2. Profoto
  3. Clic Softbox Octa
Clic Softbox Octa

Profoto Clic Softbox Octa User guide

  • Hello! I've reviewed the Clic Softbox Octa User Guide and I'm ready to assist you with any questions you have. This user guide covers the assembly, magnetic mounting, and tilting mechanisms. Also it describes the ability to stack modifiers. Ask me anything about the Clic Softbox Octa!
  • How are Clic light shapers mounted?
    Can the flash be knocked off the mount?
    Can Clic light shapers be stacked?
Clic Softbox Octa
User Guide
Clic Softbox Octa
Familiarize yourself with Clic
What is Clic?
Clic is our most lightweight and portable range of light shaping
tools, specifically designed for the A-series flashes.
The Clic range gives you diverse, easy to use and compact light
shapers for all your needs – on the go.
How does Clic work?
The Clic light shapers are mounted quick and easy due to the
magnetic setup. The mount has been designed using strong
magnets attaching your flash firmly to the light shaper. Note
that there is always a possibility of knocking the flash off when
it's affected by outer impact. When used in crowded areas, with
abrupt or abnormal movements, or repositioning the stand,
please take extra precautions and secure your flash.
And before you begin, get to know your Clic Softbox Octa!
Get started with your new
Clic Softbox Octa
The Clic Softbox Octa is quick and easy to assemble.
Unfold the Clic Softbox Octa by retracting the ring upwards
until it clicks.
The Clic Softbox Octa is just as easy to disassemble when you
are done.
Quickly fold by pressing the unlock section.
When used on a stand, tilt the Clic Softbox Octa by pressing
the trigger and rearrange the softbox according to your
preference. The softbox can be tilted both forwards and
backwards.
The Clic Softbox Octa is made for Profoto A-series flashes.
Attach your A-series flash to the magnetic mount. Make sure
that the flash is correctly inserted and have connection with all
magnets and that the surface is clean.
As the Clic system uses magnetic mounts, it is important that
each connection is mounted correctly.
When mounted, get comfortable with the magnetic set up by
shaking it gently to get a feel of the magnetic strength!
The Clic system allows you to stack several light shapers in
order to create the eect you need.
Just click them on each other!
To mount dierent Clics with the Clic Softbox Octa, place the
additional modifier from the inside of the softbox before
unfolding it. This way the magnetic mount is not compromised
in any way when mounting your flash to the Clic Softbox Octa.
Do not place any accessories between your light and the
Clic Softbox Octa.
For more information and inspiration:
profoto.com
/