1. SPECIFICATIONS
PCI card with 4 USB 2.0 ports + 1 internal
USB2.0 port
Compliant with
USB
specification revision
2.0
Chipset VIA 6212
Supports high-speed (480 Mbps), full-speed
(12 Mbps), and low-speed (1.5 Mbps) data
transfer modes for simultaneous operation of
multiple USB 2.0/1.1 devices
Works with a various type of USB
devices including hubs, removable drives,
digital cameras, scanner, CD-RWs, DVD-
ROMs, PC video cameras, printers, and
more⁄
Over current protection
Support Windows 98SE/ ME/ 2000/
XP/ Vista/ 7, Linux and MAC OSx
2. PACKAGE CONTENTS
1 x 4-Port USB 2.0 PCI Card 1 x Driver CD 1 x User Manual
3. HARDWARE INSTALLATION
1. Turn Off the computer
2. Unplug the power cord and remove your computerÊs cover.
3. Remove the slot bracket from an available PCI slot.
4. To install the card, carefully align the cardÊs bus connector with the selected
PCI slot on the motherboard. Push the board down firmly.
5. Replace the slot bracketÊs holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
4. DRIVER INSTALLATION
Please make sure the board is installed before proceeding with driver
installation. Windows
®
will automatically detect and install the correct driver.
Make sure that the driver has been installed correctly, right click My Computer,
then click Manage, click Device Manager. Double click Universal Serial Bus
controllers option. It shows the controllers without problems.