PROLiNK PRT7011L-B Battery Indicator Improvement
Jan 20 v1.0
Improvement Description:
PRT7011L-B battery life is improved with the following changes in the power life indicators.
LED Power %
BLUE 100% - 40%
AMBER 39% - 10%
RED 9% - 1%
Kindly follow the below steps to update the MIFI firmware.
(i) Download the firmware (PRT7011LB_1.02.zip) from our support website. DO NOT require to unzip
the file.
https://prolink2u.com/product/prt7011l/#tab_download
(ii) Plug in the USB cable from the MIFI to the computer USB port, install the driver (if not yet installed)
from My PC > Right click the “CD Drive” and install the driver.
(iii) Open the web browser and type in http://192.168.1.1 > enter Username: admin; Password:
password > System > Firmware Upgrade > Upgrade Router: Manual > File Name: browse to the
downloaded firmware (PRT7011LB_1.02.zip) location > Update
(iv) DO NOT UNPLUG THE USB CABLE DURING THE UPDATING PROCESS.
The whole process will take around 3 to 4 mins.
(v) After the upgrading is done, login again when prompt, and go to Configuration > Reset
(vi) The new firmware version v1.02 will be shown under System > About
P/S: The mentioned firmware is only for PRT7011L-B version. You can check the version from the MIFI serial number
sticker for example as shown.
/