2. Danfoss
  3. Oil separator, type OUB

Danfoss Oil separator, type OUB Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss Oil separator, type OUB Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
-40 – 120 °C (248 °F)
KP15
OUB
SGI
Max. 150 °C (300 °F)
Max. 700 °C (1300 °F)
15% Ag
Max. 700 °C
(1300 °F)
15% Ag
Refrigerants:
R22, DR55*, R1234ze*, R1270*, R1290*, R134a, R290*, R32*, R404A, R407A, R407C, R407F,
R438A, R448A, R449A, R450A, R452A, R454B*, R507A, R513A, R600*, R600a*
OUB 1 is compliant with ATEX hazard zone 2
For complete list of approved refrigerants, visit www.products.danfoss.com and search for individual code numbers, where refrigerants are listed as part of technical data.
*) OUB 1 only
Recommended tightening torque of unions:
OUB 1: 40 Nm
OUB 4: 90 Nm
Max. working pressure:
PS/MWP = 28 bar/406 psig
Installation guide
Oil separator
Type OUB
040R9573
040R9573
© Danfoss | DCS (rja) | 2016.11
DKRCC.PI.FC0.A4.02 | 1
/