River of Goods 12642H Installation guide

INSTRUCTIONS

Note: The diagram illustrates the installation of your new luminary. This is a representative drawing and

is not intended to match the style of your luminary.

Assembly:

1. Make sure that your lamp is not plugged into the

electrical outlet.

2. Insert the light bulb “A” into the socket “B”.

CAUTION - Refer to the wattage caution label

located near the lamp holder for recommended

maximum wattage-do not exceeds recommended

wattage.

WARNING - Do not attempt to replace the bulb

while the lamp is plugged into a wall receptacle.

3. Squeeze the two spring clips "C" and insert them

into the glass shade "D". Please note: The spring

clips are designed to properly hold this style of

shade, make sure you proceed with caution to

avoid getting your fingers pinched.

4. Plug the electrical cord into an outlet and turn on

the lamp with the line switch.

WARNING

Keep this lamp away from small children.

It is not a toy.

CARE INSTRUCTION：Dry cloths clean only; do not use water.

Important Safety Instruction

This portable lamp has a polarized plug (one blade is wider than the other)

as a safety feature to reduce the risk of the electric shock. This plug will

fit in a polarized outlet only one way. If it does not fit in the outlet, reverse the

plug. If it still does not fit, consult a qualified electrician. Never use an

extension cord unless the plug can be fully inserted. Do not alter the plug.

This manual is also suitable for

Download PDF