Con-Tact 04F-C7L04-04 User guide

Type
User guide

This manual is also suitable for

La Mirada, CA tel. 714-736-1000 fax. 714-736-2078 customer service. 800-321-1741 email. [email protected]
CON-TACT LINER
EMBOSSED SOLID GRIP
Non-Adhesive
SURFACE PREPARATION
Clean surfaces prior to application as necessary.
All surfaces should be dry, clean, and smooth.
CAUTION
Not for use on lacquered or urethane surfaces. Finish damage may occur.
Care should be taken when placed on latex semi-gloss and gloss paints.
Painted areas must be completely cured otherwise the liner may stick to the surface.
Cool and/or humid conditions required a longer curing time.
APPLICATION
Measure area to be covered
Cut to desired size and/or shape
CLEANING AND MAINTENANCE
Washable
Clean with a damp cloth and mild soap if necessary
May be submerged in water with mild soap or detergent
Hand wash
Machine Wash, Gentle or Delicate cycle with mild soap or detergent
Do Not Wring
Machine dryer should not be used.
Lay flat to dry
  • Page 1 1

Con-Tact 04F-C7L04-04 User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI