PVI Industries 500 N 225A-TPO User manual

Brand: PVI Industries

Model: 500 N 225A-TPO

Type: User manual

 Recoveries based on 83% thermal efficiency. ASHRAE 90.1 compliant for efficiency and standby loss.

 "J" dimension is for the burner housing only.

Dimensions are in inches unless otherwise specified.

For standard and optional equipment, see form PV 6004.

Model

Number

Recovery gph 

Input

Btu/h

Gph

#2 Oil

Dimensions

(inches)

Blower

Motor

Shipping

Weight

lbs

40°- 120°F 40°- 140°F A B J  HP Volt/Ph/Amps

250 N 225A-TPO 250 200 199,000 1.4 28 4 17 1/3

115/1∅/8

1380

500 N 225A-TPO 500 400 399,000 2.8 28 5 17 1/2

115/1∅/10

1400

750 N 225A-TPO 750 600 600,000 4.3 42 6 17 1/2

115/1∅/10

1480

1000 N 225A-TPO 1000 800 800,000 5.7 42 8 17 1/2

115/1∅/10

1520

TURBOPOWER

OIL  PACKAGED WATER HEATER

NICKELSHIELD

NICKEL-PLATED STORAGE TANK

TANK SERIES 225 GALLONS

PV 5359 04/05

PVI INDUSTRIES, LLC

FORT WORTH, TEXAS 76111

(800) 784-8326

 (817) 335-9531  www.pvi.com

Product is patented in the U.S., Canada, and Mexico.

VENTING REQUIREMENTS

-.02" TO -.06" W.C. (NEGATIVE PRESSURE)

ENTIRE VENT SYSTEM SHOULD NEVER BE SIZED BASED

UPON THE VENT CONNECTION DIAMETER EXCLUSIVELY.

FOR PROPER SIZING, CONSULT VENTING SUPPLIER.

STANDARD ELECTRICAL REQUIREMENTS

CONTROL VOLTAGE: 120V, 1Ø, 60 HZ., 2 AMPS.

MOTOR VOLTAGE:

208V, 230V, AND 460V MOTORS ARE AVAILABLE BUT WILL

REQUIRE A SEPARATE 120V/2 amps CONTROL CIRCUIT OR

AN OPTIONAL CONTROL CIRCUIT TRANSFORMER.

PVI RESERVES THE RIGHT TO CHANGE THE DESIGN

AND SPECIFICATION WITHOUT NOTICE.

PVI Industries 500 N 225A-TPO User manual

PVI Industries 500 N 225A-TPO User manual

PVI Industries 500 N 225A-TPO User manual

Related papers

Other documents