Weba Sport SWIM ERGOMETER Operating instructions

1

SWIM ERGOMETER

Operating Manual

(Rev 3.0)

Weba Sport und Med.- Artikel GmbH

Liesneckgasse 6/1

1210 Vienna

Austria

Tel.: ++43 1 2723550

Fax: ++43 1 27235504

office@webasport.at

www.webasport.at

2

Inhalt

Assembly Instructions .......................................................................... 3

Performance Display Monitor............................................................. 15

Main characteristic ........................................................................... 16

Performance Display monitor menu structure .................................. 17

Monitor .............................................................................................. 17

Workout............................................................................................. 19

Recall ................................................................................................ 20

Memory ........................................................................................... 21

Device ............................................................................................. 21

Properties ....................................................................................... 21

Device Memory capacity ....................................................................... 22

3

Assembly Instructions

Before assembling or using the Swim ergometer, please read the

following instructions carefully. Manual contain important

information for use and maintenance of the equipment as well as

for your personal safety. Keep these instructions in a safe place for

maintenance purposes or for ordering spare parts.

For your safety

•

••

• Swim ergometer should be used only for intended purpose, i.e. for

physical exercise.

•

••

• Any other use of the equipment is prohibited and may be

dangerous. The manufacturer cannot be held liable for damage or

injury caused by improper use of the equipment.

•

••

• Swim ergometer has been designed in accordance to the latest

standards of safety. Any features which may have been a possible

cause of injury have been avoided or made as safe as possible.

•

••

• Incorrect repairs and structural modifications (e.g. removal or

replacement of original parts) may endanger the safety of the user.

•

••

• Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged parts

should be replaced immediately and the equipment taken out of

use until this has been done.

•

••

• In case of enquiry for spare parts, please contact WEBA Sport.

•

••

• If the equipment is in regular use, check all its components

thoroughly every 1-2 months. Pay particular attention to the

tightness of bolts and nuts.

•

••

• Instruct persons using the equipment (in particular children) on

possible sources of danger during exercising.

•

••

• Before beginning your program of exercise, consult your doctor to

ensure that you are fit enough to use the equipment. Base your

program of exercise on the advice given by your doctor. Incorrect

or excessive exercise may damage your health.

•

••

• Our products are subject to a constant innovative quality

assurance. We reserve the right to perform technical modifications.

4

Handling the equipment

•

••

• It is not recommended to use or store the apparatus in a damp

room as this may cause it to rust. Please ensure that no part of the

machine comes in contact with liquids (drinks, perspiration etc.)

This may cause corrosion.

•

••

• The Swim Ergometer is designed for use by adults and children

should not be allowed to play with it. Children at play behave

unpredictably and dangerous situations may occur for which the

manufacturer cannot be held liable. If, in spite of his, children are

allowed to use the equipment, ensure that they are instructed in its

proper use and supervised accordingly.

•

••

• The Ergometer complies fully with DIN EN 957 1/5, class SA. It is

therefore suitable for therapeutic purposes.

•

••

• Please ensure that liquids or perspiration never enter the

machine or the electronics.

•

••

• Do not use corrosive or abrasive materials to clean the equipment.

Ensure that such materials are not allowed to pollute the

environment.

•

••

• The equipment does not require any special maintenance. All

bearings are lubricated (further lubrication is not required).

•

••

• Before use, always check all screws and plug-in connections as

well as respective safety devices fit correctly

5

Instructions for assembly

•

••

• Ensure that you have received all the parts required and that they

are not damaged. If you have any cause for complaining, please

contact WEBA Sport.

•

••

• Before assembling the equipment, study the drawings carefully and

carry out the operations in the order shown by the diagrams. The

correct sequence is given in capital letters.

•

••

• The equipment must be assembled with due care by an adult

person. If in doubt, call for help a second person, if possible

technically talented.

•

••

• Please note that there is always a danger of injury when working

with tills or doing manual work. Therefore please be careful when

assembling this machine.

•

••

• Ensure that your working area is free of possible sources of

danger, for example don’t leave any tools lying around. Always

dispose packaging material in such a way that it may not cause any

danger. There is always a risk of suffocation of children play with

plastic bags.

•

••

• Bolt all the parts together loosely at first, and check that they have

been assembled correctly. Tighten the locknuts by hand until

resistance is felt, then use spanner to finally tighten nuts

completely against resistance (locking device). Then check that

all screws connections have been tightened firmly.

•

••

• Please keep original packaging of this article, so that it may be

used for transport at a later dare, if necessary.

•

••

• For technical reasons, we reserve the right to carry out preliminary

assembly work.

WEBA Sport und Med Artikel GmbH • 1210 Wien • Liesneckgasse 6/1

www.weba-sport.com

6

Einleitung

The SWIM ERGOMETER is a brand new product which

gives recreational and top-athletes the best opportunity to

simulate the motion stereotype of swim sport for test and

training. The complexity of the smooth and gentle motions

increases the muscles strength and flexibility of the upper

body.

It also offers the optimal cardio vascular training. The

unlimited range of resistance is given through air

displacement turbine. This break system allows the using of

the SWIM ERGOMETER independent from age or fitness-

level. The load is regulated by the pulling effort. The working

position is adjustable for all body height.

The SWIM ERGOMETER is quality engineered using the

heavy-duty component. This ergo meter could be

disassembled in two parts for convenient transportation or

storage.

The SWIM ERGOMETER optimal and cost effective

training machine provided with an electronic unit

PERFORMANCE MONITOR (Display Device) for monitoring

time, movement rate, force and power. Performance monitor

take signals from strain gages sensors for accurate

measuring of force and power.

7

Package Includes

Swim Ergometer with Display Device

Battery charger

USB cable

Choose the correct connector

The enclosed connectors correspond to the most commonly used.

The correct connector should fit properly using a little pressure. Do

not use extreme force to set the connector as this could damage

the unit to be charged.

Operation

Plug the power plug into a convenient mains socket. After

connecting the charger with the battery pack the charging indicator

signals that the battery is charging. The charging doesn‘t stop

automatically. Please take a look to the charging table (4) for the

right charging time.

Charging time

Approximately 12h.

Attention

The charger is for indoor use only. The charger should be

disconnected from the mains when not in use. Do not plug in the

charger in case of damaged cabinet or power plug. Never open the

charger.

8

System Mounting

Main parts

9

Step1

Step 2

10

11

Step 3

12

13

Step 4

Step 5

14

15

Performance Display Monitor

The Display Device is designed to be menu driven and self-

explanatory. Via the menu system it’s also possible to adjust all the

parameters, to switch data recording ON/OFF, to choose the desired

display during the work and to transfer the recorded data to a PC for

further analysis in an easy and simple way using the software package.

When the device is connected to a PC, it is possible to do the

software adjustments, to memorize and to follow the complete work on

the Swim Ergo in the REMOTE mode

16

Main characteristic

• Graphic display

• Rechargeable battery with about 15 hours of autonomy

• Navigate the functions using menus

• Display options including graphical or numerical data

• Time, Stroke rate, Power, Force, Pulling length, Speed, /200m,

/500m, Distance

• Choose from a variety of units - Power (W), Force (N), Pulling

length [cm] or Speed [km/h] - to be displayed with bigger fonts in

the middle of the display. Switch between the units during a

workout using UP/DOWN buttons

• Pre-programming the workouts with time, distance, rest time and

pace

• Store workout data on the board memory or just work without

recording

• Recall function

• Memory status

• Battery status

• PC USB port interface

• Real time monitoring on the performance monitor or PC

17

Adjustment of resistance

The unlimited range of resistance is given through air displacement

turbine which simulates water fluid dynamics. This air-braking system

allows the using of The Swim ERGOMETER independent of age or

fitness-level. The load is regulated by the pulling effort.

There is additional mechanism for regulation of the fly while drag.

The lever regulates the flow air entering the flywheel. By increasing the

aperture the flow of air and the resistance is increased. For most

exercise and training situations the sportsman will only need to apply the

air-braking system.

Performance Display monitor menu structure

Monitor

Training can be monitored in this mode. There are six modes

available with main big value displayed:

• power (Watt)

• stroke length (cm)

• speed (km/h)

• time /200m

• time /500m

• force (N)

You can scroll round the Text Modes using the UP/DOWN keys on

the monitor.

18

Power Length

Speed Force

19

Workout

Last workout – this repeats the last workout completed

Standard – offers a choice of six pre programmed workouts

• 200 m

• 500 m

• 1000 m

• 10000 m

• 30 minutes

• 60 minutes

ReRide – enables you to race against a previous workout

Custom – allow you to select from your own workouts, which can

be created in New workout

New workout – enables you to define your custom workout

New workout can be defined with time or with distance.

20

Recall

Press ENTER - Each training session can be reviewed in Text

Mode and pre-defined split intervals can be set in Set split.

The split intervals can be set in increments of 1 minute within a

range of 1-250 minutes.

When you enter Text mode use the UP/DOWN keys on the

console to scroll through saved sessions and ENTER to select and

display it.

In selected session pressing the UP/DOWN buttons will allow you

to scroll through the pre-defined split intervals within each session

Press ENTER - In Setup you can setup Memory, HR, Device and see

monitor properties. Use the UP/DOWN keys on the console to scroll

through the displays and ENTER to select an option.

Page is loading ...

Weba Sport SWIM ERGOMETER Operating instructions

Weba Sport SWIM ERGOMETER Operating instructions

Other documents