NoiseMeters SoundEar II Noise Activated Warning Sign User manual

SoundEar II Noise Activated Warning Sign
Brand
NoiseMeters
Model
SoundEar II Noise Activated Warning Sign
Type
User manual

NoiseMeters SoundEar II Noise Activated Warning Sign is a device that helps you monitor noise levels and provides a visual warning when the noise limit is exceeded. It has 16 different noise limits ranging from 45 to 115 dB(A), which can be set using the red wheel at the bottom of the device. The sign has a green light for acceptable noise levels, a yellow light for approaching the limit, and a red light for exceeding the limit. It can be mounted on the wall at a height of 150-200 cm and is powered by a 24VDC adapter.

NoiseMeters SoundEar II Noise Activated Warning Sign is a device that helps you monitor noise levels and provides a visual warning when the noise limit is exceeded. It has 16 different noise limits ranging from 45 to 115 dB(A), which can be set using the red wheel at the bottom of the device. The sign has a green light for acceptable noise levels, a yellow light for approaching the limit, and a red light for exceeding the limit. It can be mounted on the wall at a height of 150-200 cm and is powered by a 24VDC adapter.

SoundEar II
NoiseMeters
Noise Activated Warning Sign
®
Setting the Noise Limit
Mounting and Powering
You can set the SoundEar II to provide a visual warning, consisting of
a flashing read light, to one of 16 different noise limits ranging from 45
to 115 dB(A).
Use the red wheel at the bottom of the device to select the desired
noise limit.
Power
24VDC
Noise
Limit
The microphone is located at the bottom
of the sign, ensure that it is not covered
up. Also avoid mounting close to
absorbing materials.
With a power outlet nearby, mount the
sign on the wall using an 8-9mm screw at
a height of 150-200cm. Ensure it is
securely mounted. A VESA mount is also
available for more secure or corner
mounting.
Connect to the power outlet using the
24VDC adapter that is included.
Mounting Point
Displays
Typical Noise Limits
Green
Sign is on
and level is
acceptable
Yellow
Noise level
approaching
the limit
Red
Noise limit
has been
exceeded
No disturbing noise
High concentration level
35-45 dB(A)
Teaching, office or customer service
Unhindered conversation and concentration
45-55 dB(A)
Industrial work without noisy machinery
Storage, mounting and laboratory work
60-70 dB(A)
Day care facilities
Industrial work with noisy machinery
75-85 dB(A)
Concerts, rehearsal rooms
Music schools (short term)
90-105 dB(A)
Contacting NoiseMeters
NoiseMeters Limited
West End
Muston
YO14 0ES
England
Tel: 0845 680 0312
Fax: 0845 680 0316
Email: info@noisemeters.co.uk
Web: www.noisemeters.co.uk
International
Tel: +44 1306 770 855
Fax: +44 845 680 0316
Email: info@noisemeters.com
Web: www.noisemeters.com
Tel: 888 206 4377
Fax: 888 584 2230
Email:
info@noisemeters.com
Web:
www.noisemeters.com
NoiseMeters, Inc.
3233 Coolidge Hwy,
Berkley
MI 48072
USA
United Kingdom North America
© NoiseMeters Limited 2020
SoundEar is a registered
trademark of SoundEar A/S
Specifications
Physical Cabinet: Shockproof acrylic
Measurements: 256 x 205 x 46mm
Weight: 1.5kg
Electrical Power supply: 24VDC, 250mA
Warning: The use of power sources other than the original
SoundEar may cause damage not covered by warranty.
Temperature Operating: 0ºC to 50ºC
Storage: -20ºC to 60ºC
Measurement
Parameters
Frequency: 20Hz to 16kHz
Range: 45 to 115 dB(A)
Frequency Weighting: A
Time Weighting: Slow
Deviation: ±3dB
The product and any enhancements should be taken to
separate collection at the end of life. Do not dispose of this
product as unsorted municipal waste.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

NoiseMeters SoundEar II Noise Activated Warning Sign User manual

SoundEar II Noise Activated Warning Sign
Brand
NoiseMeters
Model
SoundEar II Noise Activated Warning Sign
Type
User manual

NoiseMeters SoundEar II Noise Activated Warning Sign is a device that helps you monitor noise levels and provides a visual warning when the noise limit is exceeded. It has 16 different noise limits ranging from 45 to 115 dB(A), which can be set using the red wheel at the bottom of the device. The sign has a green light for acceptable noise levels, a yellow light for approaching the limit, and a red light for exceeding the limit. It can be mounted on the wall at a height of 150-200 cm and is powered by a 24VDC adapter.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents