.
/