Summer Infant 07060 Specification

Brand
Summer Infant
Model
07060
Type
Specification

Summer Infant 07060 is a pressure-mounted metal gate that can be used to create a secure barrier between rooms, making it ideal for keeping children or pets contained in a safe area. It has a hinged swinging door that opens easily in either direction with one hand and swings closed automatically. The gate is fully adjustable to fit openings from 28" to 47.5" wide and is 36" tall when installed. It includes one 5" and one 10" extension, so no extra purchase is necessary. The gate is JPMA certified and works in openings with baseboards. A template is included for easy installation.

Here are some of the features and possible use cases of the Summer Infant 07060:

Summer Infant 07060 is a pressure-mounted metal gate that can be used to create a secure barrier between rooms, making it ideal for keeping children or pets contained in a safe area. It has a hinged swinging door that opens easily in either direction with one hand and swings closed automatically. The gate is fully adjustable to fit openings from 28" to 47.5" wide and is 36" tall when installed. It includes one 5" and one 10" extension, so no extra purchase is necessary. The gate is JPMA certified and works in openings with baseboards. A template is included for easy installation.

Here are some of the features and possible use cases of the Summer Infant 07060:

PRODUCT KNOWLEDGE SHEET
Name: Sure and Secure™ Extra Tall Walk-Thru Gate
Product #: 07060
Product Use: To create a secure barrier between rooms. Great for keeping
children or pets contained in a safe area.
General Description:
The Sure and Secure™ Extra Tall Walk-Thru Gate from Summer Infant is
pressure-mounted and helps you create and maintain a secure environment for
your child. It has a hinged swinging door that opens easily in either direction with
one hand. It also swings closed automatically. It’s fully adjustable to fit openings
from 28” to 47.5” wide and is 36” tall.
Instruction booklet and installation template included.
Features: - Pressure mounted metal gate
- Door swings closed and locks automatically
- Simple one-handed operation
- Fully adjustable to fit openings 28” to 47.5” (71 cm to 121 cm)
- 36” (91 cm) tall when installed
- Great room barrier for pets
- Metal construction for security and durability
- Includes one 5” (13 cm) and one 10” (25 cm) extensions; so no extra purchase is
necessary
- JPMA certified
- Works in openings with baseboards
- Template included for easy installation
Age Grade: Birth and Up
Manufactured: In China
Installation: Consumers should plan on about a 20 minutes for proper installation of a pressure
mounted gate. If wall cups are used, installation will take approximately 30 minutes. A
template is provided in the packaging to make the installation as easy as possible.
Please refer to instruction booklet for details.
Helpful Hints: When you unpack the gate, you will notice it is NOT square. This is normal and not
damage to the gate. It is manufactured at a pre-set angle so that when it is installed in
an opening properly, it will maintain the correct amount of tension and cannot be
pushed out of the opening under normal use. The 4 tension bolts, with adjusting
knobs, simply slide into the gate frame; they do NOT screw into place. To create
tension against the walls of the opening, turn the knob on each tension bolt with the
wrench provided until the gate is snug.
PRODUCT KNOWLEDGE SHEET
Page Two: Sure and Secure™ Extra Tall Walk-Thru Gate
Warnings: • TO PREVENT FALLS, NEVER USE AT THE TOP OF THE STAIRS.
• DO NOT USE IF ANY COMPONENTS ARE MISSING OR DAMAGED.
• THIS PRODUCT IS NO SUBSTITUTE FOR PROPER ADULT SUPERVISION.
• THIS PRODUCT CONTAINS SMALL PARTS. ADULT ASSEMBLY REQUIRED.
• EXERCISE CARE WHEN UNPACKING AND ASSEMBLING PRODUCT.
• ALWAYS CLOSE GATE BEHIND YOU.
• TO PREVENT SERIOUS INJURY OR DEATH, SECURELY INSTALL GATE AND
USE ACCORDING TO MANUFACTURER’S INSTRUCTIONS.
• NEVER USE WITH A CHILD ABLE TO CLIMB OVER OR DISLODGE THE GATE.
• NEVER LEAVE CHILD UNATTENDED.
• USE ONLY WITH LOCK SECURELY ENGAGED.
Maintenance: • Regularly check tension rods and rubber pads to make sure the gate is securely in
place.
• Do not use the gate if any components are damaged or missing.
• Wipe surface with a damp cloth or sponge using mild detergent and warm water.
Returns: All Returns are to be RTV (Return-To-Vendor)
  • Page 1 1
  • Page 2 2

Summer Infant 07060 Specification

Brand
Summer Infant
Model
07060
Type
Specification

Summer Infant 07060 is a pressure-mounted metal gate that can be used to create a secure barrier between rooms, making it ideal for keeping children or pets contained in a safe area. It has a hinged swinging door that opens easily in either direction with one hand and swings closed automatically. The gate is fully adjustable to fit openings from 28" to 47.5" wide and is 36" tall when installed. It includes one 5" and one 10" extension, so no extra purchase is necessary. The gate is JPMA certified and works in openings with baseboards. A template is included for easy installation.

Here are some of the features and possible use cases of the Summer Infant 07060:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents