Hyundai LM-02 User manual

Brand: Hyundai

Model: LM-02

Category: Car media receivers

Type: User manual

INSTRUCTION MANUAL

LM-02

MP3/USB/AUX/BLUETOOTH/iPod

CD PLAYER WITH

AM/FM RADIO

Contents

Important Note:

Before operating the unit, please read this manual thoroughly and retain it for

future reference.

Please refer to the main vehicle user manual section ‘Features of Your Vehicle’

for general information regarding radio reception and care and use of the vehicle

mounted antenna, and care and use of media (CDs, USB etc.).

The operation of the

steering wheel remote controls

shown in the main vehicle

user manual are not relevant to the radio model depicted in this user manual.

Contents:

1. General Controls --------------------------------------------------------------- Page 04

2. Steering Wheel Controls ----------------------------------------------------- Page 09

3. AM/FM Tuner

------------------------------------------------------------------- Page 10

4. CD-DA Player ------------------------------------------------------------------- Page 12

5. CD-MP3/WMA Player

--------------------------------------------------------- Page 15

6. USB Player ---------------------------------------------------------------------- Page 18

7. iPod Player

---------------------------------------------------------------------- Page 20

8. AUX Input ------------------------------------------------------------------------ Page 23

9. My Music ------------------------------------------------------------------------- Page 25

10. Bluetooth Audio Player

----------------------------------------------------- Page 28

11. Memo ---------------------------------------------------------------------------- Page 31

12. Bluetooth

------------------------------------------------------------------------ Page 32

13. Telephone

---------------------------------------------------------------------- Page 37

14. Setting --------------------------------------------------------------------------- Page 42

15. Firmware Upgrade ----------------------------------------------------------- Page 45

16. Handling Compact Discs --------------------------------------------------- Page 47

17. Product and Warranty Service -------------------------------------------- Page 48

18. MP3/WMA Information

------------------------------------------------------ Page 49

19. Warnings and Precautions

------------------------------------------------- Page 50

20. Specifications ----------------------------------------------------------------- Page 51

Front Panel Controls

Note: Before using the audio, remove the LCD protective tape. Operating the touch screen

without removing the LCD protective tape may lead to abnormal operations.



Power On / Off / Volume



Audio settings / Tuning / Other



RADIO Button



MEDIA Button



SETUP Button



EQ Button(EQUALIZER)



Off Hook Button



On Hook Button



Automatical Up Tuning

rack Up & CUE



Automatical Down Tuning

TRACK DOWN & REVIEW



DISP Button



DISC Slot



DISC Eject Button



Warning LED



Microphone



Preset 1~6 Memory

































General

1. General Controls



Power On/Off

Press knob  momentarily to turn the radio on or off.

Via Steering wheel remote control:

Press and hold the MODE button on the steering wheel controls to turn the radio on or off.



Volume Up/Down

Turn knob  right to increase the volume level. The level will be shown on the display. Turn

knob

 left to decrease the volume level. After 3 seconds the display will return to the

previous mode.



Initial Volume Setting

The initial volume setting is the volume level the radio will play at when next turned on. To

adjust:

1) Press and hold knob

 longer than 2 seconds. The display will change to Initial Volume

screen.

2) The current initial volume level is displayed.

3) Turn knob

 right or left to increase or decrease the initial volume, then press knob 

again to set that volume level as the initial volume level the radio will play at when next

turned on.



Audio Settings

The tone and individual speaker levels may be adjusted.

1) Press knob

; the display shows the current level setting.

2) Turn knob

 to adjust the level setting.

3) Press knob

 to adjust the next audio setting. The sequence of selection is below:

4) Refer section 14. 2.2 for more information on adjust the level.



RADIO Button

This button operates several tuner functions:

1) Press button

 to select the tuner mode when radio off.

2) Press button

 to select the tuner mode when another mode is operating.

3) Press button

 to change the radio wave band. The sequence of selection is below:

FM1 → FM2 → FM3 → AM

Bass → Middle → Treble → Balance → Fader

General



MEDIA Button

1) Press button  to select the last media mode when radio off.

2) Press the button

 to change to the next available mode. The complete mode sequence

for selection is shown below:

Note: Only those mode sources connected will be displayed.



SETUP Button

Press button



to set system features and options. For more information, refer to section 14.



Equalizer Setting (EQ Button)

An equalizer curve for different music types may be selected (CLASSIC, POP, ROCK, and

JAZZ).

Press button

 repeatedly until the desired equalizer effect icon is displayed on the top of the

display.

The sequence of EQ styles is displayed as follows:

NOR(Normal) → CLA(Classic) → POP → ROCK → JAZZ



Off Hook Button

This button operates several functions:

1) Press the button selects the Device Manager when Bluetooth is disconnected.

Refer section 13.3.1.

2) Press the button selects the Phone screen when Bluetooth is connected.

Refer section 13.

3) Press the button accepts an incoming phone call.

4) Hold and press the button redials the last dialed phone number.



On Hook Button

This button operates several functions:

1) Press the button rejects an incoming call.

2) Press the button ends an active phone call.

3) Press the button cancels Phone screen.

→

USB/iPod

→

AUX

→

My Music

→

BT Audio

→

Memo

General



Display Setting (DISP button)

The radio display may be switched off to reduce the amount of light inside the vehicle cabin at

night.

Press button



to switch the screen on or off.

Note:

a. If the screen is switched off, radio operation continues.

b. If any control on the radio or steering wheel remote radio control is operated, the screen

automatically reappears. Press the button again to switch the screen off if desired.



DISC Slot

With the printed label surface facing upwards, gently insert the disc into the slot until the soft

loading mechanism engages.



DISC Eject Button

This button  will eject the disc and the radio will return to the previous mode.

Note: If the eject function does not operate due to an internal error press and hold the DISC

EJECT button for more than 2 seconds.



Warning LED

This LED lamp blinks every 1 second when the ignition is turned OFF to act as a deterrent

against theft.

General

1.1 Media Selection screen

1) Press the media icon or picture tat the top left hand corner of the display to select the Media

Selection screen when the radio or another media mode is operating. The Media Selection

screen is display as below:

2) Press the desired media icon to select that mode.

3) If a selection is not made selected within 10 seconds, the previous screen will automatically

be restored.

4) If the icon of a media mode is ‘greyed’ out, it is not available for selection as it may not be

connected or have any media available to play.

1.2 Recording Function

It is possible to record the audio whilst listening to RADIO, AUX, BT AUDIO, CD or IPOD.

A function to record voices inside the car cabin using the in-build microphone is also possible.

See section 11 for details to record voice using the MEMO feature.

1) Whilst listening to any of the above media sources RADIO, AUX, BT AUDIO, CD or IPOD

Press the

REC

button on the screen to record the current playing media. Once recording

starts, the

REC

button will blink on the screen and the elapsed time of the current recording

and total available time for recording remaining are displayed on the screen.

2) During recording, press the

PAUSE

button to pause recording. Press the

REC

button again

to re-start recording.

3) Press the

STOP

button on the screen to stop recording. To save the recording press the

YES

button to save the recorded file with the file name displayed on the screen. Press the

button to cancel and discard the recording. Press the

RENAME

button to change the file

name (see following below for details).

The recorded file is stored in the internal memory of the car audio set and can be played from

the ‘My Music’ mode. For more information regarding My Music, refer to section 9.

Note

a. The all buttons and controls other than VOL, MUTE, PAUSE and STOP are disabled

during recording.

b. PAUSE is not usable during recording of CD or iPod.

c. CD and iPod recordings are saved as a continuous track or file.

General

d. When the internal memory of the HYUNDAI Bluetooth radio is full,

MEMORY FULL

appears on the display. The RECORD and COPY feature is then not available until some

stored files are deleted. Check the memory usage level by pressing the SET UP button

and then selecting ‘About’.

The Hyundai Bluetooth radio can store 999 files within internal memory. When the 1000

file is stored,

INDEX FULL

appears on the display. The RECORD and COPY feature is

then not available until some stored files are deleted.

1.3 Changing the File Name

1) If the recorded file is to be renamed press the

RENAME

button on the screen. The display

shows the following:

2) Use the keypad to change the file name. The table below shows more information of the

buttons displayed within the keypad screen.

ral

3) Press the

STORE

button to save changes to the file name.

Note:

a. Some characters may not be supported, eg: ( ? “ < > * / : )

b. Files with identical file names cannot be saved.

c. Up to 27 characters can be used for file names.

Button

Description

Used to insert a capital letter

Used to insert a backspace

.?123

Used to insert symbols and numbers

#+=

Used to insert special characters

123

Used to insert numbers

ABC

Used to insert English alphabet

SPEACE

Used to insert blank spaces

Steering Wheel Controls (if fitted)

2. Steering Wheel Controls

2.1 VOLUME (+ / - ) button

Push the toggle switch toward + and - to increase or decrease the volume level.

2.2 SEEK (

∧

∨

) button

Tuner Mode

Press the SEEK buttons for less than 1 second to change the radio station to the next preset

memory.

Press the SEEK buttons for longer than 1 second to seek to the next available radio station.

CD / USB / BT Audio / My Music Mode

Press the SEEK buttons for less than 1 second to change to the next track.

Press and hold the SEEK button to CUE or REVIEW the current playing track.

Note:

a. The SEEK buttons may not operate when using some Bluetooth music players.

b. CUE and REVIEW is not available when using BT Audio mode.

2.3 MODE button

Press the MODE button for less than 1 second to change to the next available mode. The

complete mode sequence for selection is shown below:

Press the MODE button for more than 1 second to switch the HYUNDAI Bluetooth radio off.

Note: Only those mode sources connected will be displayed and available for selection when

using the steering wheel MODE button.

Note: The Memo mode will not appear when selecting modes if there are no memo files

recorded.

2.4 MUTE button

Press the MUTE button to switch off the sound. Press the MUTE button again to restore the

volume to the last selected level.

FM1

→

FM2

→

FM3

→

USB/iPod

→

AUX

→

My Music

→

BT Audio

AM/FM Tuner

3.1 AM/FM Tuner Screen

Display or Button

Description

Displays the FM1, FM3, FM3, and AM modes

Displays the currently playing frequency

Displays preset frequencies

Records currently playing broadcast

Shows preset list

Saves frequencies with superior reception to preset

buttons

Converts frequency bandwidth in order of FM1 -> FM2 -

> FM3 -> AM

3.2



�TUNE Button

To manually tune to a radio station, turn knob

 right or left to increase or decrease the radio

frequency.

3.3

,  Up/Down Tuning Buttons

To search for the next available radio station, momentarily press button

 or button .

3.4 Preset memory

These buttons operate in two ways when tuner mode is active:

1) Press buttons

 or preset button on the display for less than 2 seconds will recall the radio

station memorized to that preset button memory.

2) Press buttons

 or preset button on the display for more than 2 seconds store the current

tuned radio station into that preset pressed.

Note: Preset station memories are lost if the vehicle battery is disconnected.

AM/FM Tuner

3.5 Recording

Press the

REC

button to start recording the current broadcast. For more information on the

recording feature, refer to section 1. 2.

3.6 Viewing Preset Frequency Lists

1) Press the

LIST

button to display the preset station frequencies.

2) Up to 6 stations can be saved in presets for each band FM1, FM2, FM3 and AM.

3) From the list, press the desired radio band

4) Press the desired preset to select that station. The HYUNDAI Bluetooth radio will call

selected station

5) Press the button or the button



to restore the previous screen.

3.7 Best Station Memory (BSM)

Press the BSM button to activate the BSM function. The radio stations in the vicinity of the

vehicle that are of acceptable reception quality are automatically stored in the radio preset

button memory locations.

3.8 Selecting Radio Band

Press BAND button to change the radio wave band. The sequence of selection is below:

FM1 → FM2 → FM3 → AM

CD Player

4. CD Player

4.1 Playing Music CDs

Music CDs (other than CDs containing MP3 or WMA files) may be played.

1) Insert the CD is inserted into the disc slot, the radio will display Loading.

2) The radio will display Reading and then begin playback of music.

3) If another mode is selected, CD play may be resumed by pressing the button

 on the

radio or by pressing the MODE button on the steering wheel.

4) The radio display shows the track name.

4.2 CD-DA Player Screen

Button

Description

Current track /Total tracks

Displays the play time for the current track

Displays the track name

Records the currently playing song

Displays file list within the disc

Scans the beginning parts of disc tracks in sequential order

(approx 10 seconds per track)

Repeats the current track

Plays disc tracks in random order

CD Player

4.3 Recording

Press the

REC

button to start recording the current track. For more information on the recording

feature, refer to section 1. 2.

In CD mode, the PAUSE feature is not supported during recording.

4.4

 Track Up / Cue

This button

 is used to select track up. When this button  is pressed, playback of the

next track is started. Each time the button

 is pressed, the track number to be played is

increased. Press and hold this button

 to CUE or advance rapidly in the forward direction.

4.5

 Track Down / Review

This button

 is used to select track down. When this button  is pressed, playback of the

current track is re-started and if pressed again, the playback of the previous track begins.

Press and hold this button

 to REVIEW or advance rapidly in the backward direction.

Note: When playing MP3 or WMA tracks, the CUE and REVIEW function is available but

audio content is not with heard during that function.

4.6 Viewing Track List within DISC

1) Press the

LIST

button to display the track list within the disc.

2) Select the desired track from the list to play the track.

3) Press the ▲ button to move to the previous list page and the ▼ button to move to the next

list page.

4) Press the button or the button



to restore the previous screen.

CD Player

4.7 Track Scan

SCAN button when press will play the first 10 seconds of each track on the disc. SCAN will

appear on the display. When the desired track is reached, press the button again to cancel

the function. The set will then play the selected track.

4.8 Repeat Play

During disc play, press RPT button to play the selected track repeatedly. RPT will appear on

the display. Playback of the same track will continue to repeat until the button is pressed

again. Press the button again to cancel the repeat function.

4.9 Random Play

During disc play, press RDM button to play tracks on the disc in a random or shuffled order.

RDM will appear on the display. The track select function will also select tracks in the random

mode instead of the normal sequence. Press the button again to cancel the random function.

4.10 Track Browser

A function to locate a specific track is provided in the radio:

1) Turn knob

 to display the tracks available on the CD.

2) When the desired track is displayed, press knob

 to begin playback of that track.

CD-MP3/WMA Player

5. CD-MP3/WMA Player

5.1 Playing Music Using CD-MP3/WMA

1) Insert the CD-MP3/WMA disc located disc slot. The radio will display Loading.

2) The radio will display Reading on the screen and the begin playing music once loading is

complete.

3) If another mode is selected, CD-MP3/WMA player may be resumed by pressing the button

 on the radio or by pressing the MODE button on the steering wheel.

4) The radio display shows the file ID3 information. If the ID3 information is too long to be

display at once, the display will scroll the ID3 information when pressed.

Note: The HYUNDAI Bluetooth radio is realize 999 files stored CD-MP3/WMA disc.

5.2 CD-MP3/WMA Screen

Button Description

Current file /Total file

Displays the play time for the current file

Displays current file information

(Title, Artist, Album Name)

Copies the currently playing file

Displays file list within the disc

Scans the beginning parts of files in sequential order

(approx 10 seconds per file)

Repeats the current file

Plays files within the disc in random order

CD-MP3/WMA Player

5.3 Copying Files

1) Press the

COPY

button to copy the currently playing file.

2) Once copying starts, the currently playing file is stopped and the

COPY

button will blink on

the screen.

3) Press the

CANCEL

button to cancel copying and re-start the current file.

4) Once copying is complete, the

COPY

button disappears and the paused file will re-start.

5) The copied file is stored to the internal memory and can be played within My Music mode.

For more information, refer to section 9.

5.4 File Browser

5.4.1 File browser using knob



The file browser is a feature used to locate specific files within the radio.

1) Turn knob

 to display the files available on the CD.

2) When the desired file is displayed, press knob

 to begin playback of that file.

5.4.2 File browser using file List

1) Press the

LIST

button to display the list of files within the disc.

2) Select the desired file from the list to play the file.

3) Press the ▲ button to move to the previous list page and the ▼ button to move to the

next list page.

4) Press the

◀

button to move to the previous folder and the

▶

button to move to the next

folder.

5) Press the button or the button



to restore the previous screen.

CD-MP3/WMA Player

5.5

 File Up / Cue

This button

 is used to select file up. When this button is pressed, playback of the next

file is started. Each time the button

 is pressed, the file number to be played is increased.

Press and hold this button

 to CUE or advance rapidly in the forward direction.

5.6

 File Down / Review

This button

 is used to select file down. When this button  is pressed, playback of the

current file is re-started and if pressed again, the playback of the previous file begins.

Press and hold this button

 to REVIEW or advance rapidly in the backward direction.

5.7 File Scan

SCAN button when press will play the first 10 seconds of each file on the disc. SCAN will

appear on the display. When the desired file is reached, press the button again to cancel the

function. The set will then play the selected file.

If playing MP3 / WMA files in folders, press and hold the SCAN button; SCN-F will appear on

the display; files within the current folder will play the first 10 seconds of each file.

5.8 Repeat Play

During disc play, press RPT button to play the selected file repeatedly. RPT will appear on the

display. Playback of the same file will continue to repeat until the button is pressed again.

Press the button again to cancel the repeat function.

If playing MP3 / WMA files in folders, press and hold the RPT button; RPT-F will appear on the

display; files within the current folder will be repeated.

5.9 Random Play

During disc play, press RDM button to play files on the disc in a random or shuffled order.

RDM will appear on the display. The track select function will also select files in the random

mode instead of the normal sequence. Press the button again to cancel the random function.

If playing MP3 / WMA files in folders, press and hold the RDM button; RDM-F will appears on

the display; files within the current folder will be played in random order.

USB Player

6. USB Player

MP3 and WMA music files located on a memory device connected using the USB socket may be

played by the HYUNDAI Bluetooth radio. Refer to section 5 (CD-MP3/WMA Player) for

controlling the playback of MP3 / WMA files. The same method of control is used when MP3 /

WMA files are stored on either a CD or USB device.

6.1 Playing Music Using USB device

1) To play music files using the USB connection, connect your USB device to the USB socket

located lower on the centre console. (See below picture)

2) When the USB memory device is connected, the radio will change to USB Mode, display

Reading and then music playback will begin.

3) If another mode is selected, USB player may be resumed by pressing the button

 on the

radio or by pressing the MODE button on the steering wheel.

4) The radio display shows the file ID3 information. If the ID3 information is too long for the

display, the display scrolls when press that ID3 information.

Notes When Using the USB Player:

a. If there are no compatible music files found on the USB device, the radio returns to the

previous mode and displays No File.

b. USB Error will be displayed if the USB device is not compatible with the radio.

c. Use of MULTI-CARD READER devices may not work correctly.

d. USB music players will be recognized as storage devices by the radio.

e. The HYUNDAI Bluetooth radio will recognize up to 2000 files stored on a USB device.

USB socket located lower on the centre console.

Music

Player

USB Memory Device

USB Player

6.2 USB Player Screen

Button

Description

Current file /Total files

Displays the play time for the current file

Displays current file information

(Title, Artist, Album Name)

Copies the currently playing file

Displays file list within the USB device

Scans the beginning parts of files in sequential order

(approx 10 seconds per file)

Repeats the current file

Plays files within the USB device in random order

6.3 Charging USB Player

When a USB device is connected to the radio, the USB device will be charged whilst the

vehicle ACC switch is ON. The radio does not need to be operating.

Notes When Using the USB Socket for Charging:

a. Effective battery charging of USB devices using the USB socket cannot be assured.

b. The power is available at the USB socket when the vehicle ignition switch is in the ACC

position. The radio is not required to be operating.

iPod Player

7. iPod Player

7.1 Playing Music Using iPod via USB.

1) Connect the iPod to the USB socket located lower on the centre console using the cable

supplied with iPod (see 18 page).

2) The radio will display Reading and the begin playback of music.

3) If another mode is selected, iPod player may be resumed by pressing the button

 on the

radio or by pressing the MODE button on the steering wheel.

4) The radio display shows the file ID3 information. If the ID3 information is too long for the

display, the display scrolls when press that ID3 information.

7.2 iPod Player Screen

Button Description

Current file / Total files within the current category

Displays the play time for the current file

Displays current file information

(Title, Artist, Album Name)

Records the currently playing file

Displays the CATEGORY SEARCH screen

Repeats the current file

Plays files within the iPod in random order

Page is loading ...

Hyundai LM-02 User manual

Brand: Hyundai

Model: LM-02

Category: Car media receivers

Type: User manual

Download PDF

report

Hyundai LM-02 User manual

Hyundai LM-02 User manual

Related papers

Other documents