2. River of Goods
  3. 15167

River of Goods 15167 Operating instructions

  • Hello! I've reviewed the assembly instructions for the lamp you have. This document outlines how to put it together, including the bulb type, shade installation, safety precautions and use of the in-line switch for operating the lamp. I'm ready to answer any questions you have about assembling or using your new lamp.
  • What type of bulb should I use?
    How do I replace the bulb?
    What type of plug is installed?
    How do I turn the lamp on and off?
Assembly Instructions
1. Carefully layout all parts in a line on a smooth surface, and use the following steps to assemble the lamp.
2. Install an E12, Type B, 15 Watt bulb (not included) or E12, LED, 1 watt bulb (not included)
Note: For bulb replacement, remove shade and replace the bulb.
3. Next carefully install the shade into base.
NOTE: Please be careful when installing the shade into the base, the shade is fragile.
4. Plug into the wall outlet for use.
5. Use the in-line switch to turn the item ON and OFF
Note: The below diagram illustrates the installation of your new luminary. This is a representative drawing and is not
intended to match the style of your luminary.
Important Safety Instruction
This portable lamp has a polarized plug (One blade is wider than
the other) as a safety feature to reduce the risk of the electric shock.
This plug will fit in a polarized outlet only one way. If the plug does
not fit in the outlet, reverse the plug. If it still does not fit, consult a
qualified electrician. Never use an extension cord unless the plug
can be fully inserted. Do not alter the plug.
/