2. Fisher & Paykel
  3. OM24NDB1
OM24NDB1

Fisher & Paykel OM24NDB1, OM24NDB1 Convection Speed Oven 24 inch, OM24NDBB1, OM24NDBB1 24-Inch Convection Speed Oven User guide

  • Hello! I am an AI chatbot trained to assist you with the Fisher & Paykel OM24NDB1 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the minimum inside height of the cavity?
    What is the minimum inside width of the cavity?
    What is the overall height of the cabinetry (cavity around front frame)?
    What is the overall width of the cabinetry (cavity around front frame)?
    What are the minimum clearance requirements for the rear ventilation air vent?
    What is the overall height of the oven?
    What is the overall width of the oven?
    What is the overall depth of the oven (excluding handle and front metal trim)?
DATA SHEET
Convection Speed Oven
DATE: 04.11.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
DATUM : BOTTOM OF CHASSIS
DATUM : FRONT OF CHASSIS
PROFILE VIEWFRONT VIEW
PLAN VIEW
DATUM : FRONT OF CHASSIS
VENTILATION
POWER OUTLET
LOCATION
Model no:
OM24NDB1, OM24NDBB1
(refer page 2 for metric measurements)
Product Dimensions
inches
a Overall height of oven
18 1/16"
B Overall width of oven
2 1/2"
c Overall depth of oven (excludes handle and front metal trim)
22 1/8"
d Depth of oven frame, control panel and door (excludes handle
and front metal trim)
7/ 8 "
E Depth of chassis (includes terminal block)
21 1/4"
F Height of chassis
17 9/16"
G Width of chassis
21 7/8"
H Height from bottom datum to top of oven door
1 5/8"
I Height of control panel
 15/16"
J Height of metal cap on control panel
1/16"
k Height from bottom datum to centreline of handle
12 /4"
l Width of handle
22 1/4"
m Depth of handle (measured from front of door)
1 5/8"
n Thickness of handle
5/8"
o Distance from bottom datum to bottom of door glass
/16"
p Depth of door (open) (measured from front of door)
12 5/8"
Minimum Clearances
inches
Minimum inside height of cavity
17 /4"
Minimum inside width of cavity
22 1/16"
Minimum inside depth of cavity
22 1/16"
Overall height of cabinetry (cavity around front frame)
18 1/8"
Overall width of cabinetry (cavity around front frame)
2 5/8"
Rear ventilation air vent depth*
2"
Rear ventilation air vent width*
22 1/16"
*A rear ventilation air vent totalling 4.4in is required. The air vent must be
located at the rear of cabinet, it can be positioned at the base, sides, back or
top of the cavity.
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
A
B
d
c
E
F
G
H
I
J
K
L
M
N
o
p
p
2 1/2"
18 1/16"
21 1/4"
DATA SHEET
Convection Speed Oven
DATE: 04.11.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
DATUM : BOTTOM OF CHASSIS
DATUM : FRONT OF CHASSIS
PROFILE VIEWFRONT VIEW
PLAN VIEW
DATUM : FRONT OF CHASSIS
VENTILATION
POWER OUTLET
LOCATION
Model no:
OM24NDB1, OM24NDBB1
(refer page 1 for imperial measurements)
Product Dimensions
mm
a Overall height of oven
458
B Overall width of oven
596
c Overall depth of oven (excludes handle and front metal trim)
562
d Depth of oven frame, control panel and door (excludes handle
and front metal trim)
22
E Depth of chassis (includes terminal block)
540
F Height of chassis
446
G Width of chassis
556
H Height from bottom datum to top of oven door
47
I Height of control panel
100
J Height of metal cap on control panel
20
k Height from bottom datum to centreline of handle
24
l Width of handle
565
m Depth of handle (measured from front of door)
42
n Thickness of handle
16
o Distance from bottom datum to bottom of door glass
5
p Depth of door (open) (measured from front of door)
20
Minimum Clearances
mm
Minimum inside height of cavity
450
Minimum inside width of cavity
560
Minimum inside depth of cavity
560
Overall height of cabinetry (cavity around front frame)
460
Overall width of cabinetry (cavity around front frame)
600
Rear ventilation air vent depth*
50
Rear ventilation air vent width*
560
*A rear ventilation air vent totalling 280cm is required. The air vent must be
located at the rear of cabinet, it can be positioned at the base, sides, back or
top of the cavity.
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
A
B
d
c
E
F
G
H
I
J
K
L
M
N
o
p
p
596
458
540
/