2. Fisher and Paykel
  3. OB60SC8DEPX2
OB60SC8DEPX2

Fisher and Paykel OB60SC8DEPX2, OB60SC5CEX2, OB60SC7CEX2, OB60SC7CEX2 Oven, 60cm, 7 Function, OB60SC8DEPX2 8 Function 60cm Selfcleaning Oven User guide

  • Hello! I've reviewed the datasheet for the Fisher & Paykel ovens models OB60SC7CEX2, OB60SC6CEX2, and OB60SC5CEX2. This document provides detailed dimensional specifications for the ovens and their required installation clearances. I'm here to help if you have any questions about the technical details provided in this document.
  • What is the overall height of the oven?
    What is the depth of the oven chassis (excluding the oven front)?
    What is the minimum inside width of the cavity required for installation?
DATE: 21.02.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
DATA SHEET
600mm Oven
Model no:
OB60SC7CEX2, OB60SC6CEX2, OB60SC5CEX2
Product Dimensions
mm
a Overall height* of oven
598
B Overall width of oven
597
c Depth of oven front and control panel** (excludes handle and
dials)
20
d Depth of oven chassis (does not include oven front)
545
E Height from bottom datum to top of stainless cap
523
F Height from bottom datum to bottom of stainless cap
485
G Height from bottom datum to top of door
473
H Height from bottom datum to top of handle
460
I Height from bottom datum to bottom of handle
445
J Height from bottom datum to top of stainless door cap
118
K Height from bottom datum to bottom of door
10
L Height from bottom datum to top of chassis
575
M Height from bottom datum to top of chasis at rear
565
N Depth of door (open) (measured from front of door)**
450
O Overall width of chassis
552
P Width of handle
565
Q Depth of handle (measured from front of door)**
42
* All height measurements included mounted feet
** Measured to front glass surface and excludes 2mm stainless cap
Minimum Clearances
mm
Height of cavity from bottom datum
580
Minimum inside width of cavity
560
Minimum inside depth of cavity from front datum
550
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
DATUM : BOTTOM OF CARCASS
DATUM : FRONT OF CARCASS
DATUM : FRONT OF CARCASS
596
B
P
545
D
J
598
A
Q
N
c
FRONT VIEW
PLAN VIEW
PROFILE VIEW
C
IHG
L
M
D
552
O
N
KFE
/