CJB WEX-E38451 User manual

Type
User manual
WEX-E38451
Intel Atom E3845
Rev.01, Oct. 2015
1
Revision
Date
Comment
Rev. 01
2015/10/26
Release
Document revision history
2
The information in this document is subject to change without prior notice in order to
improve reliability, design and function; moreover, the information does not represent
a commitment on the part of the manufacturer.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this material including the product and software are available in
this publication may be reproduced or transcribed in any form or by any means
without the prior written permission of the publisher.
All registered trademarks and product names mentioned herein are used for
identification purposes only and may be trademarks or registered trademarks of their
respective owners.
Trademarks
Copyright Notice
3
ï‚Ÿ AMI is a registered trademark of AMI Software International Inc.
ï‚Ÿ Intel is registered trademarks of Intel Corporation.
ï‚Ÿ Microsoft Windows is a registered trademark of Microsoft Corporation.
ï‚Ÿ FINTEK is a registered trademark of FINTEK Electronics Corporation.
ï‚Ÿ REALTEK is a registered trademark of REALTEK Electronics Corporation.
ï‚Ÿ All other product names or trademarks are properties of their respective owners.
Lithium-Ion Battery Warning
CAUTION
Please replace with the same or equivalent type recommended by the manufacturer.
Do not crush, puncture, incinerate, or short circuit external contacts.
Do not dispose of in fire or expose to excess heat.
Acknowledgement
4
WEX-E38451
Driver CD (Include user manual)
1 x PS/2 Y Cable (Keyboard and Mouse)
1 x 2 Ports COM Cable with Bracket
1 x USB2.0 Cable with Bracket (for pin-header)
1 x USB2.0 Cable with Bracket (for box-header)
1 x SATA Cable
Optional Accessory
Packing List
5
Contents
Chapter 1 Product Information ......................................................................... 8
1.1 Block Diagram ............................................................................. 8
1.2 Features ........................................................................................ 9
1.3 PCB Layout ................................................................................. 12
1.4 Dimensions ................................................................................. 14
1.5 Jumper Setting ........................................................................... 15
1.6 Connector Function List ............................................................ 17
1.7 Connector Definitions ............................................................... 19
1.8 I/O Ports Power Output (max.) ................................................. 35
Chapter 2 BIOS Setup ...................................................................................... 37
2.1 Main Menu ................................................................................. 37
2.2 Advanced Menu ....................................................................... 38
2.3 ACPI Settings .............................................................................. 40
2.4 Super IO Configuration ............................................................. 41
2.5 Serial Port 1 Configuration ........................................................ 42
2.6 Serial Port 2 Configuration ........................................................ 43
2.7 Serial Port 3 Configuration ........................................................ 44
2.8 Hardware Monitor ..................................................................... 45
2.9 Smart Fan Mode Configuration ................................................ 46
2.10 CPU Configuration ................................................................... 47
2.11 IDE Configuration .................................................................... 48
2.12 Network Stack Configuration ................................................. 50
2.13 CSM Configuration .................................................................. 51
2.14 USB Configuration .................................................................... 53
2.15 Chipset ..................................................................................... 55
2.16 North Bridge ............................................................................. 56
2.17 Intel IGD Configuration ........................................................... 57
2.18 South Bridge ............................................................................. 60
2.19 USB Configuration .................................................................. 61
2.20 PCI Express Configuration ...................................................... 62
2.21 Password Configuration .......................................................... 63
2.22 Boot Configuration .................................................................. 64
2.23 Exit Manu .................................................................................. 65
Chapter 3 Drivers Installation .......................................................................... 66
3.1 Intel Chipset Device Software .................................................. 66
6
3.2 Intel Graphic Media Accelerator Driver ................................. 69
3.3 LAN Driver .................................................................................. 72
3.4 Audio Driver ............................................................................... 75
3.5 USB Driver ................................................................................... 76
Appendix A: Watch Dog Timer ....................................................................... 79
Appendix B: GPIO ............................................................................................ 82
7
Chapter 1 Product Information
This chapter introduces the product features, jumper and connector information.
1.1 Block Diagram
8
1.2 Features
System Processor/
Chipsets
Processor
Intel
®
Atomâ„¢ Processor E3845 Product
1.91GHz Quad-Core SoC (10W)
Intel
®
Atomâ„¢ Processor E3825 Product
1.33GHz Dual-Core SoC (6W)
FCBGA1170 Package 25.0mm x 27.0mm
BIOS
AMI BIOS, 64Mbit SPI Low Power Flash ROM
Memory
Technology
Atomâ„¢ Processors DDR3L 1333 MT/s (E3845)
Atomâ„¢ Processors DDR3L 1066 MT/s (E3825)
DDR3L DRAM Device Technology (+1.35V)
- Standard 1Gb/2Gb/4Gb technologies and addressing.
- Read latency 5, 6, 7, 8, 9, 10, 11.
- Write latency 5, 6, 7, 8.
Max. Capacity
Up to 8GB DDR3L DRAM
Socket
1 (DDR3L SO-DIMM +1.35V)
Display
Chipset
Intel
®
7
th
generation (Gen 7) graphics and media
encode/decode engine
VRAM
Shared system memory up to 512MB (max.)
LVDS
18/24bit, Dual Channel
Max. resolution up to 1920x1200 @ 60Hz
VGA
Analog Display:
Max. resolution up to 2560x1600 @ 60Hz
HDMI
Digital Display:
Max. resolution up to 1920x1200 @ 60Hz
Any 2
Displays
(1) LVDS + VGA
(2) LVDS + HDMI
(3) HDMI + VGA
Ethernet
Interface
PCIe x1 Gigabit LAN 10/100/1000 Mb/s
Controller
LAN1: Intel
®
Ethernet Controller I210
LAN2: Intel
®
Ethernet Controller I210
9
Audio
Interface
Intel
®
High Definition Audio
Controller
Realtek
®
ALC662-VD0 HD Audio Codec
SATA
Max. Data
Transfer Rate
SATA II:3.0Gb/s
Port
1 x SATA II,
1 x mSATA (Share MINI-PCIE slot)
Integrated AHCI controller
Expansion Slot
Mini-PCIE
1 x Full-size Mini-PCIe with mSATA supported
1 x Half-size Mini-PCIe
Rear I/O
VGA
1
COM
1 (RS-232/422/485)
1. COM1 RS-422/485 support Half and Full Duplex.
2. COM1 RS-232 Slew Rate 1Mbps (max.).
3. COM1 RS-422/485 Slew Rate 20Mbps (max.).
HDMI
1
LAN
2 (RJ45)
USB 2.0
1
USB 3.0
1
Onboard Conn.
and Pin-Header
COM
2 (RS-232)
DIO
4-in/4-out (sink 6A x2)
FRONT
1 (Power/HDD/Suspend-LED/PwrBTN/RstBTN)
HD Audio
1 (Line-in/MIC-in/Line-out)
PS/2
1 (Keyboard and Mouse)
SMBus
1
USB 2.0
4
10
Power
DC Input
+12Vdc ~ +24Vdc
Connector
ATX 4P
Watchdog Timer
Interval
Programmable 1~255 sec/min
Output
System reset
Energy
ErP/EuP
ErP/EuP 2013 Ready
Power off mode (G3) < 0.5W
Environment
Operating
Temp.
0°C ~ +60°C (standard)
-20°C ~ 70°C (optional)
-40°C ~ 70°C (optional)
Storage
Temp.
-40°C ~ 85°C (non-condensing)
Relative
Humidity
0% ~ 95% (non-condensing)
Form Factor
Dimension
(L x W)
3.5‖ SBC
102mm x 146mm (4.02‖ x 5.75‖)
*** WEX-E38451 base unit will be RoHS compliant from LP/MP phase.
*** The content is subjected to change without notice.
11
1.3 PCB Layout
Top View
CPUFAN FRONT LPC_SPI JLVDS
INV JPLVDS LVDS COM3 COM2 AUDIO
LAN2LAN1USB1HDMIVGACOM1
PWR1
CHA-DIMM
USB3
USB2
DIO
SATA
SATAPWR
MINI-PCIE2
MINI-PCIE1
SMB
BZ
BAT
JTRTC
JCMOS
JPWR
KB_MS
12
Bottom View
Rear I/O View
CPU
COM1
VGA
HDMI
USB1
LAN1
LAN2
13
1.4 Dimensions
14
1.5 Jumper Setting
JCMOS: CMOS Clear Selection
Pin No.
1-2
2-3
Function
Normal Operation (Default)
Clear CMOS Contents
Jumper
Setting
JTRTC: RTC Test Selection
Pin No.
1-2
2-3
Function
Normal Operation (Default)
Clear RTC Register Contents
Jumper
Setting
JPLVDS: LCD Panel Power (+3.3V/+5V/+12V) Selection
Pin No.
1-3
3-4
3-5
Function
LCD Power +3.3V
(Default)
12V
LCD Power +5V
Jumper
Setting
JPWR: AT/ATX Mode Selection
Pin No.
1-2
2-3
Function
AT Mode
ATX Mode (Default)
Jumper
Setting
1
2
3
1
2
3
1
2
3
1
2
3
1 3 5
2 4
1 3
2 4
1 3 5
2 4
1
2
3
1
2
3
15
JLVDS: LCD Panel Type Selection
Jumper Setting
LCD Panel Type
Jumper Setting
LCD Panel Type
800 x 600
18bit
(Default)
1024 x 768
18bit
1024 x 768
24bit
1280 x 768
18bit
1280 x 800
18bit
1280 x 960
18bit
1280 x 1024
24bit
1366 x 768
18bit
1366 x 768
24bit
1440 x 900
24bit
1440 x 1050
24bit
1600 x 900
24bit
1680 x 1050
24bit
1600 x 1200
24bit
1920 x 1080
24bit
1920 x 1200
24bit
16
1.6 Connector Function List
Rear I/O Port List
Connector
Function
Note
COM1
COM1, RS-232/422/485 serial port (DB9) connector
HDMI
HDMI, HDMI connector
LAN1
LAN1, RJ45 (LAN) connenctor
LAN2
LAN2, RJ45 (LAN) connenctor
USB1
USB1, USB3.0 x1 / USB2.0 x1 connenctor
VGA
VGA, VGA (DB15) connector
OnBoard Expansion Slot List
Connector
Function
Note
CHA-DIMM
DDR3L SO-DIMM slot
MINI-PCIE1
Mini-PCIe Express (half-size)
MINI-PCIE2
Mini-PCIe Express (full-size) / mSATA slot (share)
OnBoard I/O Connector List (1/2)
Connector
Function
Note
AUDIO
Line-in / MIC-in / Line-out with box-header
BAT
CMOS BAT (CR2032) with box-header
BZ
Buzzer with pin-header
COM2, COM3
RS-232 serial ports with box-header
CPUFAN
CPU FAN 4-pin connector
DIO
Digital I/O with pin-header
FRONT
Front Panel with pin-header
INV
LCD inverter with box-header (+12V)
KB_MS
PS/2 keyboard and mouse with box-header
LVDS
LCD panel LVDS 18/24bit connector
PWR1
ATX +12VDC~+24VDC 2x2pin (4-pole) connector
SATA
SATA 2.0 port connector
17
OnBoard I/O Connector List (2/2)
Connector
Function
Note
SATAPWR
SATA power with box-header (+5V and +12V)
SMB
SMBus with pin-header
USB2
USB2.0 with pin-header
USB3
USB2.0 with box-header
LPC_SPI
Reserved for debug with box-header
18
1.7 Connector Definitions
The following sections provide pin definitions and detailed description of all on-board
connectors. The connector definitions follow the following notation:
Column
Name
Description
Pin
Shows the pin-numbers in the connector. The graphical layout of the
connector definition tables is made similar to the physical connectors.
Type
Al
Analog Input.
AO
Analog Output.
I
Input, TTL compatible if nothing else stated.
IO
Input / Output TTL compatible if nothing else stated.
IOT
Bi-directional tri-state IO pin.
IS
Schmitt-trigger input, TTL compatible.
IOC
Input / open-collector Output, TTL compatible.
IOD
Input / Output, CMOS level Schmitt-triggered (open drain output).
NC
Pin not connected.
O
Output, TTL compatible.
OC
Output, open-collector or open-drain, TTL compatible.
OT
Output with tri-state capability, TTL compatible.
DIFF
Differential Signal.
PWR
Power supply or ground reference pins.
Signal
The mnemonic name of the signal at the current pin. The notation ―XX#‖
states that the signal ―XX‖ is active low.
Note
Special remarks concerning the signal.
The abbreviation TBD is used for specifications which are not available yet or which are not
sufficiently specified by the component vendors.
19
Rear I/O Port Pin Define
COM1: RS-232/422/485 Serial Port (DB9) Connector
COM1
Pin
Type
Signal
Note
RS-232
RS-422/
485 Full
RS-485
Half
1
I
Data Carrier Detect
(DCD)
TX D-
DATA-
COM1
RS-232
RS-422
RS-485
2
I
Received Data (RXD)
TX D+
DATA+
3
O
Transmitted Data (TXD)
RX D+
4
O
Data Terminal Ready
(DTR)
RX D-
5
PWR
Ground
6
I
Data Set Ready (DSR)
7
O
Request To Send (RTS)
8
I
Clear To Send (CTS)
9
I
Ring Indicator (RI#)
HDMI: HDMI Connector
HDMI
Pin
Type
Signal
Note
1
DIFF
HDMI TMDS2+
2
PWR
Ground
3
DIFF
HDMI TMDS2-
4
DIFF
HDMI TMDS1+
5
PWR
Ground
6
DIFF
HDMI TMDS1-
7
DIFF
HDMI TMDS0+
8
PWR
Ground
9
DIFF
HDMI TMDS0-
10
DIFF
HDMI TMDS_CLK+
11
PWR
Ground
12
DIFF
HDMI TMDS_CLK-
13
NC
Not connected
14
NC
Not connected
15
IO
HDMI DDC clock
1
16
IO
HDMI DDC data
1
17
PWR
Ground
18
PWR
HDMI power +5V
19
I
HDMI Hot plug detect
Note 1: HDMI port pin.15 (DDC Clock) and pin.16 (DDC Data) pull-up +5V/2.2KΩ.
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84

CJB WEX-E38451 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI