1 parallel, 2 USB 2.0 port print server ENPS-2012
Product Description
The ENPS-2012 print server allows you to connect three printers via 2 USB ports and one
Parallel port to the network using one RJ-45 cable at 10Base-T or 100Base-TX Encore
external print servers allow you to place your printers or plotters at convenient locations. It
connects directly to the network allowing to you share and manage your printer from any
computer. No longer do you need to assign a specific computer to control the printer. The
print server acts as a stand alone networking device providing print service to anyone
connected to the network. The print servers support the Simple Network Management
Protocol (SNMP), with remote printer management and indicators. A standard SNMP agent
is permanent on these print servers. Any standard SNMP-based application can be used to
access and manage these print servers. Print server supports a variety of network protocol
suites, including TCP/IP, IPX/SPX, NetBEUI and AppleTalk protocols.
Supports:
Netware: Fully compatible with DHCP, NDS and Bindery
Windows NT/2000: TCP/IP LPR Port Printing, IPX, NetBEUI and TCP/IP
Windows 95/98/ME: Supports Windows Peer-to-Peer Networks, IPP, IPX, NetBEUI and
TCP/IP.
MAC OS: Supports AppleTalk (Ethernet Phase II) with MAC OS version 8.0 or after
UNIX: Supports RFC 1179 standard, IPP, TFTP, RARP, BOOTP and DHCP
Internet (via Internet Printer Connection software)