2. urban ambiance
  3. UQL4140

urban ambiance UQL4140 Installation guide

  • Hello! I've reviewed the installation instructions for the UQL4140 light fixture. This document outlines the required tools, cautions, parts, and steps for assembly including mounting, wiring, and attaching the bulb and shade. I'm ready to answer any questions you may have about this installation process.
  • What type of bulbs are required for the light fixture?
    Are the bulbs included in the package?
    What should I do if I find missing or damaged parts?
1of3
LightSourceToolsRequired
6 BULBS REQUIRED
NOT INCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Mounting Bracket
x1
A
Package Contents
PARTS BAG
Fixture Body
x1
Mounting Bracket Fixture Body
Table of
Contents
STEP 1 STEP 4
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
STEP 3
E
Outlet Box Screw
x2
C
Wire Connector
x3
D
Shade
x6
G
STEP 2
Level Arm
STEP 5
Bulb & Shade
BULB SHAPE
TYPE G9 XENON
40W
MAX
Lock Screw
x2
BAllen Wrench
x1
H
Installation Instructions: UQL4140
www.urbanambiance.com
2of3
STEP 1
STEP 2 (Optional)
Set Screw
STEP 3
*Green Ground Screw on
crossbar optional
White wire (neutral)
from outlet box White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
www.urbanambiance.com
3of3
STEP 4
STEP 5
www.urbanambiance.com
/