aqprox! appUSB300HP User manual

Category
Networking cards
Type
User manual

This manual is also suitable for

appUSB300HP
High-Power Wireless-N USB Adapter
High Gain detachable antenna 1000mW
• Windows 2000 / XP / Vista / W7, Mac OS, Linux
• Puerto USB disponible 2.0 de alta velocidad del puerto
2. CONTENIDO DEL EMBALAJE
2. CONTENIDO DEL EMBALAJE2. CONTENIDO DEL EMBALAJE
2. CONTENIDO DEL EMBALAJE
• Alta Potencia 11n
• Antena de alta ganancia.
• Cable USB 2.0
• Conductor / CD con el manual
3. ESPECIFICACIONES
3. ESPECIFICACIONES3. ESPECIFICACIONES
3. ESPECIFICACIONES
Item
Item Item
Item
Especificaciones
EspecificacionesEspecificaciones
Especificaciones
Estándares IEEE 802.1n, IEEE 802.11g and IEEE
802.11b
Tipo Interfaz USB 2.0/1.1
Date Rate 802.11b: 11Mbps
802.11g: 54 Mbps
802.11n: TX:150Mbps RX:300Mbps
Seguridad 64/128 bit WEP encryption
WPA/WPA2 and WPA-PSK/WPA2-PSK
encryptions
Wi-Fi Protected Setup (WPS)
Frecuencia de
funcionamiento
FCC:2412-2462Mhz (Ch1-Ch11)
ETSI:2412-2472MHz (Ch1-Ch13)
4
1. INTRO
1. INTRO1. INTRO
1. INTRODUCTION AND PRODUCT DESCRIPTION
DUCTION AND PRODUCT DESCRIPTION DUCTION AND PRODUCT DESCRIPTION
DUCTION AND PRODUCT DESCRIPTION
Thank you for choosing the APPUSB300HP Wireless USB Adapter
High Power.
1.1 PRODUCT OVERVIEW
1.1 PRODUCT OVERVIEW 1.1 PRODUCT OVERVIEW
1.1 PRODUCT OVERVIEW
Wireless USB Adapter allows you to connect your laptop or
desktop to any wireless networks in your home or office. The Wireless
USB Adapter is great for those who want to upgrade older computers to
be able to access the Internet over a Wireless network.
1.2.
1.2.1.2.
1.2. PRODUCT FEATURES
PRODUCT FEATURES PRODUCT FEATURES
PRODUCT FEATURES
Standards IEEE 802.11n, IEEE 802.11.b and IEEE 802.11g.
Chipset Ralink RT2720+2770
TX: 150 Mbps RX: 300Mbps.
64/128 WEP, WPA/WPA2 and WPA-PSK/WPA2-PSK encryptions.
Wi-Fi Protected Setup (WPS).
1000mW via USB 2.0
4 PCB Layer, with 1 x detachable 5dbi antenna.
Support Software AP mode and WMMTM (Wi-Fi Multimedia)
function.
Operating distance of up to 1000 meters
Compatible with USB 1.1 desktop and notebook computers.
Support Wireless Data gathering and analyzing.
Windows 98SE, 2000, Millennium, XP, Vista, W7, Linux and MAC
OS X.
11
High power in compact size
Constant and stable performance
User-friendly and easy installation
1.3
1.31.3
1.3
PC SYSTEM REQUERIMENTS
PC SYSTEM REQUERIMENTSPC SYSTEM REQUERIMENTS
PC SYSTEM REQUERIMENTS
Notebook or desktop PC with Pentium 1 GHz-compatible or higher
processor
Windows 2000/ XP/ Vista/ W7, Mac OS, Linux
Available Hi-Speed USB 2.0 Port
2. PACKAGE CONTENTS
2. PACKAGE CONTENTS2. PACKAGE CONTENTS
2. PACKAGE CONTENTS
11n High Power
High gain Antenna.
USB 2.0 Cable
Driver/Manual CD
3. SPECIFICATIONS
3. SPECIFICATIONS3. SPECIFICATIONS
3. SPECIFICATIONS
Item
Item Item
Item
Specifications
SpecificationsSpecifications
Specifications
Standards IEEE 802.1n, IEEE 802.11g and IEEE
802.11b
Interface Type USB 2.0/1.1
12
Date Rate 802.11b: 11Mbps
802.11g: 54 Mbps
802.11n: TX:150Mbps RX:300Mbps
Security 64/128 bit WEP encryption
WPA/WPA2 and WPA-PSK/WPA2-PSK
encryptions
Wi-Fi Protected Setup (WPS)
OPERATING
FRECUENCY
FCC:2412-2462Mhz (Ch1-Ch11)
ETSI:2412-2472MHz (Ch1-Ch13)
RF Frequency 2412~2462 MHz (North America)
2412~2472 MHz (Europe)
2412~2482 MHz (Japan)
Antenna Type Internal PCB Antenna + High gain Antenna
LED Status Link Status, Activity
Operable
Environments
Operating Temperature: 0ÀC~40ÀC
Storage Temperature: -20ÀC~60ÀC
Operating Humidity: 10%~85% RH
13
non_condensing
Storage Humidity: 5% to 90% RH non-
condensing
Supported OS Windows 2000, XP, Vista, W7, Linux and
MAC OS X
4. INSTALATION GUIDE
4. INSTALATION GUIDE 4. INSTALATION GUIDE
4. INSTALATION GUIDE
IMPORTANT: For proper operation, do not connect the Wireless
USB Adapter to your computer before you install the software. If you do,
wait for the Found New Hardware screen to display and click „Cancel‰;
otherwise, the installation process will likely be adversely affected.
Insert the included setup CD
in the CD-ROM Drive and start the
Setup.exe program. To start the
installation, please click on the
„USB 802.11G Adapter‰ or
„USB802.11N Adapter‰.
Wait for the installer to run when the License Agreement screen
displays, read the agreement and click „Next‰ to accept the terms and
continue with the installation.
14
On the second Setup Type Screen (below), choose a configuration
tool. „Ralink Configuration Tool‰ is recommended, as it provides access
to all adapter features.
If you prefer to use the tool
provided by Windows XP/ Vista,
select „Microsoft Zero
Configuration Tool‰. Choose either
(the setting can be changer after
the install), then click „Next‰.
The installer will
automatically install the program.
When done, select „Yes, I want to
restart my computer now‰ and
click „Finish‰ to reboot your
computer.
15
With the computer now turned on, insert the
Wireless USB Adapter into an open USB2.0 port.
With the Welcome to the
Found New Hardware Wizard
screen displayed (which is
automatic when the adapter is
connected to the computer),
select the option „No, not this
time‰ and click „Next‰.
When prompted with „What do
you want the wizard to do?‰ select
„Install the software automatically
(Recommended)‰ and click „Next‰.
A status screen will display,
indicating that the installation is in
progress. No action is needed as
this point.
16
When the Completing the Found New Hardware Wizard screen
displays, it indicates that the installation has been successfully
completed and your Wireless USB Adapter is ready for configuration.
5. CONFIGURATION GUIDE
5. CONFIGURATION GUIDE 5. CONFIGURATION GUIDE
5. CONFIGURATION GUIDE
Once the installation is complete, you can configure the Wireless
USB Adapter to connect to a wireless access point (AP). The wireless
configuration utility will start automatically, and youÊll also find a tray
icon at the lower right in your Windows systemÊs tray.
1. Right-click the RaUI icon and select „Launch Config Utility‰.
2. The configuration utility will scan for wireless networks within
range. Click Rescan‰ to refresh the list of available wireless
networks. To join a particular network that displays, select it
and click „Connect‰.
3. If the wireless network uses encryption, you need to input the
correct encryption key. The configuration utility automatically
suggests the correct authentication type (see the drop-down
list), and you should not change the suggested value.
17
4. NOTE: For WPA/ WPA2 networks, you need to select the
correct encryption type, as well (AES or TKIP). These settings
depend on how the wireless network is set up. Only the
owner of the wireless network can provide the required
information.
5. If the wireless access point is successfully connected, you
will see ► in front of the wireless device.
NOTE: For advanced settings and additional features of the Wireless
USB Adapter, refer to the user manual on the enclosed CD.
6.
6. 6.
6. OBTAINING TECHNICAL SUPPORT
OBTAINING TECHNICAL SUPPORTOBTAINING TECHNICAL SUPPORT
OBTAINING TECHNICAL SUPPORT
While we hope your experience with the Wireless-N USB Adapter is
enjoyable and easy to use, you may experience some difficulties or have
some questions that this User Guide has not answered. Please contact
your reseller and ask them for help first. If they cannot resolve your
issue, please contact our company.
This user manual is based on the latest version of our Wireless-N
USB Adapter.
If your USB adapter does support some special functions showed
in the manual, please contact our technical support team to obtain the
latest software for doing upgrade.
18
Tipo di interfaccia USB 2.0/1.1
Velocità dati 802.11b: 11Mbps
802,11g: 54 Mbps
802.11b: TX:150Mbps RX:300Mbps
Protezione Crittografia WEP 64/128 bit
Crittografie WPA/WPA2 e WPA-
PSK/WPA2-PSK
Wi-Fi Protected Setup (WPS)
FREQUENZA DI
FUNZIONAMENTO
FCC: 2412 2462Mhz (Ch1-CH11)
ETSI: 2412 -2472MHz (Ch1-CH13)
Frequenza RF 2412 ~ 2462 MHz (Stati Uniti)
2412 ~ 2472 MHz (Europa)
2412 ~ 2482 MHz (Giappone)
Tipo di antenna Antenna PCB interna + antenna high
gain
Stato LED Stato Link, attività
Operabile
Ambiente
Temperatura di funzionamento:
0ÀC~40ÀC
Temperatura magazzinaggio: -
20ÀC~60ÀC
Umidità di funzionamento: 10%~85%
37
www.printyourideas.com
Importado por / Imported by:
APPROX IBERIA S. L.
CIF: B-91202499
Soporte técnico / Technical support:
MADE IN CHINA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51

aqprox! appUSB300HP User manual

Category
Networking cards
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI