Barco E-3620 User manual

Installation & User Manual

Nio systems

Supported displays:

E-2620, E-2620 S, E-2621, E-3620, E-3621, E-5620, MDNG-5121

(This page intentionally left blank.)

2 Nio systems

(This page intentionally left blank.)

Nio systems 3

Copyright notice

This document is copyrighted. All rights are reserved. Nor this

document, nor any part of it, may be reproduced or copied in any form

or by any means - graphical, electronic, or mechanical including

photocopying, taping or information storage and retrieval systems -

without written permission of Barco

4 Nio systems

(This page intentionally left blank.)

Table of Contents

Nio systems 5

Table of Contents

Preface........................................................................................ 7

Safety Instructions............................................................................. 11

Explanation of symbols..................................................................... 14

Overview................................................................................... 17

Introduction ....................................................................................... 19

BarcoMed N

IO display controller overview ...................................... 21

Package contents .............................................................................. 23

Parts, controls and connectors.......................................................... 24

Installation................................................................................ 27

Installation precautions..................................................................... 29

Display controller installation ........................................................... 30

BarcoMed PCI Express

®

Controllers............................................ 33

Display installation............................................................................ 35

After unpacking the display....................................................... 35

Power connection....................................................................... 38

Video connection........................................................................ 39

USB connection........................................................................... 40

Cable routing .............................................................................. 40

Attaching the display to an arm stand............................................. 42

Software installation ......................................................................... 44

Installing the B

ARCOMED display controller drivers and software..

44

NioWatch............................................................................................ 49

Settings for optimal display performance throughout the product

lifetime ................................................................................ 50

Avoiding image retention.......................................................... 50

Operation.................................................................................. 53

BarcoMed control panel operation................................................... 55

Table of Contents

6 Nio systems

Accessing the Barco tab............................................................. 55

Advanced Properties .................................................................. 57

Device details ............................................................................. 60

NioWatch operation........................................................................... 61

Display settings .......................................................................... 62

Test patterns............................................................................... 69

Application settings.................................................................... 70

Update NioWatch........................................................................ 72

Display operation .............................................................................. 73

Display operation ....................................................................... 73

Cleaning .................................................................................... 79

Precautions ........................................................................................ 81

Front filter (protective screen).......................................................... 82

Front glass.......................................................................................... 83

LCD panel ........................................................................................... 84

Cabinet............................................................................................... 85

Troubleshooting........................................................................ 87

General tips........................................................................................ 89

Technical Information............................................................... 95

Technical specifications..................................................................... 97

Connector pin assignments............................................................. 110

Glossary............................................................................................ 111

Warranty Statement ...............................................................113

Nio systems 7

Preface

(This page intentionally left blank.)

8 Nio systems

(This page intentionally left blank.)

Preface

Nio systems 9

Notice

Although every attempt has been made to achieve technical accuracy in

this document, we assume no responsibility for errors that may be

found. Our goal is to provide you with the most accurate and usable

documentation possible; if you discover errors, please let us know.

BarcoView software products are the property of BarcoView. They are

distributed under copyright by Barco N.V. or BarcoView, LLC., for use only

under the specific terms of a software license agreement between

Barco N.V. or BarcoView LLC. and the licensee. No other use, duplication,

or disclosure of a BarcoView software product, in any form, is

authorized.

The specifications of BarcoView products are subject to change without

notice.

Trademarks

All trademarks and registered trademarks are property of their

respective owners.

FCC notice (display)

This equipment has been tested and found to comply with the limits of

a Class A digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Canadian notice

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe A est conforme à la norme NMB-

003 du Canada.

Preface

10 Nio systems

Disposal Information

The lamps inside the display contain mercury. Do not throw the display

in the trash. Dispose of it as required by local ordinances or regulations.

Safety Instructions

Nio systems 11

Safety Instructions

General Recommendations

Read the safety and operating instructions before operating the display.

Retain safety and operating instructions for future reference.

Adhere to all warnings on the display and in the operating instructions

manual.

Follow all instructions for operation and use.

Electrical shock

Type of protection (electrical):

Class I equipment

Degree of safety (flammable anesthetic mixture):

Equipment not suitable for use in the presence of a flammable

anesthetic mixture with air or with oxygen or nitrous oxide.

Power connection

• Power requirements: The display must be powered using the 12

VDC power supply that is supplied with the display.

• The 12 VDC power supply must be powered by the AC mains

voltage.

•Power cords:

Power cord with CEE 7 plug: The colors of the mains

lead are colored in accordance with the following

Safety Instructions

12 Nio systems

code: Green-and-yellow: Earth (safety earth), Blue: Neutral,

Brown: Line

Power cord with ANSI 73.11 plug: The wires of the

power cord are colored in accordance with the

following code: Green/yellow: ground, White: neutral,

Black: line (live)

• Do not overload wall outlets and extension cords as this may

result in fire or electric shock.

• Mains lead protection (U.S.: Power cord): Power cords should be

routed so that they are not likely to be walked upon or pinched

by items placed upon or against them, paying particular

attention to cords at plugs and receptacles.

Water and moisture

Never expose the display to rain or moisture.

Never use the display near water - e.g. near a bathtub, washbasin,

swimming pool, kitchen sink, laundry tub or in a wet basement.

Ventilation

Do not cover or block the ventilation openings in the cover of the set.

When installing the display in a cupboard or another closed location,

heed the necessary space between the set and the sides of the

cupboard.

Installation

Place the display on a flat, solid and stable surface that can bear the

weight of at least 3 displays. If you use an unstable cart or stand, the

display may fall, causing serious injury to a child or adult, and serious

damage to the equipment.

More warnings in the Installation chapter.

Safety Instructions

Nio systems 13

Operating precautions: How to avoid image retention

Continuous operation of the display with the same image may result in

some image sticking on the LCD panel. Over 10 hours operation with the

same image content is not recommended.

To decrease the risk of image sticking (image retention):

• Switch on DPMS on display and PC

• Activate a good screen saver

This apparatus conforms to:

CE (LVD 73/23/EEC), IEC 60950-1, UL 60950-1,

CAN/CSA C22.2 No. 60950-1 (c-UL), EN 60950-1 DEMKO,

CCC GB4943-1995

National Scandinavian Deviations for Cl. 1.7.2 :

Finland: "Laite on liitettävä suojamaadoituskoskettimilla varustettuun

pistorasiaan"

Norway: "Apparatet må tilkoples jordet stikkontakt"

Sweden: "Apparaten skall anslutas till jordat uttag"

Explanation of symbols

14 Nio systems

Explanation of symbols

Symbols on the display and / or power supply

On the display or power supply, you may find the following symbols:

Indicates the display is approved according to

the CE regulations

or

Indicates the display is approved according to

the UL regulations

or

Indicates the display is approved according to

the c-UL regulations

Indicates the display is approved according to

the DEMKO regulations

Indicates the display is approved according to

the CCC regulations

Indicates the USB connectors on the display

Indicates this apparatus must not be thrown

in the trash but must be recycled, according

to the European WEEE (Waste Electrical and

Electronic Equipment) directive

Explanation of symbols

Nio systems 15

Symbols used throughout the manual:

Warning Caution

Important notice or

remark

Note

Hint, tip Additional

information

Explanation of symbols

(This page intentionally left blank.)

16 Nio systems

Nio systems 17

Overview

(This page intentionally left blank.)

18 Nio systems

(This page intentionally left blank.)

Introduction

Nio systems 19

Introduction

Thank you for choosing Barco.

Single display or complete system?

This manual describes installation and usage of a complete N

IO system.

A N

IO system is a bundling of one or more displays and one or more

display controllers.

However, if you have purchased the display only instead of a N

IO

system, please refer to the chapters in this manual covering the display,

and disregard the information about the display controller or N

IOWATCH

software.

The displays

The E-2620 (S) is a 19.8-inch grayscale LCD display with a native

resolution of 1600 x 1200.

The E-2621 is a 21.3-inch grayscale LCD display with a native resolution

of 1600 x 1200.

The E-3620 is a 20.8-inch grayscale LCD display with a native resolution

of 2048 x 1536.

The E-3621 is a 21.3-inch grayscale LCD display with a native resolution

of 2048 x 1536.

The E-5620 is a 20.1-inch grayscale LCD display with a native resolution

of 2560 x 2048.

The MDNG-5621 is a 21.3-inch grayscale LCD display with a native

resolution of 2560 x 2048. It is available in a clearbase and bluebase

version.

Their high-brightness, combined with image crispness and excellent

viewing angle, makes them ideal for a multitude of medical

applications and environments.

Introduction

20 Nio systems

Long-term stabilization

The displays contain a Backlight Output Stabilization system (BLOS

©

),

which continuously stabilizes the luminance output of the LCD’s

backlight. This improves the overall optical efficiency and provides long-

term image confidence.

NioWatch

In N

IO systems, the display comes standard with NIOWATCH, a user-

friendly software tool that optimizes the LCD panel for DICOM-compliant

viewing.

Power saving

The displays are equipped with a power saving system. When left idle

for a certain time, the computer connected to the display, will power

down the display.

The power saving system can be switched on or off using the on-screen

menus.

Tilt & swivel base

The versatile tilt & swivel foot allows to use the display for viewing

portrait or landscape image resolutions.

The user can easily change the panel height and viewing angle,

allowing to use the display in the optimal viewing conditions.

Page is loading ...

Barco E-3620 User manual

Barco E-3620 User manual

Related papers

Other documents