Aaeon BOXER-6404 User manual

Type
User manual

Aaeon BOXER-6404 is an embedded Box PC supporting the 6th/7th Generation Intel® Core™ i7/i5/i3 LGA1151 Socket Type processors and the Intel® H110 Chipset. It can carry up to 16GB of DDR3L SO-DIMM and comes with four USB 3.0 ports, four USB 2.0 ports, two HDMI ports, two COM ports, and four LAN (RJ-45) ports, supporting different expansion and application scenarios, making it an ideal choice for applications such as industrial automation, digital signage, and POS/KIOSK systems.

Aaeon BOXER-6404 is an embedded Box PC supporting the 6th/7th Generation Intel® Core™ i7/i5/i3 LGA1151 Socket Type processors and the Intel® H110 Chipset. It can carry up to 16GB of DDR3L SO-DIMM and comes with four USB 3.0 ports, four USB 2.0 ports, two HDMI ports, two COM ports, and four LAN (RJ-45) ports, supporting different expansion and application scenarios, making it an ideal choice for applications such as industrial automation, digital signage, and POS/KIOSK systems.

Last Updated: February 11, 2019
BOXER-6404
Embedded Box PC
Users Manual 4
th
Ed
Preface II
Embedded Box
PC
BOXER
-
6404
Copyright Notice
This document is copyrighted, 2019. All rights are reserved. The original manufacturer
reserves the right to make improvements to the products described in this manual at
any time without notice.
No part of this manual may be reproduced, copied, translated, or transmitted in any
form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate and
reliable. However, the original manufacturer assumes no responsibility for its use, or for
any infringements upon the rights of third parties that may result from its use.
The material in this document is for product information only and is subject to change
without notice. While reasonable efforts have been made in the preparation of this
document to assure its accuracy, AAEON assumes no liabilities resulting from errors or
omissions in this document, or from the use of the information contained herein.
AAEON reserves the right to make changes in the product design without notice to its
users.
Preface III
Embedded Box
PC
BOXER
-
6404
Acknowledgement
All other products’ name or trademarks are properties of their respective owners.
Microsoft Windows
®
is a registered trademark of Microsoft Corp.
ITE is a trademark of Integrated Technology Express, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines
Corporation.
All other product names or trademarks are properties of their respective owners.
Preface IV
Embedded Box
PC
BOXER
-
6404
Packing List
Before setting up your product, please make sure the following items have been
shipped:
Item
Quantity
BOXER-6404
1
Power Adapter
1
Product DVD with Users Manual (in pdf) and drivers
1
If any of these items are missing or damaged, please contact your distributor or sales
representative immediately.
Preface V
Embedded Box
PC
BOXER
-
6404
About this Document
This User’s Manual contains all the essential information, such as detailed descriptions
and explanations on the product’s hardware and software features (if any), its
specifications, dimensions, jumper/connector settings/definitions, and driver
installation instructions (if any), to facilitate users in setting up their product.
Users may refer to the AAEON.com for the latest version of this document.
Preface VI
Embedded Box
PC
BOXER
-
6404
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this
manual for future references
1. All cautions and warnings on the device should be noted.
2. Make sure the power source matches the power rating of the device.
3. Position the power cord so that people cannot step on it. Do not place anything
over the power cord.
4. Always completely disconnect the power before working on the systems
hardware.
5. No connections should be made when the system is powered as a sudden rush
of power may damage sensitive electronic components.
6. If the device is not to be used for a long time, disconnect it from the power
supply to avoid damage by transient over-voltage.
7. Always disconnect this device from any AC supply before cleaning.
8. While cleaning, use a damp cloth instead of liquid or spray detergents.
9. Make sure the device is installed near a power outlet and is easily accessible.
10. Keep this device away from humidity.
11. Place the device on a solid surface during installation to prevent falls
12. Do not cover the openings on the device to ensure optimal heat dissipation.
13. Watch out for high temperatures when the system is running.
14. Do not touch the heat sink or heat spreader when the system is running
15. Never pour any liquid into the openings. This could cause fire or electric shock.
16. As most electronic components are sensitive to static electrical charge, be sure
to ground yourself to prevent static charge when installing the internal
components. Use a grounding wrist strap and contain all electronic components
in any static-shielded containers.
Preface VII
Embedded Box
PC
BOXER
-
6404
17. If any of the following situations arises, please the contact our service personnel:
i. Damaged power cord or plug
ii. Liquid intrusion to the device
iii. Exposure to moisture
iv. Device is not working as expected or in a manner as described in
this manual
v. The device is dropped or damaged
vi. Any obvious signs of damage displayed on the device
18. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WHERE
THE STORAGE TEMPERATURE IS BELOW -20° C (-4°F) OR ABOVE 60°C (140°F)
TO PREVENT DAMAGE.
Preface VIII
Embedded Box
PC
BOXER
-
6404
FCC Statement
This device complies with Part 15 FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept
any interference received including interference that may
cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions and your local government’s recycling or
disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le
constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et
les directives gouvernementales de recyclage.
Preface IX
Embedded Box
PC
BOXER
-
6404
China RoHS Requirements (CN)
产品中有毒有害物质或元素名称及含
AAEON Embedded Box PC/ Industrial System
部件名称
有毒有害物质或元素
(Hg)
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯
(PBDE)
印刷电路
及其电子组件
外部信号
连接器及线材
外壳
中央处理
与内存
硬盘
电源
O:表示该有毒有害物质在该部件所有均质材料中的含量均
SJ/T 11363-2006 标准规定的限量要求以下。
X:表示该有毒有害物质至少在该部件的一均质材料中的含量超
SJ/T 11363-2006 标准规定的限量要求
备注:
一、此产品所标示之环保使用期限,系指在一般正常使用状下。
二、上述部件物质中央处理器、内存、硬盘、电源为选购品
Preface X
Embedded Box
PC
BOXER
-
6404
China RoHS Requirement (EN)
Poisonous or Hazardous Substances or Elements in Products
AAEON Embedded Box PC/ Industrial System
Component
Poisonous or Hazardous Substances or Elements
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
Biphenyls
(PBB)
Polybrominated
Diphenyl Ethers
(PBDE)
PCB & Other
Components
×
Wires &
Connectors
for External
Connections
×
Chassis
×
CPU & RAM
×
Hard Disk
×
PSU
×
OThe quantity of poisonous or hazardous substances or elements found in each of the
component's parts is below the SJ/T 11363-2006-stipulated requirement.
X: The quantity of poisonous or hazardous substances or elements found in at least one of the
component's parts is beyond the SJ/T 11363-2006-stipulated requirement.
Note: The Environment Friendly Use Period as labeled on this product is applicable under normal
usage only
Preface XI
Embedded Box
PC
BOXER
-
6404
Table of Contents
Chapter 1 - Product Specifications .........................................................................................1
1.1 Specifications .................................................................................................................. 2
Chapter 2 Hardware Information ....................................................................................... 4
2.1 Dimensions ...................................................................................................................... 5
2.2 List of Jumpers ................................................................................................................ 6
2.2.1 Clear CMOS Jumper (JP12, pin 1,3,5)....................................................... 7
2.2.2 Auto Power Button Enable/ Disable Selection (JP12, pin 2,4,6) ...... 7
2.2.3 Push Power Button with Orange LED (SW1) ......................................... 7
2.3 List of Connectors .......................................................................................................... 8
2.3.1 COM Port RS-232 (CN1) .............................................................................. 9
2.3.2 +12 V Input (CN2) ......................................................................................... 9
2.3.3 LAN (RJ-45) Port 1,2,3,4 (JP3,4,5,6) ......................................................... 10
2.3.4 +5 V Output for SATA HDD (CN7) .......................................................... 10
2.3.5 SATA Port (CN8) ............................................................................................ 11
2.3.6 DDR3L SO-DIMM Slot (CN9) .................................................................... 11
2.3.7 C-FAST Card Connector (CN11)................................................................ 11
2.3.8 MiniCard Slot (CN13) (USB Port2 Only) ................................................. 12
2.3.9 Battery (CN14) ............................................................................................... 14
2.3.10 USB 3.0 Port 0 (CN17) ................................................................................. 15
2.3.11 USB 2.0 Port 1, 3 (CN18,19) ........................................................................ 15
2.3.12 HDMI Port 1, 2 (CN20,21) ........................................................................... 16
2.3.13 LPC Port (CN22) ............................................................................................ 17
2.3.14 SPI Programming Header (CN23) ........................................................... 17
2.5 Installing DRAM ............................................................................................................. 19
Chapter 3 - AMI BIOS Setup ................................................................................................ 21
3.1 System Test and Initialization ................................................................................... 22
Preface XII
Embedded Box
PC
BOXER
-
6404
3.2 AMI BIOS Setup............................................................................................................ 23
3.3 Setup Submenu: Main................................................................................................ 24
3.4 Setup Submenu: Advanced ...................................................................................... 25
3.4.1 Advanced: ACPI Settings ........................................................................... 26
3.4.2 Advanced: F81801 Super IO Configuration ......................................... 28
3.4.2.1 Super IO Configuration: Serial Port 1 Configuration ............ 29
3.4.3 Advanced: H/W Monitor ........................................................................... 30
3.4.4 Advanced: CPU Configuration ................................................................. 31
3.4.4.1 CPU Configuration: Socket 0 CPU Information ..................... 32
3.4.5 Advanced: SATA Configuration ............................................................... 33
3.4.6 Advanced: USB Configuration ................................................................. 35
3.5 Setup submenu: Chipset ........................................................................................... 37
3.5.1 Chipset: North Bridge ................................................................................ 38
3.5.2 Chipset: South Bridge ................................................................................ 39
3.5.2.1 South Bridge: USB Configuration (Default Setting) .............. 40
3.6 Security............................................................................................................................. 41
3.7 Setup submenu: Boot................................................................................................. 42
3.8 Setup submenu: Save & Exit .................................................................................... 43
Chapter 4 Drivers Installation ...........................................................................................44
4.1 Product CD/DVD ......................................................................................................... 45
Appendix A - Watchdog Timer Programming................................................................... 47
A.1 Watchdog Timer Initial Program............................................................................. 48
A.2 Watchdog Sample Program ..................................................................................... 49
Appendix B - I/O Information .............................................................................................. 52
B.1 I/O Address Map ......................................................................................................... 53
B.2 Memory Address Map ............................................................................................... 55
B.3 IRQ Mapping Chart..................................................................................................... 56
Appendix C Electrical Specifications for I/O Ports .......................................................... 67
Preface XIII
Embedded Box
PC
BOXER
-
6404
C.1 Electrical Specifications for I/O Ports ..................................................................... 68
Embedded Box PC
BOXER
-
6404
Chapter 1
Chapter 1 - Product Specifications
Chapter 1 Product Specifications 2
Embedded Box PC
BOXER
-
6404
1.1 Specifications
System
CPU
Intel® Celeron™ J1900, 2.0 GHz
Intel® Celeron™ N2807, 1.58 GHz
Chipset
Intel® System on Chip
System Memory
DDR3L 1333 SODIMM slot x 1, up to 8 GB
(J1900) or 4 GB (N2807)
Display Interface
HDMI (max. 1920 x 1080)
Storage Device
CFast™
Ethernet
Intel® I211, 10/100/1000Base-TX x 4
I/O
RS-232 x 1
USB 2.0 x 2
USB 3.0 x 1
HDMI x 2 LAN x 4
CFast slot x 1
Antenna holes x 1
Power button
Power input
Expansion
Full-size Mini-Card (USB interface only) x 1
Indicator
Power LED on power button
OS support
Windows® 10, Windows® 8.1, Windows® 7,
Windows® Embedded 8, Windows®
Embedded 7, Linux Fedora
Chapter 1 Product Specifications 3
Embedded Box PC
BOXER
-
6404
Power Supply
Power Requirement
12V with lockable DC jack
Mechanical
Mounting
VESA (Mounting kit is optional)
DIN rail (Mounting kit is optional)
Dimensions (W x H x D)
6.53" x 4.20" x 1.18" (166 mm x 106.6 mm x 30
mm)
Gross Weight
2.9 lb (1.3 kg)
Net Weight
1.9 lb (0.86 kg)
Environmental
Operating Temperature
-22°F ~ 149°F (-30°C ~ 65°C) with wide
temperature CFast™ card (according to
IEC68-2-14 with 0.5 m/s AirFlow; with industrial
devices)
Storage Temperature
-22°F ~ 176°F (-30°C ~ 80°C)
Storage Humidity
95% @ 40°C, non-condensing
Anti-Vibration
5 Grms/ 5 ~ 500Hz/ operation CFast™ card
Certification
CE/FCC class A
Embedded Box PC
BOXER
-
6404
Chapter 2
Chapter 2 Hardware Information
Chapter 2 Hardware Information 5
Embedded Box PC
BOXER
-
6404
2.1 Dimensions
Chapter 2 Hardware Information 6
Embedded Box PC
BOXER
-
6404
2.2 List of Jumpers
Please refer to the table below for all of the systems jumpers that you can configure
for your application
Label
Function
JP12 (1,3,5)
Clear CMOS Jumper
JP12 (2,4,6)
Auto Power Button Enable/ Disable Selection
SW1
Push Power Button with Orange LED
Chapter 2 Hardware Information 7
Embedded Box PC
BOXER
-
6404
2.2.1 Clear CMOS Jumper (JP12, pin 1,3,5)
2.2.2 Auto Power Button Enable/ Disable Selection (JP12, pin 2,4,6)
Enable
Disable (Default)
2.2.3 Push Power Button with Orange LED (SW1)
Pin
Pin Name
Signal Type
Signal Level
L1
+V5S
IN
+5V
L2
GND
GND
GND
1
NC
2
PWRBTN#
OUT
3
GND
GND
GND
4
NC
5
NC
6
NC
Normal (Default)
Clear CMOS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81

Aaeon BOXER-6404 User manual

Type
User manual

Aaeon BOXER-6404 is an embedded Box PC supporting the 6th/7th Generation Intel® Core™ i7/i5/i3 LGA1151 Socket Type processors and the Intel® H110 Chipset. It can carry up to 16GB of DDR3L SO-DIMM and comes with four USB 3.0 ports, four USB 2.0 ports, two HDMI ports, two COM ports, and four LAN (RJ-45) ports, supporting different expansion and application scenarios, making it an ideal choice for applications such as industrial automation, digital signage, and POS/KIOSK systems.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI