Extech Instruments AUT-TL User manual

Brand: Extech Instruments

Model: AUT-TL

Type: User manual

This manual is also suitable for

AUT-TLM

Extech Instruments AUT-TLM is an Automotive Fuse Adaptor that allows the user to check automotive current up to 20A without breaking the circuit. It works with any multimeter that offers a 20A current input. The AUT-TLM has a measuring range up to 20A/48VDC and a resolution of 0.1A. It comes with an 80cm (2.6 ft.) connector cable with standard shrouded right-angle banana plugs, a blade connector, and a fuse jack. The AUT-TLM is easy to use. Connect the two shrouded right-angle banana jack test leads to any multimeter that offers a 20A current input.

USER GUIDE

AUTTL/AUTTLM-EU-EN V1.1 07/13

ModelAUT‐TL/AUT‐TLM

AutomotiveFuseAdaptor



Features

• 80cm(2.6ft.)connectorcablewithstandard shrouded

rightanglebananaplugs(1)

• Bladeconnector(3)

• Fusejack(2)

• Measuringrangeupto20A/48VDC

• TheAUT‐TLworkswiththeATCsizedfuses,whereasthe

AUT‐TLMworkswithmini‐sizedfuses.



Safety

WARNING:RiskofElectrocution.Keephandsandfingerson

thebodyoftheconnectorandawayfromtheprobetips

CAUTION:Read,understandandfollowSafetyRulesand

OperatingInstructionsinthismanualbeforeusingthis

product.

Donotattempttorepairthisunit.Therearenouser

serviceableparts.



Donotexposetheunittoextremetemperaturesorhigh

humidity

Donotusetheunitifitiswetordamaged

Donotapplymorethantheratedvoltagetotheconnector



Thissymbol,adjacenttoanothersymbolorterminal,

indicatestheusertheusermustrefertothe

manual

forfurtherinformation.



Thissymbol,adjacenttoaterminal,indicatesthat,

undernormaluse,hazardousvoltagesmaybepresent



Doubleinsulation



Specifications

Range 0to20A,48VDC

OperatingTemp. 0to50

C(32to122

F)

StorageTemp. ‐20to60

C(‐4to140

F)

Altitude 2000m(7000ft.)maximum

RelativeHumidity 80%upto31

C,decreasingto50%at50

C

Dimensions 112x45x33mm(4.4”x1.8”x1.3")

Weight 165g(0.4lbs)

Resolution 0.1A



OperatingInstructions

The AUT‐TL / AUT‐TLM in combination with a standard

Multimeterallowstheusertocheckautomotivecurrentupto

20Awithoutbreakingthecircuit.

1. Connectthetwoshroudedright‐anglebananajacktest

leads(1)toanyMultimeterthatoffersa20Acurrent

input.

2. Ensurethatthe

vehicle’signitionisintheOFFposition.

3. Removethe fuseorminifuseforthecircuitundertest

fromthevehicle’sfuseboxandcarefullysetitaside.

4. Plugthebladeconnector(3)directlyintothefusebox

jackwherethefusewasremoved.

5. Connecttheremovedfusetothefusejack(2)onthe

sideoftheconnector.

6. Turnthevehicle’ signitionONandrunthecircuitunder

testfor10secondsmaximum.

7. ReadthecurrentvalueontheMultimeter’sdisplay.



Warranty

FLIR Systems, Inc. warrants this Extech Instruments brand device to be free of

defects in parts and workmanship for one year from date of shipment (a six

month limited warranty applies to sensors and cables). If it should become

necessary to return the instrument for service during or beyond the warranty



period, contact the Customer Service Department for authorization. Visit the

website www.extech.com for contact information. A Return Authorization (RA)

numbermustbeissuedbeforeanyproductisreturned.Thesenderisresponsible

forshippingcharges,freight,insuranceandproperpackagingtopreventdamage

in transit. This warranty does not apply to defects resulting from  action of the

user such as misuse, improper wiring, operation outside of specification,

impropermaintenanceor

repair,orunauthorizedmodification.FLIRSystems,Inc.

specifically disclaims any implied warranties or merchantability or fitness for a

specific purpose and will not be liable for any direct, indirect, incidental or

consequentialdamages.FLIR’stotalliabilityislimitedtorepairorreplacementof

the product.  The warranty set forth above

is inclusive and no other warranty,

whetherwrittenororal,isexpressedorimplied.



Calibration,Repair,&CustomerCare

FLIR Systems, Inc. offers repair and calibration services for the Extech

Instruments products we sell. NIST certification for most products is also

provided. Call the Customer Service Department for information on calibration

services available for this product. Annual calibrations should be performed to

verifymeterperformanceandaccuracy.Technicalsupportand

generalcustomer

serviceisalsoprovided,ref ertothecontactinformationprovidedbelow.



Allrightsreservedincludingtherightofreproductioninwholeorinpartinanyform

www.extech.com

Support Lines:U.S.(877)439‐8324

International:+1(603)324‐7800

TechnicalSupport:Option3;E‐mail:[email protected]

Repair&Returns:Option4;E‐mail:repair@extech.com

Productspecificationsaresubjecttochangewithoutnotice

Pleasevisitourwebsiteforthemostup‐to‐dateinformation

www.extech.com

FLIRCommercialSystems,Inc.,9TownsendWest,Nashua,NH03063USA

ISO9001Certified

Extech Instruments AUT-TL User manual

Brand: Extech Instruments

Model: AUT-TL

Type: User manual

This manual is also suitable for

AUT-TLM

Download PDF

report

Extech Instruments AUT-TL User manual

This manual is also suitable for

Extech Instruments AUT-TL User manual

Related papers

Other documents