PVI Industries 250N600A-TPO User manual

PVI Industries
Brand
PVI Industries
Model
250N600A-TPO
Type
User manual

PVI Industries 250N600A-TPO is a packaged water heater with a Polyshield polymer-lined storage tank, designed to provide hot water for residential and commercial applications. With a 600-gallon tank, it offers a recovery rate of up to 250 gallons per hour, ensuring a consistent supply of hot water even during peak demand.

The 250N600A-TPO features an energy-efficient design, meeting ASHRAE 90.1 standards for efficiency and standby loss. Its advanced insulation system minimizes heat loss, reducing operating costs and improving overall performance.

The unit is equipped with a 1/3 HP blower motor, providing ample airflow for efficient combustion. It operates on #2 oil with an input of 199,000 Btu/h, delivering a reliable and cost-effective heating solution.

PVI Industries 250N600A-TPO is a packaged water heater with a Polyshield polymer-lined storage tank, designed to provide hot water for residential and commercial applications. With a 600-gallon tank, it offers a recovery rate of up to 250 gallons per hour, ensuring a consistent supply of hot water even during peak demand.

The 250N600A-TPO features an energy-efficient design, meeting ASHRAE 90.1 standards for efficiency and standby loss. Its advanced insulation system minimizes heat loss, reducing operating costs and improving overall performance.

The unit is equipped with a 1/3 HP blower motor, providing ample airflow for efficient combustion. It operates on #2 oil with an input of 199,000 Btu/h, delivering a reliable and cost-effective heating solution.

Recoveries based on 83% thermal efficiency. ASHRAE 90.1 compliant for efficiency and standby loss.
"J" dimension is for the burner housing only.
Dimensions are in inches unless otherwise specified.
For standard and optional equipment, see form PV 6006.
Model
Number
Recovery gph
Input
Btu/h
Dimensions (inches)
Blower
Motor
Shipping
Weight
lbs
40°- 120°F 40°- 140°F A B J HP
Volt/Ph/
Amps
250 P 600A-TPO 250 200 199,000 28 4 17 1/3
115/1∅/8
2270
500 P 600A-TPO 500 400 399,000 28 5 17 1/2
115/1∅/10
2290
750 P 600A-TPO 750 600 600,000 31 6 17 1/2
115/1∅/10
2370
1000 P 600A-TPO 1000 800 800,000 31 8 17 1/2
115/1∅/10
2410
1250 P 600A-TPO 1250 1000 1,000,000 39 8 17 1/2
115/1∅/10
2650
1500 P 600A-TPO 1500 1200 1,200,000 39 8 17 1/2
115/1∅/10
2660
Gph
#2 Oil
1.4
2.8
4.3
5.7
7.2
8.6
2000 P 600A-TPO 2000 1600 1,600,000 11.4 51 10 25 1-1/2
115/1∅/20
3100
2500 P 600A-TPO 2500 2000 2,000,000 14.3 51 10 25 1-1/2
115/1∅/20
3120
3000 P 600A-TPO 3000 2400 2,400,000 17.1 53 12 25 1-1/2
115/1∅/20
3130
3500 P 600A-TPO 3500 2800 2,800,000 20.0 53 12 25 5
230/3∅/16
3160
4000 P 600A-TPO 4000 3200 3,200,000 22.8 53 12 25 5
230/3∅/16
3210
K
41
41
41
41
41
41
41
41
51
51
51
TURBOPOWER
®
OIL PACKAGED WATER HEATER
POLYSHIELD
®
POLYMER-LINED STORAGE TANK
TANK SERIES 600 GALLONS
PV 5440 04/05
PVI INDUSTRIES, LLC
FORT WORTH, TEXAS 76111
(800) 784-8326
(817) 335-9531 www.pvi.com
Product is patented in the U.S., Canada, and Mexico.
VENTING REQUIREMENTS
-.02" TO -.06" W.C. (NEGATIVE PRESSURE)
ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED
UPON THE VENT CONNECTION DIAMETER EXCLUSIVELY.
FOR PROPER SIZING, CONSULT VENTING SUPPLIER.
STANDARD ELECTRICAL REQUIREMENTS
CONTROL VOLTAGE: 120V, 1Ø, 60 HZ., 2 AMPS.
MOTOR VOLTAGE:
208V, 230V, AND 460V MOTORS ARE AVAILABLE BUT WILL
REQUIRE A SEPARATE 120V/2 amps CONTROL CIRCUIT OR AN
OPTIONAL CONTROL CIRCUIT TRANSFORMER.
PVI RESERVES THE RIGHT TO CHANGE THE DESIGN
AND SPECIFICATION WITHOUT NOTICE.
* REAR ACCESS MODULE
MODEL PREFIX M L STD or OPTIONAL
250-1500 23" 8" OPTIONAL
2000-2500 23" 16" STANDARD
3000-4000 30" 18" STANDARD
  • Page 1 1

PVI Industries 250N600A-TPO User manual

PVI Industries
Brand
PVI Industries
Model
250N600A-TPO
Type
User manual

PVI Industries 250N600A-TPO is a packaged water heater with a Polyshield polymer-lined storage tank, designed to provide hot water for residential and commercial applications. With a 600-gallon tank, it offers a recovery rate of up to 250 gallons per hour, ensuring a consistent supply of hot water even during peak demand.

The 250N600A-TPO features an energy-efficient design, meeting ASHRAE 90.1 standards for efficiency and standby loss. Its advanced insulation system minimizes heat loss, reducing operating costs and improving overall performance.

The unit is equipped with a 1/3 HP blower motor, providing ample airflow for efficient combustion. It operates on #2 oil with an input of 199,000 Btu/h, delivering a reliable and cost-effective heating solution.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents