ROOMS TO GO 21300342, 21300354, 21300366, 21300378 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BRADLEY High Back Office Chair. This document provides a detailed guide on how to put your chair together, including attaching parts, adjusting the height and tilt, and locking mechanisms. I'm ready to answer any questions you have about assembling the chair or its features.
  • Where are the screws and washers located?
    What should I do if I'm missing parts?
    How should I tighten the screws during assembly?
3.29.22 so
During assembly, hand tighten screws only. When
the screws are in place, tighten completely.
1 of 2
Assembly Instructions
BRADLEY High Back Office Chair
PLEASE NOTE: Check that you have received all
components and hardware before assembling.
If you are missing any parts, contact your retailer.
IMPORTANT NOTE:
Screws and washers
(Parts H) are
preassembled into the
underside of the seat
(Part B). Remove screws
and washers from seat
and then use to attach
Part C to Part B, as
shown in step 1.
H
5mm 4mm
1/4” x 5/8”
M8 x 14mm
A (1 pc)
E (1 pc)
I (2 pcs)
M (1 pc)
B (1 pc)
F (1 pc)
C (1 pc)
D (2 pcs)
G (1 pc) H (4 pcs)
K (4 pcs) L (1 pc)
L
B
D
M
LK
J
FA
B
C
G
HE
1
4
7
3
6
2
5
8
FRONT
I
Securely
tighten the
* see
important
note
J (4 pcs)
M8 x 30mm
During assembly, hand tighten screws only. When
the screws are in place, tighten completely.
PLEASE NOTE: Check that you have received all
components and hardware before assembling.
If you are missing any parts, contact your retailer.
Function Description
2 of 2
3.29.22 so
3. To loosen or tighten chair tilt
1. To adjust chair height
2. Chair tilt and lock
* pull out * push in
* pull up
*
* rotate
loosentighten *
/