Digicom Hub USB User manual

Category
Interface hubs
Type
User manual
NETWORKING
For further information: [email protected] or http://www.digicom.it
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. All other brands, products and trademarks are property of their respective o
wners.
Ports
1 upstream port (root port) for computer
connection
4 downstream ports for peripherals
connection
2 porte SCSI ad alta velocità per
espansione fino a 6 unità.
Functionalities
Plug & Play
Up to 127 devices supported
Operating at 1,5Mbps and 12Mbps
Power Supply
Powered by the computer USB port
(self-powered) or through external
power supply
Power supply: +5VDC, 500 mA for each
port
Led Indicators
Powered by USB bus/by external power
supply
Downstream ports enabled
Overcurrent protection
Minimum requirements
Windows® ME, 2000, 98
Mac®OS 8.6 or higher
Software and Hardware USB supported
and installed
Conformity
CE Mark
Hub USB 01.09.2004
DESCRIPTION
Just add 4 USB devices to your computer!
Hub USB can manage up to 127 devices and has
overcurrent protection on each port.
It can operate with peripherals at 12Mbps and
1,5Mbps.
It is powered by the USB port or through the external
power supply, in the package, and it guarantees up to
500mA for each port.
Each port has a current limiter that protects your
computer, the hub and the connected peripherals from
overcurrent damages.
Hub USB is Plug & Play and is fully compliant with
USB specifications.
It can operate with Windows® and Macitnosh®
operating systems.
No driver or setup is required.
Hub USB
Code: 8E4059
  • Page 1 1

Digicom Hub USB User manual

Category
Interface hubs
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI