AT&T IIM2100M Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the AT&T IIM2100M Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
- 1 -
IIM2100M AT&T Quick Start Guide
Note: Before beginning take your Internet In Motion Yellow information sheet to your local
AT&T dealer and get a DATACONNECT (Unlimited) account setup.
This Quick Start guide details installing a SIM. The modem is preconfigured for your Internet In
Motion® system. For additional modem configuration options, please contact IIM Technical
Support at 866-715-2272 or support@InternetInMotion.net
The IIM2100M-AT&T is equipped with an easy insertion SIM slot.
Figure 1. Slot Cover
Figure 2. Slot Cover Removed.
1. Remove the SIM slot cover.
Simply remove slot cover on the front of the
IIM2100M to reveal the SIM slot.
- 2 -
2. Eject the SIM tray.
Using the tip of a PDA stylus, an unbent paper-
clip, or other slim blunt item press the yellow
button (FIG. 3) of the SIM tray and slide the tray
out of the slot.
3. Insert the SIM into the tray.
Carefully remove the SIM card from the card you got
from AT&T/Cingular.
Place the SIM into the tray and gently press to click it
into place.
Figure 4. Eject SIM tray.
4. Insert the tray with the SIM back into the
IIM2100M-A.
Slide the tray back into the modem and gently
press to click it into place.
FIGURE 5. SIM Tray and SIM Card.
FIGURE 6. Inserting the SIM tray
Figure 3. SIM Tray Eject Button
- 3 -
Note: The first time you power on your IIM2100M with your new SIM, there may be a delay of up to 10
minutes for the initial network connection to occur.
Your IIM2100M is been preconfigured. If a problem should occur please contact IIM Support
at 866 –715-2272 or support@internetinmotion.net
Hardware Installation
Please consult the attached installation instructions.
Your IIM2100M should be mounted in a position that allows easy access for the cables so they are not bent or con-
stricted. The LEDs on the front panel should be visible for ease of operational verification. You should ensure that
there is adequate airflow around the modem but that it is kept free from direct exposure to the elements (sun, rain,
etc.)
IIM Customer Support
Electronics Products Group
222 N. Hicks Place, Palatine, IL 60067
IIM Support Line: 866-715-2272
TEL: 847-934-0580 FAX: 847-991-3328
5. Replace the SIM slot cover.
Replace the cover to prevent dust or other unwanted parti-
cles from entering the IIM2100M-A. Once the cover is
replaced, the installation is complete.
Figure 7. SIM Slot cover replaced.
/