Rollplay W407AC-B Owner's Manual And Assembly Instructions

Brand: Rollplay

Model: W407AC-B

Category: Toys & accessories

Type: Owner's Manual And Assembly Instructions

This manual is also suitable for

Read and understand the entire manual before assembly and operation. The vehicle must be

assembled by an adult who has read and understands the instructions.

Made in China.

Styles and colors may vary. Do not return to store. Call 1-888-982-9309 for assistance and

replacement parts.

IMPORTANT:

Save this manual with your sales receipt.

Owner’s Manual and Assembly Instructions

Model #: W407AC, W407AC-B, W407AC-P

6V Dizzy Driver

Introduction

Thank you for purchasing this Rollplay vehicle. We hope the rider enjoys

it for miles to come. Please read this instruction guide carefully before

assembling and operating the vehicle. Please have your model number

and serial number ready before calling. Please have proof of purchase.

Keep your sales receipt or register your product at

www.rollplay.com.

Please contact Rollplay Customer Service with any questions.

Hours: 9 AM - 5 PM (CST), Monday - Friday

Phone: 1-888-982-9309

Email: customerservice@rollplay.com

Web: www.rollplay.com

Speciﬁcations:

BATTERY 6V 4AH

MOTOR 6V 15W

AGE 18 Months - 3 Years

MAX WEIGHT 25 kg (55 lbs)

PRODUCT SIZE 82.2 x 49.3 x 48.3 cm (32.4” x 19.4” x 19”)

SPEED 2 km/h (1.25 MPH)

RECHARGE TIME 8-12 Hours

TYPICAL RUN TIME 1-2 Hours

CHARGER OUTPUT DC 7.0V0.7A

IMPORTANT!

YOU MUST CHARGE THE BATTERY

FOR 24 HOURS BEFORE FIRST USE!

Charge the battery after each use.

Charge the battery at least once a month, even if the vehicle is not in use.

DO NOT RETURN THIS ITEM

TO THE STORE!

Call Customer Service if you need assistance or replacement parts. Please

have your model number and serial number ready before calling. Please

have proof of purchase. Keep your sales receipt or register your product at

www.rollplay.com as we may require proof of purchase.

1-888-982-9309

Read this entire manual to ensure

proper assembly and safe operation

of the vehicle.

4Table of Contents

Safety ..........................................................5

Parts ..........................................................7

Charging Instructions ...............................8

Assemble the Rear Wheel Panel ..............9

Assemble the Decorative Wheels ..........10

Assemble the Front Drive Wheel / Steering Rod ........... 11

Assemble the Front Drive Wheel / Steering Rod ........... 12

Assemble the Battery ..............................17

Assemble the Dashboard .......................13

Assemble the Steering Wheel ................14

Assemble the Windshield .......................15

Assemble the seat .................................. 16

Operation Instructions ............................18

Maintenance ............................................19

General Care ............................................20

Troubleshooting Guide ............................21

FCC Information ......................................22

Service and Repairs ...............................23

Warranty ...................................................24

Product Registration ...............................25

Safety

WARNING: SAFETY RIDING RULES

The user must follow all safety rules and guidelines, or serious injury or death may

occur to the user.

• Always use common sense and safe practices when using the vehicle. The user

must be at least 18 months old and weigh no more than 25 kg (55 lbs).

• This product contains small parts that are for adult assembly only. Keep small

children away when assembling. Remove and dispose of all protective material

and plastic bags before assembly.

• Riders must always wear a tted helmet that complies with U.S. Consumer

Product Safety Commission (CPSC) Standard 16 CFR 1203.

• Only sit on the seat in the vehicle.

• Do not allow more than one rider.

• Do not overload the vehicle. Do not remove the weight restriction decals.

• Do not pull the vehicle with another vehicle or similar device.

• Keep body parts such as hands, legs, hair and clothing away from moving parts.

Moving parts can cause serious injury.

• Always wear shoes in the vehicle.

• Do not operate near streets or motor vehicles.

• Do not operate near drop-offs such as steps, steep inclines or hills. Operate on

relatively level ground.

• Do not operate near water, swimming pools or other uids.

• Do not operate in dangerous weather conditions such as rain or snow.

• Do not operate near loose dirt, mud, sand or ne gravel.

• Do not operate near ammable vapors (gasoline, paint thinner, acetone, etc.).

• Always use the vehicle in a safe, secure environment with adult supervision.

PREVENT INJURIES AND DEATHS:

NEVER LEAVE CHILD UNATTENDED. ALWAYS keep child in view when child is in

vehicle. Direct adult supervision is REQUIRED.

NEVER use in roadways, near cars, on or near steep inclines or steps, swimming

pools or other bodies of water.

ALWAYS wear shoes

ALWAYS sit on the seat

RISK OF FIRE. Do not bypass.

6Safety

(Continued)

WARNING: BATTERY SAFETY

• Battery posts, terminals and related accessories contain lead and lead compound

(asic) chemicals known to the state of California to cause cancer, reproductive

harm, and are toxic and corrosive. DO NOT open the battery.

• Contact exposure to battery leakage (lead acid) may cause serious injury.

Immediately contact your doctor if exposure occurs. If the chemical is on the skin,

ush immediately with cool water for 15 minutes. If the chemical is swallowed,

immediately give the person water or milk. Do not give water or milk if the person

is vomiting or has decreased alertness. Do not induce vomiting.

• Tampering with or modifying the electric circuit system may cause shock, re or

explosion. It could permanently damage the system. Keep the charger housing

closed to prevent exposed wiring, which may cause electric shock.

IMPORTANT: Before using the vehicle for the rst time, the battery must be

charged for a full 24 hours (no more than 30 hours).

WARNING: ADULT SUPERVISION

REQUIRED

• Before using the vehicle, the rider must understand the vehicle controls and safety

issues.

• It is the responsibility of the adult to educate the child and to determine if the child

is capable of understanding the vehicle controls.

• An adult must ALWAYS directly supervise the use of this vehicle.

• NEVER leave a child unsupervised in the vehicle.

Parts

1. Main Body

2. Windshield

3. Dashboard

4. Steering Wheel Support Tube

5. Steering Wheel

6. Rear Wheel Panel

7. Battery

8. Battery Compartment Cover

9. Seat

10. Front Drive Wheel

11. Support Wheel (L and R)

12. Position Limit

13. Decorative Wheels (4)

14. Decorative Wheel Connectors (4)

15. Front Wheel Caps (2)

16. Rear Wheel Caps (2)

17. Steering Rod Assembly

18. Rear Wheels (2) (Pre-assembled)

19. Rear Axles (2) (Pre-assembled)

20. Rear Axle Clamps (2) (Pre-

assembled)

21. Manual

Located in Blister Pack:

22. Steering Wheel Screw (2)

23. Square Nut (2)

24. Type A Screw (26 + 2 spares)

25. Washer Head Screw (7 + 2 spares)

26. Blister Pack

10 13

14 16

• Phillips screwdriver

Not Included:

8Charging Instructions

ONLY AN ADULT SHOULD HANDLE THE BATTERY AND CHARGER.

To Charge the Battery:

1. Ensure the vehicle is stopped and turned

off.

2. Unlock and remove the battery

compartment cover.

3. Locate the red battery connector (A) that

attaches directly to the battery.

4. Connect the red battery connector to the

red battery charger connector (B).

5. Plug into a 120 V outlet.

To Reconnect the Battery:

6. Unplug the battery charger from the

outlet.

7. Unplug the red battery connector from

the red charger connector (B) by pushing

down on the red clip on the battery

connector.

8. Connect the red battery connector (A) to

the red engine connector (C).

9. Replace the battery compartment cover

and tighten lock.

Note: It is not necessary to remove the

battery for charging. However, if the battery

does not reach the outlet, it can be removed

for charging. Always push down on the

red clip on the battery connector before

connecting or unplugging.

YOU MUST CHARGE THE BATTERY FOR HOURS

BEFORE THE FIRST USE!

A B

Assemble the Rear Wheel Panel

1. Remove the battery before assembly.

2. To assemble the rear wheel panel (6), ip the body of the car onto its back.

3. Align the 6 holes on the rear wheel panel with the holes on the back of the car

body. Insert the panel into the car body. Be careful of not to pinch or cut any of

the wires while assembling.

4. Use 6 Type A screws (24) to secure the panel in place.

10 Assemble the Decorative Wheels

1. Once the wheel assembly is

complete, slide the decorative

wheel assembly until it

completely clicks into the front

and rear wheel caps (15 and

16).

2. Align the holes on the wheel

seats with the holes under the

car body, and use two Type A

screws (24) for each wheel to

affix them to the body.

1. Algin the 3 holes on the

decorative wheel connector

(14) with the holes on the

inside of the decorative wheel

(15).

2. Note that the slot on the

connector must be aligned

with the plastic tab on the

wheel to properly t, and the

connector will click into place.

3. Insert 3 Type A screws (24)

into the holes, and tighten

with a screwdriver.

4. Repeat for the other wheels.

Front Decorative Wheel Rear Decorative Wheel

Assemble the Front Drive Wheel / Steering Rod

1. Remove the rubber stopper from the

front drive wheel (10).

2. Locate the four washer head screws

(25) from the blister pack.

3. Align the support wheels (11) with the

front drive wheel, and insert one

screw (25) for each support wheel.

4. Note: The support wheels have a Left

and Right version to correspond with

the holes on the Front Drive wheel.

R L

rubber stoper

1. Insert the front drive wheel into

the axle hole underneath the car

body as shown in Step 1 of the

photo above.

2. Connect the white connector from

the front drive wheel with the

white connector coming from the

car body.

3. While holding the front drive

wheel in place, carefully turn the

car over.

12 Assemble the Front Drive Wheel / Steering Rod

1. Locate the steering rod assembly (17). Slide the middle post on the

assembly into the top of the axle of the front drive wheel, and align the

holes on the axle with the holes on the assembly. Insert 4 screws (25)

into the holes and tighten with a screwdriver.

2. Insert a square nut (23) into the square hole, and insert the screw

(22) into the other side. Tighten with a screwdriver.

3. Align the 4 holes on the assembly with the four holes on the car body as

shown in Step 4 above.

4. Slide the position limit (12) onto the screw column, and insert a Washer

Head screw (25).

1. Insert the steering rod into the hole on the dashboard.

2. Push the black switches on the dashboard (3) inward.

3. Insert the square tabs on the dashboard into the square holes on the

front of the car body.

4. Slide the dashboard forward and down until it completely clicks into

place.

5. Then release the black switches.

Assemble the Dashboard

1. Insert the steering wheel support tube (4) onto the steering wheel axle

until it clicks into place with the dashboard. Ensure that the arrow

indicator is pointing forward.

2. Slide the steering wheel (5) onto the steering wheel axle with the arrow

indicator pointing forward.

3. Align the holes on the steering wheel with the holes on the axle, then

insert a screw (22) and nut (23) into either side of the steering wheel.

4. Tighten with a screwdriver.

Assemble the Steering Wheel

1. Align the tabs on the top of the windshield (2) with the slots on the car

body.

2. Snap them into place.

3. Then snap the bottom tab of the windshield into place.

4. The windshield opens and closes to act as a storage compartment.

Assemble the Windshield

1. Slide the square tabs on either side of the seat (9) into the

corresponding square hole on the car body.

2. Push the seat until the latches on the back of the seat snap into place.

Assemble the seat

Assemble the Battery

1. After charging the battery for 24 hours, insert the battery (7) into the rear

battery compartment of the car body.

2. Connect the red battery connector to the red car connector. Push

the black fuse box down into the spare room on the left side of the

compartment so it is out of the way.

3. Switch the lock position to unlock on the battery compartment cover

(8), and insert the hook into the hole on the battery compartment.

18 Operation Instructions

• The Dizzy Driver does not have a power switch.

• Press the foot pedal down to move.

• Release the foot pedal to stop.

• The arrow mark on the steering wheel indicates dierction.

• The steering wheel controls the car and allows it to rotate 180 degrees

in the left and right directions.

Steering Wheel

Pedal

Forward

Maintenance

Important Battery and Charger Information

• Only an adult who has read and understands the safety warnings may

handle and operate the battery and battery charger. Keep away from

children.

• Charge the battery for 24 hours before using the vehicle for the rst

time.

• Recharge the battery immediately after each use. Charge for at least

8-12 hours, but no more than 20 hours.

• Charge the battery at least once a month, even if the vehicle is not used

or stored.

• Never leave the battery in a discharged condition.

• Connect the terminal of the battery and charger, then plug the charger

into a 120V AC outlet.

• It is normal for the charger to heat slightly. If the charger rises above

71°C / 160°F, disconnect the charger and call Customer Service for

assistance.

• Keep the charger away from water or excessive moisture to prevent

short-circuiting.

• Only use the charger specied with the original item. Do not charge the

battery with any other charger.

• Do not attempt to recharge non-rechargeable batteries with the original

charger.

• Do not replace the battery with any other battery, or the warranty

will be voided. If you need a replacement battery, see Page 24 for

replacement information.

• Remove damaged batteries from the car immediately. Recycle or

dispose of the used batteries responsibly.

• Do not short circuit the supply terminals.

• Do not leave the battery connected in the vehicle for extended periods

of time when the vehicle is not being used. Disconnect the battery

connector from the engine connector before storing.

• The vehicle is equipped with a thermal fuse to protect the electric

circuit. If the vehicle cuts out, turn the vehicle off and on to reset.

20 General Care

• Regularly inspect all vehicle parts to ensure they are in good working

condition.

• Regularly inspect the charger, cord, plug, and other related parts for

damage.

• Remove any damaged parts and immediately contact Customer Service

for replacement parts. See Service information on Page 24.

• DO NOT operate the vehicle if there are any damaged parts.

• Carefully clean the vehicle with a damp cloth and mild soap. Do not

get water in or near any electrical parts. Do not wash the vehicle with a

hose.

• Store the vehicle indoors or use a tarp to cover it. Keep away from

stoves, heaters, or other sources of heat.

Page is loading ...

Rollplay W407AC-B Owner's Manual And Assembly Instructions

Brand: Rollplay

Model: W407AC-B

Category: Toys & accessories

Type: Owner's Manual And Assembly Instructions

This manual is also suitable for

Download PDF

report

Rollplay W407AC-B Owner's Manual And Assembly Instructions

This manual is also suitable for

Rollplay W407AC-B Owner's Manual And Assembly Instructions

Related papers

Other documents