urban ambiance UQL3452 Installation guide

Type
Installation guide
1of3
LightSourceToolsRequired
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
3BULBSREQUIRED
BULBSNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Inner
Backplate
x1
A
Package Contents
PARTS BAG
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1
F
Wiring Shade&Bulb
Table of
Contents
STEP 2 STEP 4
Fixture Body
STEP 3
Mounting
Screw
x4
B
Inner Backplate
STEP 1
Shade (Varies according
to style purchased)
x3
E
Note: Shade shape is for
illustration purpose only.
Your shade shape may vary
from illustration.
Outlet Box Screw
x2
CWire Connector
x3
D
Installation Instructions: UQL3452
www.urbanambiance.com
STEP 1
2of3
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 2
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 3
www.urbanambiance.com
3of3
STEP 4 1 2
Note: Shade shape is for illustration
purpose only. Your shade shape may
vary from illustration.
www.urbanambiance.com
  • Page 1 1
  • Page 2 2
  • Page 3 3

urban ambiance UQL3452 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI