Technical Support
If you need any assistance to get your unit functioning properly, please
have your product information ready and contact Addonics Technical
Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
T E C H N O L O G I E S
www.addonics.com
User Guide
BD/DVD/CD Tower IX
(ST9BDVES)
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Unpacking and Overview
1
2
3
6
45
Power Cord (U.S. Version Shown)
WARNING: Please remember to
set the power supply to your local
outlet voltage prior to plugging in
the power cord. Failure to do so
may damage the power supply.
eSATA Cable x2
Front View
Back View
7
8
9
1. Array 1
2. Array 2
3. Front Power Button
4. Power LED
5. Drive Activity LED
6. Array 1
7. Array 2
8. Power Connector
9. Rear Power Switch
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Port Multiplier Compatibility
The Port Multiplier in this unit will only work with a Port Multiplier aware
SATA host adapter. Identify your host controller and check with its
hardware manufacturer if you are unsure. Addonics offers several Port
Multiplier aware host adapters.
Installation
Step 1. Connect eSATA cable from Array 1 and 2 to two connectors from
computer.
Step 2. Connect the power cord to a wall outlet.
Step 3. Turn ON the rear power switch.
Step 4. Press the Front Power Button.
www.addonics.com
Phone: 408-573-8580
Fax: 408-573-8588
Email: http://www.addonics.com/sales/query/
CONTACT US
/
