2. Fisher & Paykel
  3. OM24NDBB1
OM24NDBB1

Fisher & Paykel OM24NDBB1, OM24NDBB1 24-Inch Convection Speed Oven User guide

  • Hello! I've reviewed the datasheet for the Fisher & Paykel Convection Speed Oven models OM24NDB1 and OM24NDBB1, along with the TK480NDB1 trim kit. This document provides precise measurements for the oven, its trim kit, and the required installation space, including crucial ventilation requirements. I'm ready to help if you have questions about the dimensions, clearances, or any other details provided.
  • What is the overall height of the oven and trim?
    What is the minimum inside height of the cavity for proud installation?
    What is the required rear ventilation air vent area?
DATA SHEET
Convection Speed Oven with Trim Kit
DATE: 14.10.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
DATUM :
BOTTOM OF CHASSIS
PLAN VIEW
DATUM : FRONT OF CHASSIS
VENTILATION
PROFILE VIEW
FRONT VIEW
NOT TO SCALE
Model no:
OM24NDB1 with TK480NDB1, OM24NDBB1 with TK480NDB1
(refer page 2 for metric measurements)
Product Dimensions
Inches
a Overall height of oven and trim
18 1/16"
B Overall width of oven
2 1/2"
c Overall depth of oven and trim (excludes handle and front
metal trim)
22 1/4"
D Depth of oven frame and trim surround (excludes handle and
front metal trim)
7/ 8 "
E Depth of oven chassis and trim brackets
21 /8"
F Height of oven chassis and trim brackets
18 /8"
G Width of oven chassis and trim brackets
21 7/8"
H Height from bottom datum to top of oven door
14 7/16"
I Height of control panel
 15/16"
J Height of metal cap on control panel
1/16"
K Height from bottom datum to centreline of handle
1 1/2"
L Width of handle
22 1/4"
M Depth of handle (measured from front of door)
1 5/8"
N Thickness of handle
5/8"
O Distance from bottom datum to top of trim grille
1/16"
P Distance from bottom datum to bottom of door glass
1"
q Depth of door when opened (measured from front of door)
12 5/8"
r Height of trim support brackets
1/16"
Minimum Clearances
Inches
Minimum inside height of cavity (proud installation)
18 1/2"
Minimum inside depth of cavity (proud installation)
22 1/16"
Minimum inside width of cavity
22 1/16"
Overall height of cabinetry (cavity around trim surround)
18 1/8"
Overall width of cabinetry (cavity around trim surround)
2 5/8"
Rear ventilation air vent depth*
2"
Rear ventilation air vent width*
22 1/16"
*A rear ventilation air vent totalling 4.4in is required. The air vent must be
located at the rear of cabinet, it can be positioned at the base, sides, back or
top of the cavity.
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
A
C
D
E
F
G
K
J
H
p
L
M
N
o
q
q
18 1/16"
22 1/4"
B2 1/2"
R
I
21 /8"
POWER OUTLET
LOCATION
DATUM : FRONT OF CHASSIS
TK480NDB1
TRIM KIT
OM24NDB1, OM24NDBB1
MICROWAVE OVEN
DATA SHEET
Convection Speed Oven with Trim Kit
DATE: 14.10.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
DATUM :
BOTTOM OF CHASSIS
DATUM : FRONT OF CHASSIS
PLAN VIEW
DATUM : FRONT OF CHASSIS
VENTILATION
PROFILE VIEW
FRONT VIEW
Model no:
OM24NDB1 with TK480NDB1, OM24NDBB1 with TK480NDB1
(refer page 1 for imperial measurements)
Product Dimensions
mm
a Overall height of oven and trim
478
B Overall width of oven
596
c Overall depth of oven and trim (excludes handle and front
metal trim)
564
D Depth of oven frame and trim surround (excludes handle and
front metal trim)
22
E Depth of oven chassis and trim brackets
542
F Height of oven chassis and trim brackets
466
G Width of oven chassis and trim brackets
556
H Height from bottom datum to top of oven door
67
I Height of control panel
100
J Height of metal cap on control panel
20
K Height from bottom datum to centreline of handle
44
L Width of handle
565
M Depth of handle (measured from front of door)
42
N Thickness of handle
16
O Distance from bottom datum to top of trim grille
20
P Distance from bottom datum to bottom of door glass
25
q Depth of door when opened (measured from front of door)
20
r Height of trim support brackets
20
Minimum Clearances
mm
Minimum inside height of cavity (proud installation)
470
Minimum inside depth of cavity (proud installation)
560
Minimum inside width of cavity
560
Overall height of cabinetry (cavity around trim surround)
460
Overall width of cabinetry (cavity around trim surround)
600
Rear ventilation air vent depth*
50
Rear ventilation air vent width*
560
*A rear ventilation air vent totalling 280cm is required. The air vent must be
located at the rear of cabinet, it can be positioned at the base, sides, back or
top of the cavity.
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
A
C
D
E
F
G
K
J
H
p
L
M
N
o
q
q
478
542
B596
R
I
POWER OUTLET
LOCATION
NOT TO SCALE
TK480NDB1
TRIM KIT
OM24NDB1, OM24NDBB1
MICROWAVE OVEN
/